97 PERSKE używana maszyna na sprzedaż

Kilka silników frezujących Marka: Perske - w różnych wersjach dostępne z magazynu (od 0,2 do 8 kW) Cena na zapytanie (w zależności od wersji) Daj nam znać, jakiej specyfikacji szukasz: -moc - typu wałowego -moment obrotowy -typ -napięcie

Producent: Perske Umformer, Typ: DA 12-2, Amper 1: 43, Hz 1: 50, Hz 2: 100,

Producent: Perske Fräsmotor Hydrospindel, Typ: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Obroty: 2870/5880,

Producent: Homag, dla lewej strony maszyny: tak, dla prawej strony maszyny: tak, Liczba silników: 2, Silnik: Perske, kW-Leistung: 1-1,5, Volt/Hz: 220-380/50-100, Drehzahlen U/min: 2670/5710, Siko Anzeige: tak, Poziomy Rollentastung: nie, Pneumatycznie sterowany: nie, Wymiary wału L x D mm: 30, Suwany pionowo: tak, Silnik 2: Perske, kW-moc 2: 1,5, Volt/Hz 2: 220-380/50-100, Prędkość obrotów 2: 2670/5710, Wskazanie Silo 2: tak,

Producent: Perske Fräsmotor, Typ: KNS 70.12.-2-01, Btr:: 12-6,9, Schaltgr.: 50-100, ISO: 3/4,4, IP: 220-380, MdN Nm: 2880/5880, Motor mit Getriebe: tak, maszyna gotowa do demonstracji: Frässpindel 30 mit Keilnut 10 mm/ mit Aufsatzgetriebe für Höhere Drehzahlen/ein und Aussteuerbar,

Producent: Perske, Typ: KNS 70.12-2 D, Volt: 220/380/380, Hz 1: 50/100, Moc kW: 2,2/3,3, PM: 2860/5895, Wymiary wału L x D mm: 35 , Dostępne: sofort,

Producent: Perske Bohrmotor mit Getriebe, Konfiguracja systemu: Raster 16mm, mH/Hz: 200 Hz, Moc PpK= kW: 1,0 kW, WOLNY TEKST: ok. 60 mm piasta,

Producent: Perske Fräsmotor mit Hydrospannung, Typ: KRSV 61.13-2 D, Konstrukcja silnika kołnierzy: 4,5-7,5 kW , Konstrukcja silnika stopnego: U/min 9570-17550, średnica mm: Hz 167-300, średnica średnicy cylindra: Volt 194-350,

Producent: Perske, Typ: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Moc kW: 4-6, PM: 2870/5870,

Producent: Perske Fräsmotore verstärkte Ausführung, Rok: VS.42.20-2, Motor mit Getriebe: 794929, Sek:: IMA, Btr:: 794929, Seria: tak, Motor mit Getriebe: tak, Wysokość montażu: 133 V, Długość mm: 200 Hz, Rozciągnięcie mm mm: U/min 11530, Rok: VS.42.20-2

Producent: Perske Silnik frezarski z wrzecionem hydraulicznym, z maszyny: Homag, Volt: 380, Amper 1: 22,5/13/20, Hz 1: 50/100/120, kW Moc: 7-11,

Producent: Perske Fräsmotor mit Nutenstein Mitnehmer, typ: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, PMM: 2870/5870,

Producent: Perske Fräsmotor, Typ: KIS 51.14.-20, Model: 2,2 kW , Numer seryjny: 794997, Konfiguracja systemu: U/min 5650, Numer seryjny: 35 mm Fräspindel/abgesetzt auf 30 mm, Rok: siehe Bilder, Rok: siehe Bilder

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 6.6 kW 8915 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 35 mm -Dimensions: 520/247/H145 mm -Weight: 41 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Perske -Type: 35DW16/6 -Type: DA16/2 -Input: 380 V 50 Hz -Output: 133 V 200 Hz -Power: 35 KVA -Dimensions: 1000/520/H500 mm -Weight: 450 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Power: 0.22 kW at 17250 rpm at 300 Hz -Voltage: 133/200 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 20 mm -Tool: mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H155 mm -Weight: 4.2 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Perske, multi-spindle drilling head with drive -Drilling head: 18 spindles -Drill spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Number: 2x multi-spindle drilling head with drive available -Price: per piece -Dimensions total: 800/200/H575 mm -Weight: 67 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1120 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 985/290/H185 mm -Weight: 68 kg

Electric motor, three-phase motor -Manufacturer: Perske, electric motor type NS80.10/8/2 -Power: 0.37/1.5 kW -Speed: 700/2900 rpm -Shaft: Ø 19 mm -V-belt pulley: Berges, symmetrical Ø 160 mm adjustable pulley see photo -Protection class: IP 54 -Design: B3 -Dimensions: 400/250/H200 mm -Weight: 40 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Electric motor, luminous flux motor -Power: 1.1 kW -Speed: 2810 rpm -Shaft diameter: 16 mm -Construction: B5/14 -Protection class: -Dimensions: 275/165/H220 mm -Weight: 12.3 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21.05-2 with bracket -Power: 0,15 kW 11160 U/min -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Number: 2x milling motor available -Price: per piece -Dimensions: 260/200/H200 mm -Weight: 4.8 kg/piece

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DKNS 502/2 with bracket -Power: 0.15 kW 11160 rpm -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg