Producent:
(Kategoria: 102)
turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TEN GILDERMEISTER CTX 310 MA WYŁĄCZNIE OBRABIANY PLASTIK Maszyna jest wyposażona w: - przenośnik chipów - ogony - Oś C 0,001° - Narzędzia żywe (4500 obr./min) - Siemens ShopTurn Auction-ID: A1-50690-6
Główne wrzeciono: - Obroty wrzeciona: 4000 obr./min - moc silnika wrzecionowego: 18,5kW - Oś C: 0,001° Podwrzeciono: - Prędkość wrzeciona: 6000 obr./min - moc silnika wrzeciona: 10 kW - Oś C: 0,001° Wieżyczka: - 12 stanowisk - Narzędzia pod napięciem (4500 obr./min, 5,5kW) - Narzędzia w wieży nie są dołączone! Sprzęt wyposażony w: - przenośnik chipów - karmnik barowy - narzędzia żywe - wrzeciono podwrzeciono - Oś Y (-51mm ~ +51mm) - łapacz części - Otwórca narzędzi Auction-ID: A1-50690-24
Maszyna jest wyposażona w: - przenośnik chipów - końców - Uchwyt 225mm SMW AUTOBLOK - narzędzia pokazane na zdjęciach Auction-ID: A1-50690-13
TEN GILDERMEISTER CTX 310 MA WYŁĄCZNIE OBRABIANY PLASTIK Maszyna jest wyposażona w: - przenośnik chipów - ogony - Oś C 0,001° - Narzędzia żywe (4500 obr./min) - Siemens ShopTurn Auction-ID: A1-50690-7
Maszyna jest wyposażona w: - przenośnik chipów - końców - Otwórca narzędzi - Uchwyt 254 mm Filtr mgiełkowy nie jest dołączony Auction-ID: A1-50690-9
Maszyna jest wyposażona w: - przenośnik chipów - końców - Otwórca narzędzi - Collet Chuck - filtr mgiełkowy Auction-ID: A1-50690-10
Maszyna jest wyposażona w: - przenośnik chipów - końców - Uchwyt 254 mm Auction-ID: A1-50690-14
Maszyna jest wyposażona w: - przenośnik chipów - końców - 4 Szczękowy Mechanizm Auction-ID: A1-50690-4
Maszyna jest wyposażona w: - 380mm ostrzał - końców - 3 Uchwyty narzędziowe Auction-ID: A1-50690-21
PRZEPUSTOWOŚĆ: Huśtawka nad łóżkiem: 630 mm Kołysanie siodła: 500 mm Zalecana średnica toczenia: 255 mm Maksymalna średnica toczenia: 420 mm Maksymalna długość toczenia: 1 030 mm Średnica robocza pręta: 76 mm PODRÓŻE: Ruch osi X: 242 mm Ruch osi Z: 1 100 mm GŁÓWNE WRZECIONO: Prędkość obrotowa: 3 500 obr./min Nos wrzecionowy: ASA A2#8 Średnica łożyska wrzeciona: 130/120 mm Średnica wrzeciona przez otwór: 86 mm Minimalny kąt indeksowania wrzeciona (oś C): 0,001° WIEŻA: Nie. stanowisk narzędziowych: 12 Rozmiar narzędzia OD: 25 mm Średnica pręta wiercniczego: 40 mm Czas indeksowania: 0,15 sekundy Prędkość obrotowa wrzeciona narzędziowego: 5 000 obr./min OGON: Średnica pióra: 100 mm Stożek otworu pióra: MT#5 Ruch pióra: 100 mm PRZEPŁYWNOŚĆ: Szybki obrót (oś X/Z): 20/24 m/min SILNIKI: Główny silnik wrzecionowy: 18,5/2 ...
Maszyna jest wyposażona w: - końców Auction-ID: A1-50690-23
Maszyna jest wyposażona w: - przenośnik chipów - końców - Otwórca narzędzi - Uchwyt 254 mm Auction-ID: A1-50690-11
turning diameter over bed: 297 mmturning diameter over slide rest: 160 mmturning length: 500 mmspindle bore: 36 mmturning speeds: 30 - 3550 U/minspindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,511,5 mOn customer order - Private machine - Accessories:3-jaw chuck4-jaw chuckCollet chuck with lever clampingMultifix A + various holdersOperating toolVarious turning toolsOriginal documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 0.2 - 4 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 680 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Ind ...
turning diameter: 186 mmturning length: 350 mmcontrol: FANUC O/T turning speeds: 4.000 U/minspindle bore: 61,0 mmtool holder: 12 Stückchucking diameter: 170 mmoperating hours: htotal power requirement: 7,5 kWweight of the machine ca.: 2,4 t- FANUC - CNC control- SMB 600 bar feeder with magazine- Chip conveyor- 3-jaw lathe chuck, 170 mm- MK 4 tailstock- Various tool holders- Cooling system- Full enclosureThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FAGOR 8055 TC workpiece weight: 10.000 kghandwheel: inkl. Chip coveyor: inkl. centre height: 500 mmgreates pass round over bed: 1300 mmSwing diameter face slide: 1000 mmcentre distance: 5000 mmtravel of cross-slide: 680 mmrapid traverse x + z axis: 8 m/minbed width: 900 mmspindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpmspindle bore: 104 mmspindle diameter in front bearing: 180 mmturning speed range:: Anzahl 4 main drive: 37 kWTorque: 10.000 Nm: Sauter 300 x 300 diameter of quill: 180 mmquill stroke: 300 mmHeight: BIS ZUR FLACHFÜHRUNG 805 mmtotal power requirement: 45 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mEquipment-4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was created with ...
turning diameter: 660/275 mmturning length: 1498 mmcontrol: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mm9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Islands and pocket program ...
turning diameter: 570 mmturning length: 1000 mmcontrol: MANUALplus 620 swing diameter over face slide: 340 mmspindle bore: 93 mmspindle turning speed range: 1 - 3000 U/mintransmission ratio: 2 rapid power traverse in X-and Z direction: 7 / 10 m/minmax. workpiece weight -without tailstock: 500 kgmax. workpiece weight between centres: 1000 kgworkpiece weight in steadies max.: 1250 kgmain drive motor: (100/60% ED) 20 / 25 kWDimensions (LxWxH): 2,94 x 2,20 x 1,96 mmax. torque on the spindle: ca. 1400 Nmweight of the machine ca.: 3,4 t HEIDENHAIN MANUALplus 620 control system- Control system expansion for ICP and DIN programs, incl. thread repair Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm,mounted in front of the turning center (limits achievable turning diameterand tailstock operations, reduces turning length) 2-speed planetary gearbox, automatic shifting Main s ...
: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 320 mmturning length: 305 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 4000 mmturning diameter over slide rest: 3500 mmturning length: 30000 mmcentre height: 2000 mmworkpiece weight: 160 tbed width: - mmbed height over floor: - spindle turning speed range: 0,5 - 80 U/minmain drive motor: - kWfaceplate diameter: - mmControl: Siemens 840D total power requirement: - kVAweight of the machine ca.: 160 t2006 modernized/Overhauled and equipped with:- 4-guides bedway- CNC Control Siemens 840D- Face Plate- Counter StayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 385 mmmax. turning diameter: 620 mmturning length: 958 mmcontrol: MSD 501 II Mori Seikigreates pass round over bed: 710 mmSwing dia. over traverse guideway: 738 mmcentre distance: 1.125 mmMain spindle:: turning speed range - main spindle: 10 - 1.600 min/-1power capacity - main spindel: 30 / 22 kWspindle bearing diameter: 180 mmspindle bore: 130 mmspindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mmz-axis: 995 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 60 mmturret change time: 0,4 sec.Tailstock:: tailstock adjustment: 850 mmdia. of quill: 110 mmtaper of center: MK 5 quill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 24 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,0 x 2,5 x 2,5 mDocuments: Chip conveyor: Tail ...
turning diameter: 620 mmturning length: 2000 mmcontrol: MSX 501 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 510 mmturning diameter over slide rest: 310 mmcentre distance: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mm3-jaw chuck (diameter 250mm)tool holder devicetail stock 3x steady restTechnische Daten / technical details:Spitzenweite / center to center 2000 mmUmlaufdurchmesser über Bett / rotary diameter over bed 510 mmUmlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mmSpindelbohrung / spindle hole 52 mmDrehzahlbereich / spindle speed 44-2240 UpM /rpmGewicht der Maschine ca. / weight ca. 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mmswing diameter: 3300 mmturning height: 2200 mmworkpiece weight: 15000 kgvertical adjustment of the crossrail: 1600 mmturning speed range - faceplate: 1 - 90 U/minmain drive motor: 60 kWram head swiveling: +/- 35 °ram head - cross travel: 1200 mmram head - vertical travel: 720 mmfeed range: 1 - 3000 mm/minControl: FANUC 0i-TF total power requirement: ca 70 kWweight of the machine ca.: 41 tdimensions of the machine ca.: 4,8 x 4,8 x 5 mComplete overhaul in 2026- CNC FANUC 0i-TF- 1 ram on crossbeam- 4 clamping jaws for face plate- CE-- mechanical overhaul of all components (adjustment of the geometricalparameters of the machine according to ISO 3655)-- Grinding of the guides-- New telescopic covers-- FANUC main motor-- new electrics and CNC control-- new Fanuc servomotors-- ball screws dia. 50mm-- new hydraulicsThe data for this ad was created with ModulMWS - the ...
faceplate diameter: 5000 mmswing diameter: 8000 mmturning height: 4000 mmram head dimension: 360 x 360 mmfaceplate turning speed range: 0,6 - 60 U/minworkpiece weight: 160 tmain drive motor: 2x 70 kWcontrol: FANUC total power requirement: - kWweight of the machine ca.: 85 tdimensions of the machine ca.: -- mThe machine will be overhauled and modernised (upon order) and fitted with:- Fanuc CNC control system (latest model)- New electrical system- New hydraulic components: pumps, lubrication systems, hoses, valves, etc.- All assemblies and sub-assemblies will be cleaned, inspected and replaced where necessary.- 2 rams supports on the crossbeamCROSS-RAIL TOOL HEAD (ARM TOOL CARRIAGE)- Axial ram travel (Ram stroke) — 2500 mm- Horizontal carriage travel — 3400 mm- Swivel angle / Tiltability — 15 - 45°- Cross-rail travel (Arm travel) — 3600 mm- Saddle travel — 6500 mmSIDE TOOL HEAD- ...
faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 2060 mmworkpiece weight max.: 18000 kgfaceplate turning speed range -stepless-: 1,02 - 92 U/minrapid traverse of cross-rail: 2500 mm/minslide adjustment: 2400 mmmain drive motor: 60 kWControl: Fanuc 0iTF total power requirement: 75 kWweight of the machine ca.: 62,8 tdimensions of the machine ca.: 6,6 x 5,8 x 5,4 mOverhauled/modernized in 2026- Complete replace of hydraulic & lubrication installation- New ball screws installed- Replace of electric installation and of command- Mechanical elements retrofitted and grinding of guideways(adjustment of the geometrical parameters of the machine according to ISO 3655)equipped with:- CNC control FANUC 0iTF- FANUC Drives and MotorsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 540 mmturning length: 1020 mmcontrol: FANUC 18 i-TB swing diameter: mmbar diameter: 65 mmtravel -x axis: 555 / 185 mmtravel -y axis: 160 mmtravel -z axis: 1095 mmtravel -z axis (sub spindle): 1065 mmspindle speed:: 5000 / 5000 1/minspindle bore: 76 / 76 mmC-Axis: 360 x 0,001°/360 x 0,001° turret head: BMT 65P / 12 Pos. milling spindle turning speeds: 10000 U/minDriven Tools: 4.000 U/minb-axis: 240 °rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 24 m/mindrive capacity - spindle motor: 22 / 22 kWvoltage: 400 Vtoolpiece magazine: chain magazine: 40 Pos.tool taper: HSK-A 63 milling drive: 15 kWdriven Tools: 5,5 kWtotal power requirement: 60 kVAweight of the machine ca.: 12,5 tdimensions of the machine ca.: 4,30 x 2,30 x 2,90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 190 mmturning length: 620 mmcontrol: Fanuc 18 iT max. bar diameter through the spindel: 65 mmnumber of controlled axis: 9 y-axis: +/- 45 mmturning speed range: 4500 U/minpower capacity: 15/11 kWrapid speed: m/minswivelling range: +/- 91 ° Gradnumber of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/minSpindelpower on driven tool: 5,5/3,7 kWtail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: mweight of the machine ca.: 12,5 tCNC- lathe with sub spindle- 2 turrets, universal for main.- or sub- spindle- upper turret switchable- Y- axis on upper turret- both turrets with 12/24 positions- collet chucks on main- and sub spindle- chip conveyor- parts catcher typ A - few toolingsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5.000 € 
