Модель
(Производитель: KRONES)
Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data Manufacturer: K ...
Overview Krones Ergomodul modular container labeller, built in 2020. The carrousel table carries 30 rotary plates on a 1,200 mm pitch diameter at a machine pitch of 125.6 mm; containers run anticlockwise after the infeed, in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, take any of the four interchangeable labelling stations that belong to the machine: two ERGOMATIC-CL cold-glue stations and two AUTOCOL-TS self-adhesive stations. Stations are exchanged without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and of every station is motorised with container type preselection. Technical data Manufacturer: Krones Model: Ergomodul Year of manufacture: 2020 Container table pitch diameter: 1,200 mm Rotary plates: 30 ...
Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer for glass bottles, built in 2023. It takes the full pallet, lifts each container layer off the stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in the Krones enviro design for reduced energy and media consumption. Lifting unit, sweep-off station, layer centring and the 15-lane discharge table all run on SEW servo drives, layer scanning is pneumatic, and the packing material handler works with a suction gripper frame and a vacuum ejector. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor; the throughput display is set to 14,000 containers per hour. The machine handles several container formats on flat pallets of 1,200 x 1,000 mm. Technical dat ...
Manufacturer: Krones Model: Solidpac Year of manufacture: 2006 Machine type: Packaging machine (wrap-around case/carton packer) Condition: Currently not in operation Product used with machine: Single-use glass bottles 0.33 L, diameter 61.5 mm, height 217 mm, packed in wrap-around cardboard, pack arrangement 2x3 Reference product specification per manufacturer data sheet: Glass bottle diameter 78 mm,height 276 mm, 710 ml Pack arrangement per manufacturer data sheet: 2x3 Technical Specifications: - Dimensions without conveyor: Length 10,900 mm - Width 1,500 mm (with doors closed) - Width 3,500 mm (with doors open) - Height 2,400 mm (with control cabinet) - Walking height 1,200 mm from the floor - Maximum speed: 150 packs per minute - Power supply: 400 V three-phase plus neutral, 50 Hz, 8 kVA - Air supply: 5 bar - Noise level: less than 75 dBa at 1 meter distance - Electrical conne ...
Rotary labeling machine for applying paper labels to glass bottles using cold glue. Equipped to label front labels (in 4 formats), neck labels (in 2 formats), and back labels (1 format)., Additional title: cold glue labelling for glass bottles; years of manufacture: 1996 – 2023, Capacity: 55000 bo/h, Formats: 0.5 l NRW bottles, Material: housing from stainless steel, Position: in a floor-standing cabinet on legs, Base construction: carousel-type machine, Features: Protective enclosures with doors; label magazines; glue pumps; dating (vector laser) with its own control console featuring a touchscreen and monitoring via image recording; control cabinet with touchscreens , Periphery: air blow-off; Syscona fill level control; label inspection; cap inspection with ejector; bottle shape inspection
Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: As Is Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com
Used Used Krones blower: Year: 2004 Condition: As Is Model: Contiform S18 Year: 2004 Speed: 24.000 bph for 2,0 L - 28.000 bph for 1,5 L Rotative 18 cavities 1 set of molds included Automatic chiller Automatic preform feeder Automatic preform crate tipper Bottle ejector installed in the pneumatic conveyor Electrical control panel in Polish, English, and German Safety protection Code: W 117 More details: https://bottlingscout.com
Used Used Filling Monoblock Krones 70.50.10.10.12: Year: 1999 Condition: As Is Used Filling Monoblock Krones 70.50.10.10.12: Model: VP-G05 Year: 1999 Speed: 12.000 BPH Direction: Clockwise Workable container type: PET bottles, glass bottles RINSER 70 clamps Electric carousel height adjustment Fixed nozzle Double treatment FILLER 50 filling valves Electric tank height adjustment Type of filling: gravity Type of valve: mechanical CAPPER 10 heads Type of workable cap: pre-threaded plastic cap Electric head height adjustment Pick & Place Distribution System Type of workable cap: plastic pressure cap LABELLER 12 heads 2 stations Type of station labeling: cold glue Number of applicable labels: 3 Applicable label types: ? Front ? Back ? Collar Safety protections Code: QT 736 More details: https://bottlingscout.com
Used Used Filling Monoblock Krones Soft Drinks 30.000 bph: Year: 1997 Condition: As Is Used Filling Monoblock Krones Soft Drinks 30.000 bph: Model: 066-103/KK 11-m Year: 1997 Speed: 30.000 bph (0.5l) Direction of rotation: clockwise Type of bottle: glass bottle Filler 66 valves ? Type of filling: isobaric ? Valve: mechanical ? Functions: double pre-evacuation ? Filler control system (Siemens S5) 2009 Capper 11 heads ? Type of workable caps: crown ? Size of caps: 0.21mm ? Caps distribution system: drop-feed ? Vacuum system before capping Safety protections Machine dimensions: 3,7 m x 4,5 m on surface. Code: QT 748 More details: https://bottlingscout.com
Used Used Krones labeller Roll-Fed 12.000 bph: Year: 1995 Condition: As Is Used Krones labeller Roll-Fed 12.000 bph: Model: Contiroll Year: 1995 about Speed: 12.000 BPH Direction: Clockwise 15 heads Mechanical cam plate 1 station Type of station labeling: roll fed Safety protections Code: EA 665 More details: https://bottlingscout.com
Used Used labeller Krones Contiroll HS 36.000 bph: Year: 2014 Condition: As Is EA 640 | LABELLER KRONES CONTIROLL HS 36.000 BPH Year: 2014 Speed: 36.000 bph Direction: Clockwise Model: Contiroll HS Nr.1 roll-fed stations PLC Siemens S7 Safety protections Code: EA 640 More details: https://bottlingscout.com
Used Used labeller Krones Bonamatic adhesive: Year: 1999 Condition: As Is EA 622 | LABELLER KRONES BONAMATIC ADHESIVE Year: 1999 Speed: 7.000 BPH Direction: Counterclockwise 8 heads Electronic cams Nr.2 Cold glue stations Nr.3 Adhesive stations Ironing for cylindrical bottles on the belt Complete with many bottle sizes Safety protections Code: EA 622 More details: https://bottlingscout.com
Used Used labeller Krones 6.000 bph: Year: 1988 Condition: As Is Used labeller KRONES Year: 1988 Speed: 6.000 Bph Direction: Clockwise Number of heads 8 Number of stations: 2 cold glue stations Type of apply Front Back Mechanical cam Bottle formats: Minimum ? 50 mm, maximum ? 125 mm Minimum bottle height 150 mm, maximum 350 mm label length: 30 mm maximum 140 mm Safety protections Code: EA 566 More details: https://bottlingscout.com
Used Used labeller Krones contiroll roll-fed: Year: 2003 Condition: As Is EA 596 | Labeller Krones Contiroll Roll Fed Year: 2003 Speed: 16.000 bph Direction: Counterclockwise 10 heads Nr.1 Roll Fed station Formats: 300 ml | 600 ml MACHINE RECONDITIONED ON 2020 Safety protections Code: EA 596 More details: https://bottlingscout.com
Used Used labeller Krones Starmatic 960/16: Year: 2010 Condition: As Is Used labeller KRONES STARMATIC 960/16 year: 2010. Speed: 18.500 BPH. Direction: Clockwise. Optical centering with camera 2 cold glue stations. station n2 releasable by friction. Plates rotations with brushless motors. 5 formats available. Safety protections. Code: EA 91 More details: https://bottlingscout.com
Used Used labeller Krones Canmatic 960-20 PET: Year: 1995 Condition: As Is Used KRONES labelling machine CANMATIC 960-20 Year: 1995 ? Reconditioned in 2015 Suitable for pre-cut wraparound paper label Speed: 30.000 bph System to put glue on the bottle ? NORDSON model PB7 , 2 MOD EP34S System to put glue on the label ? NORDSON model PB7 , 3 MOD SOLIDBLU- S PLC SIEMENS S7 , Inverter Danfoss , HMI touch screen SIEMENS Bottles equipments : 0,5 Lt prestige 0,5 Lt classic 1,0 Lt ? diameter 1,5 Lt ? diameter Code: EA 50 More details: https://bottlingscout.com
Used Used Labeller Krones Bonmatic 8.000 bph: Year: 2026 Condition: As Is Model: BONAMATIC Year: 2006 Speed: 8.000 bph Rotary Direction of rotation: Clockwise ? from left to right 12 plates 1 adhesive stations 2 cold glue stations Types of applicable labels: ? Front label ? Back label ? Neck/shoulder label ? Tax stamp I adhesive station Plate movement system: Electronic cam Centering systems: ELECTRONIC with photocells GENERAL DATA Safety protections Machine layout Code: EA 675 More details: https://bottlingscout.com
Used Used Krones labeller: Year: 2002 Condition: As Is Model: Canmatic Combi Year: 2002 Speed: 18.000 bph Rotative, direction clockwise Electric height adjustment 16 plates Mechanical cam plate movement 1 hot-melt glue station for wrap-around labels Fixed unit Nordson hot-melt glue system Safety protections Code: EA 681 More details: https://bottlingscout.com
Used Used Krones Filling triblock 48.80.12.12.12: Year: 2014 Condition: As Is Model: MODULFILL HES (VP VI) 3600-80-141 Year: 2014 Speed: 12,500 bottles/hour for Moscato wine ? 10,500 bottles/hour for sparkling wine ? 18,000 bottles/hour for still wine Processable bottle formats: from 20 cl to 150 cl Direction of rotation: clockwise Height adjustment: electric Bottle rinser with 48 grippers, mobile nozzle 2 air and water treatments Isobaric filler with 80 electropneumatic valves Valve functions: pre-evacuation, degassing 3 cappers: - Arol capper with 12 heads for flush and mushroom corks Heated jaws Vacuum system before capping - 12-head capper for aluminum screw caps Cap size: Stelvin ? 30x60 Distribution system: pick-off - 12-head capper for pull-off caps Complete with: -KRONES Checkmat level and cap inspection system -Orienter/elevator for flush and mushroom corks -Cap elevator for alu ...
Used Used Krones labeller: Year: 2000 Condition: As Is Year: 2000 Speed: 18.000 bph American rotation 16 plates 2 cold glue station with mechanical cams Types of applicable labels: ? Front label ? Back label ? Neck/shoulder label Type of bottle: glass bottle Safety protections Code: EA 684 More details: https://bottlingscout.com
Used Used Krones labeller: Year: 2007 Condition: As Is Model: UNIVERSELLA Year: 2007 Speed: 5.000 bph Rotative clockwise 10 plates with mechanical cam 2 station hot melt for front and back label Safety protection Code: EA 688 More details: https://bottlingscout.com
Used Used krones 2 cold glue station labeller: Year: 1992 Condition: As Is Model: Prontomatic 720-12-480-6-4-180 Year: 1992 Speed: 10.000 bph 1l Direction of rotation: Clockwise Number of plates 12 Number of glue stations: 2 Labeling type: ? Cold glue Types of applicable labels: ? Front label ? Back label ? Neck Plate movement system: Mechanical cams Type of bottle: glass bottle Safety protections Code: EA 694 More details: https://bottlingscout.com
Used Used labelling machine KRONES 16 heads - Year 2003: Year: 2003 Condition: As Is YEAR: 2003 COUNTERCLOCKWISE DIRECTION SPEED: 15.000 BPH ELECTRONIC CAM WITH 16 PLATES 1 MODULAR ADHESIVE STATION TO APPLY ONE LABEL 1 MODULAR GLUE STATION TO APPLY BACK LABEL SUITABLE FOR 3? MODULAR STATION (GLUE OR ADHESIVE) ELECTRIC ADJUSTMENT HEIGHT PLC AND INVERTERS TO REGULATE MACHINE TURNABLE PANEL WITH TOUCH SCREEN BLOCK ENTRY SYSTEM SAFETY PROTECTIONS Code: EA 5 More details: https://bottlingscout.com
Used Used monoblock Krones Combi (blower, filler and capper): Year: 2004 Condition: As Is Year: 2004 Speed: 12,800 bph with 1.5 L bottles Product: PET bottles for still and sparkling water Type: rotary Direction of travel: counterclockwise Workable formats: 500 ml, 1000 ml, 1500 ml CONTIFORM blower with 8 cavities Molds included Isobaric filler with 50 MECAFILL electropneumatic valves Valve functions: degassing Capper for Alaska plastic pre-threaded cap Distribution system: pick & place Safety protection Complete with: CIP - year 2004 Fluid Engineering saturator - year 2004 Code: QT 805 More details: https://bottlingscout.com
Used Used Krones 18T 1S Roll Feed Labeller: Year: 2020 Condition: As Is Model: Contiroll - Checkmat Year: 2020 Speed: 30.000 bph 0.5 lt format Type: Rotary labelling machine Direction: Counter-clockwise Plates: 18 carousel plates with belt drive 1 roll-feed station for wrap-around OPP labels Inspection: Carousel label inspection via Krones Checkmat Safety protection Code: EA 708 More details: https://bottlingscout.com
Доступна ротационная машина для маркировки Krones с грифной лентой. Метод маркировки: холодный клей, контейнеры: винные бутылки/игристые бутылки, максимальная ёмкость маркировки: 7000 бутылок/ч, размеры машины X/Y/Z: примерно 1650 мм/1250 мм/1700 мм, вес: примерно 2000 кг. Доступна документация. Осмотр на месте возможен.
Доступна полная линия очистки и наполнения бутылок Krones. Пропускная способность: 8000 бутылок в час, шаг карусели: 161 мм, диаметр карусели: 1800 мм, клапаны заправки: 50. Это полноценный моноблок для полоскания и наполнителя для стеклянных и пластиковых бутылок. Доступна документация. Осмотр на месте возможен.
Доступен полностью автоматический слоевой депаллетизатор Krones. Формат паллеты X/Y: 1200 мм/1100 мм, максимальная высота поддона: 2110 мм, ход паллет: продольный, максимальная емкость депаллетизации: 8000 контейнеров/ч, форматы объёма контейнера: 200 мл/375 мл/750 мл/1000 мл, диапазон диаметров контейнера: 55,5 мм-89,5 мм, диапазон высот контейнера: 205,5 мм-310 мм, высота для транспортировки контейнера: 3290 мм, высота транспортировки паллетов: 550 мм. Размеры машины X/Y/Z: примерно 6300 мм/2200 мм/3350 мм, вес: примерно 3800 кг. До ...
Used KRONES starmatic 80-D65 labeling machineTechnical Specifications & Performance DataThis automatic rotary carousel bottle labeling machine is engineered for high-speed industrial packaging and beverage production environments. Designed for wrap-around label application on glass bottles, it combines precise bottle handling with robust mechanics suitable for continuous duty in a used bottling line or standalone operation. The rotary platform ensures stable container control at elevated speeds, ideal for second hand industrial packaging upgrades or expansions.Machine type: Automatic rotary carousel bottle labeling machineModel designation: 80-D65Production performance: 4.000 - 8.000 BPHContainer types: Glass bottles, cylindrical formatsBottle formats: 0.355L Vichy, 0.5L Euro, 0.5L NRWBottle infeed/outfeed: Star-wheel infeed and outfeed systemLabel smoothing: Brush-type label-smoothing s ...
Manufacturer: Krones Model: Linatronic M, K735E02 Type of machine:empty bottle inspector Year of manufacture: 2015 Rated voltage: 400 / 230 V Current type and system: AC 3/N/PE Mains frequency: 50 Hz Full load current Ib max: 6 A Short-circuit strength: Icw 0.46 kA/1s Mains disconnecting device: Icw 0.46 kA/1s Backup fuse: 20 A Find more here - .ucymachines/ Contact us at - sales@ucymachines
