We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usado
El centro de torneado CNC NAKAMURA-TOME SUPER NTM3 se fabricó en 2004 en Japón. Distinguida por sus amplias capacidades de mecanizado y su amplio equipamiento, la máquina permite procesos de producción totalmente automatizados, manteniendo al mismo tiempo una alta precisión y unos costes operativos reducidos. Además, la construcción de alta calidad amortigua eficazmente las vibraciones y garantiza la máxima estabilidad del proceso, lo que se traduce en excelentes resultados de torneado. Las piezas de trabajo se mecanizan en hasta 11 ejes utilizando herramientas fiables almacenadas en tres cabezales de 24 posiciones. El torno CNC NAKAMURA SUPER NTM3 se ofrece con una amplia gama de equipos que incluyen un alimentador de barras BREUNING IRCO SiMag, un controlador CNC FANUC 16i-TB y portaherramientas adicionales. El torno CNC de doble husillo pesa 12000 kg. Especificaciones t ...
usado
Nakamura Tome WT-300 Centro de torneado y fresado CNC multieje Edad : 2007 FUNCIONES: FANUC 18I-TB CNC CONTROL TORRETAS GEMELAS DE 24 ESTACIONES CON FRESADO HUSILLOS GEMELOS OPUESTOS EJE C AMBOS HUSILLOS TORRETA SUPERIOR DEL EJE Y ALIMENTACIÓN DE BARRAS DE REVISTA LNS QL SERVO S3 CHIP BLASTER REFRIGERANTE DE ALTA PRESIÓN ESPECIFICACIÓN: MÁXIMO SWING 9.84inch DIÁMETRO MÁXIMO DE GIRO 10.62inch LONGITUD MÁXIMA DE GIRO 30.71inch DISTANCIA ENTRE HUSILLOS 43.3inch CAPACIDAD DE LA BARRA 2.5inch HUSO PRINCIPAL: VELOCIDADES DEL HUSILLO PRINCIPAL 45-4500RPM ROTACIÓN DEL EJE C 0.001 GRADOS DIÁMETRO DEL HUSILLO PRINCIPAL 3.15inch MOTOR DEL HUSILLO PRINCIPAL 25 HP NARIZ DEL HUSO PRINCIPAL A2-6 CONTRAHUSILLO: VELOCIDAD DEL HUSILLO SUB 4500RPM ROTACIÓN DEL EJE C 0.001 GRADOS RECORRIDO DEL EJE B 33.46 pulgadas DIÁMETRO DEL HUSILLO SUB 3.15 pulgadas MOTOR SUBHUSILLO ...
usado
X-travel: 700mm, y-travel: 250mm, z-travel: 1125mm, B-travel: 1100mm, number of axis: 6, controls: NT Smart X, connected load: 90kVA, length: 4460mm, width: 2670mm, height: 2615mm, weight: 17t, operational hours counter: 18,177h, an inspection is possible.
usado
This 11-axis Nakamura-Tome Super NTM3 was manufactured in 2007. It features dual spindles, three turrets, and a Fanuc 16i-TB control system. The main spindle has a 15 kW power with speeds up to 4500 rpm, and the counter-spindle offers 11 kW power with speeds up to 5000 rpm. The machine has a large working space with a maximum turning diameter of 190 mm and a bar diameter of 65 mm. Its a great opportunity to buy this Nakamura-Tome lathe. Contact us for further details.
usado
Description: NAKAMURA-TOME TW-10 CNC Doublespindel - Lathe The machine is equipped with: - Workpiece automation GR-203 and WS-231 - Controlled C-axis for main and counter spindle - 2 revolvers with powered tools - Counter spindle - Coolant device - chip conveyor - 8 tool holders (not driven) without tools - including documentation Attention: without chuck! The workpiece automation, C-axis and driven tools were not used by the donor. Therefore function cannot be guaranteed! Further technical data can be found in our machine video and the appendix as a PDF file.  , turning diameter: 210 mm, Drehlänge: 155 mm, turning diameter over slide: 205 mm, control: FANUC Series 18-T, number of places for driven tools: 2 x 12, spindle bore: 42 mm, turning speed range: 55 - 5500 rpm, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 5,300 x 2,500 x 2,350 mm
usado
spindle passage: H: 65 / G: 51 mm numbers of positions in the tool changer: 2x12 control: FANUC 18i-T tool taper: BMT55 collet chuck: Hainbuch (RD65) CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usado
This NAKAMURA TOME WT 250 Lathe machine was manufactured in the year 1999. It is equipped with a FANUC Series 18i-T Control Unit. Drilling and milling work possible over the entire circumference with one clamping. The tools and holders for driven tools are not included in the scope of delivery.
usado
This Nakamura-Tome WT-100 MMY Lathe was manufactured in the year 2018 and has 18000 production hours. It is equipped with a Nakamura-Tome control unit.
usado
This NAKAMURA-TOME TW-20 lathe was made in the year 2003 in Japan. It is equipped with a Nakamura Tome LUCK-BEI control unit and has 2 axis. The machine has 2 spindles and a max. turning diameter of 270 mm.
usado
swivelling range: 250 mm max. working diameter: 210 mm max. working lenght: 555 mm control: Fanuc 18i TB spindle taper: JIS A2-6 spindle diameter: 71 mm number of spindle speeds: 5.000 U/min CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with bar loader (Profimat) Equipment/accessories: - Bar loader - driven tool holders Further technical data: - Chuck size: Hainbuch collets - Distance between spindle end faces: 555 mm - Max. outside diameter for bar material: 65 mm - Spindle power 1 = 11 / 15 kW - Spindle power 2 = 7.5 / 11 kW - Max. torque: Nm 265 (kgf-m 27) The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usado
Diámetro de giro: 190 mmLongitud de giro: 800 mmPosiciones de la torreta: 24Posiciones ATC: 0 Eje controlado por número: 0 CNC Marca: FanucCNC Modelo: NT-IPS CNC MACH-id 5187 HACER Nakamura TIPO WT 150 - II YOP 2016 características técnicas Diámetro de giro máx . 190 mm Longitud de torneado DBC 800 mm Eje C 360.000 Velocidad del husillo principal 5000 rpm ATC / revólver 24 Velocidad herramientas en vivo 6000 Rpm Herramientas eléctricas en vivo 5,5 kW Control FANUC NT-IPS CNC Transportador de virutas Sí Ojo de& ...
usado
Diámetro de giro: 190 mmLongitud de giro: 970 mmPosiciones de la torreta: 12Posiciones ATC: 0 Eje controlado por número: 0 CNC Marca: FanucCNC Modelo: 18 iTB MACH-id 5186 MAKE Nakamura Japón TIPO Super NTJ YOP 2011 características técnicas Diámetro de giro máx . 190 mm Longitud de torneado DBC 970 mm Eje C 360.000 Diámetro del husillo 65 mm Velocidad del husillo principal 4500 rpm ATC / revólver 12 Velocidad herramientas en vivo 4500 Rpm Herramientas eléctricas en vivo 15 kW Control Fanuc 18i TB Transportador de virutas  ...
usado
número de serie: 31302 control: Fanuc con husillo doble: diámetro de giro: máx. 600 mm x-recorrido: 1000 mm con cargador: accesorios extensivos: aprox. 100 Aufnahmen, auch angetrieben peso de la máquina ca.: 13 t
usado
Diámetro de giro: 0 mm Larra de giro: 0 mm Posiciones de la torreta: 0 Posiciones ATC: 0 Eje controlado por número: 0 Marca CNC: 0 CNC Modelo: 0 Control: FANUC Tamaños de funcionamiento: 2330 Datos técnicos Número de husillos: 2 Número de revólveres: 2 Nariz del husillo de distancia: 250 - 870 mm Larra máxima de torneado: 160 mm Máx. diámetro de giro: 130 mm Carros de giro: Carriage 1: Recorrido longitudinal (eje Z): 200 mm Perlace longitudinal (eje X): 180 mm Relace transversal (eje Y): +/-30 mm Carriado 2: Recorrerje longitudinal (eje X): 180 mm Vueldo transversal (eje z): 620 mm Eje Y: +/-30 mm Número de posiciones torreta 1: 12 Número de posiciones torreta 2: 12 Torrilla de herramientas accionadas 1: 6 Carrecorre de herramientas motoras 2: 6 Velocidades de huso: 3600 rpm Potencia de las herramientas accionadas: 3.7 / 2.2 kW Husillo principal: Filámetro interno del hus ...