Producent:
(Kategoria: 106)
pressure:125 tstroke:25 fix mmno. of strokes:70 - 700 /mindistance between columns:1150 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:1150 x 1000 mmhole in the table:900 x 220 mmside window:650 mmram surface:990 x 850 mmram adjustment:60 mmmaterial width:250 mmmaterial thickness:2,5 mmpower requirement:46,5 kWweight:29,5 troll feed:mechanical, Schuler, WK 8-250
Pressure:080 tthroat:380 mmstroke:8 - 112 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:472 mmtable surface area:840 x 610 mmtable height over floor:800 mmpassage to the back:520 mmram surface:650 x 400 mmram adjustment:70 mmpower capacity:7,5 kWweight:6,9 tDimensions (WxDxH):1,1 x 2,15 x 3,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical ram counterbalance:pneumatic clutch-/ brake combination:pneumatic
pressure:250 tdistance between columns:930 mmstroke:200 mmDistance table/ram, stroke up:600 mmtable surface area:900 x 860 mmdie cushion capacity:100 tdie cushion stroke:50 mmdie cushion area:350 x 400 mmtable height over floor:950 mmside window:380 x 380 mmram surface:850 x 700 mmfeed down:400 mm/sfeed up:400 mm/sworking feed:30 mm/soil volume:350 lpower capacity:45,0 kWweight:11,5 tDimensions (WxDxH):2,0 x 1,2 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary
pressure:1000 tdistance between columns:3030 mmstroke:350 mmDistance table/ram, max. stroke up, adjustment up:1400 mmtable surface area:3000 x 2000 mmtable height over floor:430 mmside window:1450 x 1400 mmram surface:3000 x 2000 mmspeed down:300 mm/sspeed up:340 mm/sworking speed:18 - 44 mm/sreturn capacity:120 toil volume:4400 lwidth with platform:4950 mmpower capacity:2 x 90,0 + 10,0 kWweight:87,0 tDimensions (WxDxH):4,35 x 3,65 x 7,55 mheight over floor:6,05 mheight beneath floor:1,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:200 tdistance between columns:1650 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1600 x 1250 mmdie cushion capacity:80 tdie cushion stroke:300 mmdie cushion area:1300 x 900 mmtable height over floor:800 mmram surface:1600 x 1250 mmoil volume:ca. 2000 lpower capacity:43,0 kWweight:25,0 tDimensions (WxDxH):2,9 x 2,3 x 5,8 mheight beneath floor:0,85 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
: neu : ca. 4 Monate ab Auftragse : Italien : 35400 €: 676.14 €: 40 to: 500 mm: 700x350 mm: 700x500 mm: 500 mm: 250 mm: 26 mm/s: 9 mm/s: 4 kW: 1500 mm: 1000 mm: 2500 mm: 1500 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,-Siemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € 900,-The data for this ad was cr ...
pressure:350 tdistance between columns:1350 mmstroke:900 mmdistance table/ram, max. stroke up, adjustment up:1300 mmtable surface area:1300 x 1000 mmpressure of drawing cushion in table:100 tstroke of drawing cushion in table:380 mmdie cushion area:350 x 285 mmcapacity of ejector in ram:25 tejector stroke in ram:200 mmtable height over floor:750 mmram surface:1300 x 1000 mmspeed down:500 mm/sspeed up:160 - 470 mm/sworking speed:16 - 44 mm/sdrawing speed:57 - 160 mm/sreturn capacity:32 toil volume:1700 lpower requirement:91,0 kWDimensions (WxDxH):3,75 x 2,8 x 7,2 mheight over floor:5,28 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary
: neu : ca. 4 Monate ab Auftragse : Italien : 71300 €: 1347.57 €: 60 to: 500 mm: 800x500 mm: 600 mm: 120 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1100 mm: 2350 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure at min. stroke:3 tthroat:150 mmstroke:- 39 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 380 mmpressure at min. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:790 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,2 tDimensions (WxDxH):0,5 x 0,9 x 1,4 m
: neu : ca. 4 Monate ab Auftragse : Italien : 78000 €: 1474.2 €: 85 to: 500 mm: 900x600 mm: 600 mm: 105 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 2250 mm: 1150 mm: 2400 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure at min. stroke:3 tthroat:150 mmstroke:- 40 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 250 mmpressure at max. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:810 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,15 tDimensions (WxDxH):0,7 x 0,8 x 1,4 m
Pressure:063 tthroat:250 mmstroke:8 - 100 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:700 x 500 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:320 mmram surface:450 x 280 mmram adjustment:63 mmweight:4,5 tDimensions (WxDxH):1,6 x 2,0 x 2,8 moverload protection in ram:mechanical
: neu : 2024 : 7305 : prompt, Zwischenverkauf v : Italien : 46400 €: 886.24 €: 1 : 100 to: 500 mm: 700 x 350 mm: 800 x 600 mm: 500 mm: 300 mm: 25 mm/s: 4 mm/s: 4 kW: 1900 mm: 1200 mm: 2600 mm: 2100 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualincl. pressure switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nowy
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 €: 1413.72 €: 40 to: 2050 mm: Y1 / Y2 / X und R Achse : 200 mm: 1700 mm: 350 mm: 440 mm: servomotorischer Spindela : 180 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 2600 mm: 1450 mm: 2650 mm: 4400 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...
pressure:65 tdistance between columns:930 mmstroke:1100 mmdistance table/ram, stroke up:2400 mmtable surface area:1340x700 / 930x1085 mmhole in the table:320x260 / 600x410 mmtable height over floor:850 mmside window:700 mmram surface:990 x 930 mmpower requirement:15,0 kWweight:8,0 tDimensions (WxDxH):2,8 x 2,6 x 5,2 mblank holder / ejector in ram:hydraulic side shifting device:hydraulic
Pressure:500 tdistance between columns:1550 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1200 x 1300 mmpressure of drawing cushion in table:250 tstroke of drawing cushion in table:150 mmdie cushion area:950 x 950 mmtable height over floor:1245 mmside window:1250 mmram surface:1200 x 1300 mmspeed down:750 mm/sspeed up:780 mm/sworking speed:105 mm/soil volume:4000 lpower requirement:263,0 kWweight:45,0 tDimensions (WxDxH):3,3 x 3,3 x 6,1 mheight over floor:6,1 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable
Pressure:315 tdistance between columns:1350 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1200 x 1300 mmtable height over floor:1245 mmside window:1250 mmram surface:1200 x 1300 mmspeed down:750 mm/sspeed up:680 mm/sworking speed:180 mm/soil volume:2000 lpower requirement:150,0 kWweight:35,0 tDimensions (WxDxH):3,3 x 3,3 x 5,5 mheight over floor:5,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch
pressure:200 tthroat:360 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:780 mmtable surface area:740 x 720 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:200 mmdie cushion area:530 x 530 mmtable height over floor:920 mmram surface:560 x 560 mmslide drill hole x depth:70 mmpower requirement:35,0 kWweight:10,0 tdimensions:1,3 x 2,0 x 3,4 m
pressure:160 tdistance between columns:1340 mmstroke:300 mmDistance table/ram, max. stroke up, adjustment up:620 mmtable surface area:1300 x 900 mmtable height over floor:930 mmside window:600 mmram surface:1300 x 900 mmspeed down:367 mm/sspeed up:390 mm/sworking speed:58 mm/spower requirement:30,0 kWweight:15,0 tDimensions (WxDxH):2,5 x 2,2 x 4,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary
pressure:063 tstroke:70 fix mmno. of strokes:15 - 60 /mindistance between columns:1340 mmwidth between oil collecting pans:1180 mmdistance table/ram, max. stroke up, adjustment up:328 mmtable surface area:1260 x 700 mmhole in the table:1000 x 100 mmtable height over floor:1000 mmcolumn travel -side:470 mmram surface:1300 x 650 mmram adjustment:100 mmpower requirement:27,5 kWweight:13,7 tDimensions (WxDxH):3,4 x 2,1 x 3,4 mclutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
Pressure:063 tthroat:250 mmstroke:10 - 100 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:700 x 500 mmhole in the table:180 x 140 mmtable height over floor:700 mmram surface:360 x 275 mmram adjustment:60 mmpower requirement:5,5 kWweight:3,8 tDimensions (WxDxH):1,9 x 1,7 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 €: 195.84 €: 150 to: fix : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2050 mm: 1000 mm: 2270 mm: 1870 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:150 tthroat:400 mmstroke:30 - 150 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:620 mmtable surface area:1000 x 750 mmhole in the table:320 x 200 mmtable height over floor:800 mmram surface:800 x 600 mmram adjustment:85 mmweight:10,0 tDimensions (WxDxH):1,4 x 2,2 x 3,1 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram counterbalance:pneumatic
nominal force:2500 tstroke:600 mmcycle time:13 - 18 sdistance between columns:1720 mmDistance table/ram, max. stroke up, adjustment up:2600 mmtable surface area:1720 x 1800 mmallowed max. force:4000 tblow die to die:5000 tram surface:2100 x 1320 mmcapacity of ejector in table:40 tejector stroke in table:250 mmejector surface area in table:900 x 820 mmcapacity of ejector in ram:6 tejector stroke in ram:40 mmspindle diameter:425 mmpower requirement:900,0 kWweight:335,0 tDimensions (WxDxH):3,4 x 4,6 x 9,7 mheight over floor:8,3 mfully-automated forging line:to produce axle shaft
: neu : 2025 : 080109 : prompt, Zwischenverkauf v : Türkei : 68282 €: 1135.89 €: 1 : 1 : 60100 €: 120 to: 3050 mm: Y1 / Y2 / X und R Achse : 180 mm: 2550 mm: 250 mm: 375 mm: hydraulisch : 100 mm/s: 9 mm/s: 77 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 878 mm: 104 mm: 150 l: 11 kW: 3750 mm: 1230 mm: 2400 mm: 5900 kg4 axes (Y1, Y2, X and R axes)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC controlled crowning tableintermediate clam ...
pressure:100 tthroat:380 mmstroke:650 mmdistance table/ram, max. stroke up, adjustment up:950 mmtable surface area:800 x 700 mmhole in the table:200 mmtable height over floor:920 mmram surface:630 x 600 mmspeed down:65 mm/sspeed up:375 mm/sworking speed:17 mm/soil volume:350 lpower requirement:18,5 kWweight:9,0 tDimensions (WxDxH):1,5 x 2,5 x 4,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20
: neu : ca. 4 Monate ab Auftragse : Italien : 62500 €: 1181.25 €: 150 to: 500 mm: 800x400 mm: 900x600 mm: 500 mm: 300 mm: 20 mm/s: 3 mm/s: 4 kW: 2200 mm: 1500 mm: 3000 mm: 5500 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € o ...
pressure:250 tdistance between columns:1125 mmstroke:250 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1100 x 900 mmpressure of drawing cushion in table:63 tstroke of drawing cushion in table:100 mmdie cushion area:700 x 400 mmtable height over floor:960 mmside window:700 mmram surface:1080 x 900 mmoil volume:1000 lpower requirement:35,0 kWweight:23,0 tDimensions (WxDxH):2,5 x 2,3 x 4,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary
: neu : ca. 4 Monate ab Auftragse : Italien : 104000 €: 1965.6 €: 125 to: 500 mm: 1200x700 mm: 600 mm: 115 mm/s: 7 mm/s: 70 mm/s: 15 kW: 2550 mm: 1500 mm: 2600 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
500 € 
