cutting diameter: 320 mm saw band length: 3660 mm dimensions of saw-band: 3660 x 27 x 0.9 mm capacity 90 degrees: round: 320 mm capacity 90 degrees: flat: 350 x 250 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 250 x 180 mm height of material-table: ca. 750 mm engine output: 2.0 kW weight: 750 kg range L-W-H: 1950 x 1100 x 1450 mm Machine in good condition () The compact design, exceptionally large working area, and easy handling make this model a versatile workshop machine. High-precision saw blade guides, vibration-damping cast components, and thusabsolutely smooth operation are also part of the quality standard of this machine. Features: - Robust electro-hydraulic band saw - Miter cuts up to 60 degrees (one-sided) possible - Hydraulic unit for automatic saw blade raising - Continuously adjustable saw blade lowering - Continuously adjustable saw blade speed - Robust ...
gardło: 350 mmskok: ok. 400 mmśrednica ramy: 95 mmPojemność prasowania: 25 tGłębokość stołu: 450 mmSzerokość stołu: 1.500 mmWysokość stołu: 900 mmWaga maszyny ok.: 2,5 tWymiary maszyny ok.: 2,0 x 2,0 x 2,3 mPrasa prostująca - pojedyncza kolumnaMÜLLER - CR 25.2.1- Godziny włączenia: 543h- wraz z lampą robocząDane do tej reklamy zostały utworzone za pomocą ModulMWS - rozwiązania programowego firmy LogoTech oHG.
CONTROLS electronic controls SIEMENS S7 300 PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 table cushion: no quick die change system: yes PRESS FORCES total force (nominal): 250 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1100 mm height above floor level: 1105 mm opening in bed (left-right): 1700 mm opening in bed (front-back): 305 mm SLIDE table surface (left-right): 2080 mm table surface (front-back): 1000 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 20 mm stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS & ...
Mobilny zbiornik o pojemności 150 l z pasywną podwójną klapą. Ze stali M4V.
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg
NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg
Oferta 25450 Specyfikacje: - Siła ściskająca 100 t - Projekcja 300 mm - Rozmiar stołu ok. 650 x 450 mm - Stół regulowany wysokością - biegunkowa w tabeli, ok. 200 x 100 mm - Duża wysokość montażu: ok. 450 mm - Powierzchnia tłoka 70 x 140 mm - Otwór na kołek w taranie 40 x 80 mm - Regulacja tappetu 60 mm - Regulacja skoku skoku 10 - 100 mm - Skok skoku: 80 obr./min - Sprzęgło wspomagane pneumatycznie - Napęd 380 V / 5,5 kW - Wymaganie miejsca przybliżone. W 1350 x H 2550 x D 1600 mm - Waga przybliżona. 5000 kg
używany
Siła nacisku: 1250 KN, Częstotliwość skoków: 55 min-1, Regulacja tłoka: 75 mm Skok: 20-120 mm, Moc silnika: 11 kW, Napięcie: 380 V Masa maszyny: 8,6 t Zasięg: 340 mm, Powierzchnia mocowania popychacza: 620 x 300 mm, Powierzchnia mocowania stołu: 650 x 1000 mm, Sprzęgło hydrauliczne Ortlinghaus z podwójnym hamulcem, Oburęczne urządzenie sterujące Rozbiórka przy tłuczku została profesjonalnie naprawiona.
- Udźwig: 22 t - Zasięg: 175 mm - Skok: 120 1/min - Regulacja tłoka: 50 mm - Regulacja wysokości stołu 50 mm - Regulacja skoku: 8-80 mm - Stół: 520 x 400 mm - Trzpień: 250 x 160 mm - Śruba rzymska z zaciskiem czopowym, D35 mm - Moc silnika 1,5 kW - Bardzo płynna praca - Mechaniczne odłączanie sprzęgła klinowego obrotowego za pomocą pneumatyczny siłownik pneumatyczny - Pneumatyczny przełącznik nożny - Brak promieniowania UVV - 4 sztuki nóżek maszyny - Przewód połączeniowy CEE wtyczka 16 A - Przyłącze powietrza z szybkozłączem - Waga: ok. 2 000 kg - Wymiary: szerokość 820 x głębokość 1100 x wysokość 1800 mm
pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 t throat: 280 mm stroke: 10 - 90 mm ram adjustment: 60 mm no. of strokes: 110 Hub/min table surface area: 740 x 550 mm clamping plate: 740 x 555 mm ram surface: 380 x 200 mm daylight, max. stroke above - ram adjustment above: 360 mm total power requirement: 4 kW weight of the machine ca.: 3,850 t dimensions of the machine ca.: B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - current press inspection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 320 mm stroke: 110 mm table surface area: 850 x 550 mm dayligth: 385 mm oil volume: ca. 500 l ram surface: 560 x 450 mm total power requirement: 30 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,5 x 2,0 x 3,0 m - Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and trunnion clamping piece - Conversion of hydraulics to proportional valve - Conversion of switch cabinet - Electrical travel measurement, Siemens Soft-Start, touch panel The following work was carried out in-house: - Machine was technically inspected - Machine was repainted - Before delivery, a current UVV test with braking time measurement is carried out Machine is safe for manual insertion work on the open mold The data for this ad was created with ModulMWS - the software solution of LogoT ...
pressure: 62 t distance between columns: . mm stroke: 360 mm Table area: 2500x580 mm dayligth: 400 mm diameter - coniflex cutter: Zilinderdurchmesser 200 mm 0: 200 bar Stud passage: 590 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Video: https://www.youtube.com/watch?v=gkuLoo7ABkc The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 m total power requirement: 300 kW weight of the machine ca.: 280 t dimensions of the machine ca.: 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the sell ...
pressure: 800 t distance between columns: 3550 mm stroke: 1100 mm distance table/ram, max. stroke up, adjustment up: 1900 mm table surface area: 3500 x 1800 mm die-cushion pressure inside the table: 350 t stroke of drawing cushion in table: 295 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in pusher: 160 mm ram surface: 3500 x 1800 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kW weight of the machine ca.: 265 t dimensions of the machine ca.: m overhauled in 1998 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Manufacturer: Müller, hydraulic single-column press type HEP15 -Pressing force: 15 tons -Clamping table: 900 x 500 mm -Projection: 265 mm -Max. Stroke: 430 mm -Operation: foot pedal -Motor: Siemens 4.0 kW -Dimensions: 1450/900/H2300 mm -Weight: 1646 kg
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Heinz Sanders GmbH
