Producent:
(Kategoria: 102)
turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Długość toczenia: 1500 mmWielkości Przebieg obrótliwy nad stołem: 490 mm średnica toczenia nad ślizgiem czołowym: 280 mm Sterowanie: Heidenhain Manual Plus Zakres prędkości - do: 3000 U/wrocionko: 65 mmmoc mocy - moc obrabianego elementu: 12/16 (100/60%) kWwaga maszyny ok.: 3,5 tWyposażenie/akcesoria:- Podpórka - Uchwyt - Uchwyty narzędziowe - Wiertła - Końcówki - Uchwyt MultifixDane do tej reklamy zostały stworzone za pomocą ModulMWS - rozwiązania programowego LogoTech oHG.
turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...
turning diameter: 300 mmturning length: 600 mmcontrol: FANUC, 18i-TB turning diameter over bed slide: 230 mmtravel x1: 165 mmtravel z1: 700 mmtravel x2: 190 mmtravel z2: 720 mmtravel -y axis: +/- 50 mmmain spindle bore: 76 mmmain spindle speed: 5.000 U/minmain spindle drive: 22 kWmax. torque on the spindle: 208 Nmsub spindle bore: 76 mmsub spindle speed: 5.000 U/minsub spindle drive: 22 kWmax. torque on the spindle: 208 Nmtool turret: 2 x 12 Stat.number of driven tool stations: 2 x 12 speed of driven tools: 5.000 U/minmax. torque: 47 Nmwork piece power: 5,5 kWC-axis resolution: 0,001 °rapid traverse x + z axis: 20 / 40 m/minrapid traverse y-axis: 7,5 m/mintotal power requirement: 68,4 kVAAccessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, ...
turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...
faceplate diameter: 850 mmswing diameter: 1200 mmturning height: 1000 mmControl: Siemens type: 840 D Tool changer: 36 Pos.x-travel: 870 mmz-travel: 1020 mm: live tooling: c-axis: 0weight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 455 mmturning diameter over slide rest: 285 mmturning length: 1.000 mmcenter height over bed: 225 mmcentre distance: 1.000 mmdigital readout: 2-Achsen ANILAMbed width: 330 mmspindle taper: KK 6 DIN 55027spindle bore: 45 mmturning speed range: 16 - 1.000 U/minpower requirement: 3,0 / 4,2 kWtaper in tailstock-quill: MK 4 dia. of quill: 62 mmquill stroke: 145 mmcoolant: voltage: 400 Vtotal power requirement: 4,5 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 2,45 x 1,10 x 1,80 m- Serial-No.: 29-2561- ANILAM 2-axis digital readout- 4-jaw tool holder- coolant equipmentATTENTION!Machine is sold without a chuck.Upon request and for an additional charge,the following 3-jaw spiral chuckscan be included:- CENTER Ø 200 mm = 780.00 EUR- CENTER Ø 250 mm = 1,030.00 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 376 mmturning length: 760 mmcontrol: Fanuc x-axis: 260 mmz-axis: 830 mmtotal power requirement: kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Średnica toczenia: 430 mm, długość toczenia: 519-525 mm, sterowanie: Mori seiki MSX-805, oś x: 230 mmz, oś: 520 mm, całkowite zapotrzebowanie mocy: kWweight maszyny: ok: 4100 kgwymiary maszyny: ok: mDane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 315 mmturning length: 1000 mmcontrol: Siemens type: Sinumerik 802 Dturning diameter over slide: 160 mmspindle hollow: 52 mmTool changer: 12 turning speeds: 30-3300 U/minchip conveyor: total power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: mMachine has been overhauledDie techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor, es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen.Über unsmehr als 400 eigene Maschinen im Lagerüber 15.000 m² Lagerfläche, Krankapazität 70 tmehr als 10.000 Artikel Zubehör für Ihre WerkstattSie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen,dann sprechen Sie uns an.Weitere Angebote finden Sie auf unserer Webseite.Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Mar ...
turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...
turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Średnica toczenia: 550 mm, długość toczenia: 1500 mm, sterowanie: Fagor 8055, oś x: 108 mmz, oś: 3000 mm, całkowite zapotrzebowanie mocy: kWweight maszyny, ca: wymiary maszyny: m: dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
Średnica toczenia: 400 mmDługość toczenia: 1000 mm Średnica wahania nad ślizgiem: 400 mm Średnica toczenia nad suwakiem: 225 mm szerokość łożyska: 433 mm Średnica wrzecienia: 56 mm Całkowite zapotrzebowanie mocy: 7,4 kW masy maszyny ok: 2,5 x 0,9 x 1,3 m Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
turning diameter: 500 mmturning length: 1000 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,1 tAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mmturning length: 230 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc controlat each spindle is a 3-jaw chuck mounted2x 12-fold revolverchip conveyorcoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 500 mmmax. Drehdurchmesser / max. turning diameter 400 mmmax. Drehlänge / max. turning length 230 mmX-Weg / X-travel 220 mmZ-Weg / Z-travel 230 mmmax. Drehzahl der Spindeln / max. spindle speed of the spindles 2000 UpM /rpmAnzahl der Revolverplätze / number of tool places 2x 12 Eilgang x, z / rapid feed x, z 30, 30 m/minAntriebsleistung Spindeln / drive capacity spindles 18,5/15 kWGewicht ca. / weight ca. 9400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, acces ...
Średnica toczenia: 5-42 mm, długość toczenia: 3200 mm, sterowanie: Traub TX8i oś x: 50 mmz, oś: 50 mm, całkowite zapotrzebowanie mocy: kWweight maszyny: ok: 4000 kgwymiary maszyny: m: dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
Średnica toczenia: 1,320 mm Długość toczenia: 5000 mm Średnica wahania: 1250 mm Waga elementu: 14 Średnica obrotowa nad ślizgiem: 900 - 950 mm Całkowite zapotrzebowanie mocy: 45 kWweight maszyny: ok.: 18 t Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
Średnica toczenia nad stołem: 340 mm Średnica obrotu nad podpórką suwaka: 177 mm Długość toczenia: 630 mm prędkość obrotowa wrzeciona - bezstopniowa: 55-3000 U/minweight maszyny, ok.: 1,55 wymiarów maszyny: 2 x 1 x 1,6 mCyfrowy odczyt HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch Dane do tej reklamy zostały stworzone za pomocą ModulMWS – rozwiązania programowego LogoTech oHG.
turning diameter: 400 mmturning length: 635 mmcontrol: Heidenhain Eltropilot greates pass round over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmdrive of main spindle: 21 kWmax. torque on the spindle: 240 Nmmain spindle speeds:: 25-5.000 turning speed range - C-axis: 100 U/minworkpiece system 12-station turret head: feed power in the axis x + z: 3,5 / 7 Nrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mincoolant device with chip conveyor: total power requirement: 44 kvaweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 815 mmturning length: 3000 mmcontrol: ECS 2402 swing over bed: 815 mmcentre distance: 3000 mmswing diameter over slide rest: 485 mmspindle bore: 137 mmspindle turning speed range: 1200 U/minrapid traverse: 5 m/minspindle motor: 28 kWtailstock quill diameter: 115 mmtailstock quill stroke: 250 mmtotal power requirement: 30 kWweight of the machine ca.: 7,0 tdimensions of the machine ca.: 5,87 x 2,10 x 2,10 mEquipment: CNC-control E.C.S. 2402 3-jaw chuck 4-jaw faceplate, diameter 700 mm 4-jaw faceplate, diameter 400 mm 3 Steady rests Chip ConveyorWithout boring bar holder and boring bar.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
