We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usava
Description Working hours: 71.000
usava
Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.
usava
Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power.
usava
Operational hours counter: 59,129h, with Handling PSA 2080.
usava
Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.
usava
Working surface: 2800x1600mm, swing angle: 90°, parallel stroke: 150mm, clamping force: 700kN, connected load: 50kW, including documentation.
usava
Description Working hours: 73.000h New pump.
usava
Description with hoist it changes molds
usava
Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible.
usava
Description Working hours: 47.000
usava
General SKU393U1104 LocationBarneveld MakeKrauss Maffei TypePZU 125 No.8740 Year of construction1975 Main Features MaterialStainless steel/Halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity316 Ltr. Basket sizesDia 1250x500 mm Wall thickness12 mm Max. loading weight383 kg With bottom dischargecheck Liquid outletDia. 150 mm With hydraulic unitcheck Motor22kw, 400Volt, 1465 rpm Max. basket speed950 rpm MaterialHalar coating, Stainless steel 2.4610 (Hastelloy C-22) Information Total height1.5 m Weight800 kg Floorspace2.5x1,5 m Extra SpecificationsContact parts in Hastelloy 2.4610 and basket Halar coatedNew arrivalsBasket centrifugesKrauss MaffeiNew arrivalsCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a r ...
usava
General SKU358U928 LocationBarneveld MakeKrauss Maffei TypeHZ 1000 Ph No.60000261 Year of construction2001 Main Features MaterialStainless steel Motor37 KW Inlet diameter200 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity170,4 l (Max 171,8 l) Basket sizesDia. 1000 x500 mm Wall thickness20 mm Max. loading weight213 kg Motor37 kW, 400 volt, (Ex) Max. basket speed1480 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor1,5 kW Inletcheck Solids outletDN200 Liquid outletcheck MaterialStainless steel 1.4404 (316L) Information Total height2,13 m Weight9100 kg CEcheck Floorspace3,2 x 1,8 mNew arrivalsPeeling centrifugesKrauss MaffeiNew arrivalsCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ...
usava
Closing unit Clamping force [kN] 2300 Dimensions of mounting plates (hxv) [mm] 880x830 Clearance between columns (hxv) [mm] 610x560 Min./max. mold height [mm] 250/680 Maximum opening width [mm] 1230 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 570 Injection weight [g] 519 Injection pressure [bar] 2387 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30.6 Heater power [kW] 22.7 Dimensions and weight Net weight with control cabinet [t] 13.5 Dimensions (length x width x height) [m] 7.01 x 2.12 x 2.09
usava
Closing unit Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 X 1530 Clearance between columns (hxv) [mm] 1120 X 1000 Min./max. mold height [mm] min 600 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2863 Injection weight [g] 2605 Injection pressure [bar] 1742
usava
Clamping force [kN] 9500 Dimensions of mounting plates (hxv) [mm] 1960x1710 Clearance between columns (hxv) [mm] 1400x1150 Min./max. mold height [mm] 500/1200 Maximum opening width [mm] 2400 Injection unit Screw diameter [mm] 120 Injection volume [cm3] 7634 Injection weight [g] 5420 Injection pressure [bar] 2257 Electrical and hydraulic equipment Rated power of the pump motor [kW] 160 Heater power [kW] 86 Dimensions and weight Net weight with control cabinet [t] 80 Dimensions (length x width x height) [m] 12.77 x 3.42 x 2.75m
usava
Closing unit Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1000x950 Clearance between columns (hxv) [mm] 735x685 Min./max. mold height [mm] 250 - 600 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 383 Injection pressure [bar] 2304 Electrical and hydraulic equipment Rated power of the pump motor [kW] 36.1 Heater power [kW] 29.2
usava
Closing unit Clamping force [kN] 9500 Dimensions of mounting plates (hxv) [mm] 1960x1710 Clearance between columns (hxv) [mm] 1400x1150 Min./max. mold height [mm] 500-1200 Maximum opening width [mm] 2400 Injection unit Screw diameter [mm] 120 Injection volume [cm3] 7634 Injection weight [g] 5420 Injection pressure [bar] 2257 Electrical and hydraulic equipment Rated power of the pump motor [kW] 160 Heater power [kW] 86 Dimensions and weight Net weight with control cabinet [t] 61.5 Dimensions (length x width x height) [m] 12.77 x 3.42 x 2.75
usava
Description: Injection unit: Screw diameter: 50 mm Shot weight: 343 G Stroke volume: 377 CCM cm³ Injection pressure: 1892 bar Plastification rate: 35 G/S Screw speed: 255 1/min Closing unit: Closing force: 1500 KN max. opening daylight: 1000 mm Bar spacing: 500 X 500 mm min. molding height: 400 mm Tool mounting platens: 780 X 790 mm Approx. Onsite Dimension. (l x w x h): 4,600 x 1,700 x 2,200 mm, weight approx.: 6,500 kg
usava
Description: Serial number 504171 Clamping force 500 Ton Opening stroke mm: 1260 Distance between tie bars mm: 900 x 800 Installation height min/max mm: 90 Mould fixing platen size 1270 x 1200 Screw size mm: 80 Injection shot weight in Polysterol gr: 1304 Injection volume cm³: 1433 Injection pressure increased bar: 1829 Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA Dimension 7400 x 2330 x 2500 mm Weight 17000 kg Approx. Onsite Dimension. (l x w x h): 7,400 x 2,330 x 2,500 mm, weight approx.: 17,000 kg
usava
Description: Serial number 174470 Clamping force: 2000 kN Screw diameter 45 mm Ls/D ratio: 22 Injection pressure: 2336 bar Stroke volume: 305 ccm Shot weight, PS 278 g Injection rate: 200 ccm/s Screw speed: 342 1/min Plasticising rate max.: 37 g/s Nozzle pressure: 110 kN Mould opening force, max.: 101 kN Travel force movable platen Opening: 50 kN Travel force movable platen Closing: 42 kN Size of mould platens 915 mm x 915 mm Distance between tie bars 560 mm x 560 mm Mould opening stroke: 700 mm Mould height min.: 350 mm Max daylight: 1050 mm Hydraulic ejector - stroke: 200 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Approx. Onsite Dimension. (l x w x h): 5,690 x 1,900 x 2,400 mm, weight approx.: 2,534 kg
usava
Description: Serial number 254335 Clamping force 300 T Screw diameter 50 mm Tie bar spacing (H) 630 mm Tie bar spacing (V) 630 mm Shot volume 432 cm³ Shot weight 393 g Pressure on material 2304 bar Platen length 995 mm Platen width 1050 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA dimension 45970 x 2040 x 2360 mm Weight 12.500 kg Approx. Onsite Dimension. (l x w x h): 45,970 x 2,040 x 2,360 mm, weight approx.: 12,500 kg
usava
Description: serial numbe 253455 Clamping force 2500 kN Screw diameter 60 mm Mould opening force, max.: 160 kN Travel force movable platen Opening: 67 kN Travel force movable platen Closing: 62 kN Size of mould platens 900 mm x 830 mm Distance between tie bars 630 mm x 560 mm Mould opening stroke: 820 mm Mould height min.: 330 mm Max daylight: 1150 mm Injection pressure: 1778 bar Stroke volume: 678 ccm Shot weight, PS 610 g Injection rate: 565 ccm/s Screw speed: 259 1/min Plasticising rate max.: 58 g/s Nozzle pressure: 110 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 45 kW Installed heating capacity: 22,7 kW Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA Dimension 8280 x 2235 x 2350 mm Weight 12600 kg Approx. Onsite Dimension. (l x w x h) ...
usava
Description: serial number 154951 Clamping force 1500 kN Mould opening force, max.: 86 kN Travel force movable platen Opening: 45 kN Travel force movable platen Closing: 34 kN Size of mould platens 840 mm x 790 mm Distance between tie bars 560 mm x 500 mm Mould opening stroke: 600 mm Mould height min.: 300 mm Max daylight: 900 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 20/11 kN Screw diameter: 50 mm Ls/D ratio: 20 Injection pressure: 1892 bar Stroke volume: 377 ccm Shot weight, PS: 343 g Injection rate: 181 ccm/s Screw speed: 255 1/min Plasticising rate max.: 35 g/s Nozzle pressure: 84 kN Nominal capacity of pump motor: 22 kW Installed heating capacity: 16 kW Adjustable barrel heating zones: 5 Dry cycle number: 1700 1/h Reservoir capacity: 345 ltr. Rated voltage 400 V, 50 Hz Rated current 80 A Control voltage 24 VDC Dimension 4670 x ...
usava
Máquina de moldagem por injeção J4, fabricante: KRAUSS MAFFEI, tipo: KM 80-160 C2, ano de fabricação: 2000, número de série: 641209, horas automáticas especificadas: 29.389, horas de funcionamento especificadas: 37.521, peso da máquina: 3.200 kg, força de fixação hidráulica: 800 KN, espaçamento máximo da placa: 750 mm, altura do molde: min. 250 mm, força de ejeção: 22 KN, distância de ejeção: 150 mm, comprimento do ejetor: 250 mm, número de trações hidráulicas do núcleo: 2, energia elétrica aquecimento/motor: 13/18.5 kW, volume de pulverização: 36 cm³, especificação. Pressão de pulverização: 1.600 bar, broca: 22 mm, bico de raio: 15, com manuseio SEPRO 5X-15, ano de fabricação: 2020, número de série: R 010 631-01 / Sucess 5, nº R014532-01, incluindo cerca de barreira
usava
Máquina de moldagem por injeção J5, fabricante: KRAUSS MAFFEI, tipo: KM 80-160 C2, ano de fabricação: 2000, número de série: 641 276, horas automáticas especificadas: 35.441, horas de funcionamento especificadas: 47.426, peso da máquina: 3.200 kg, força hidráulica de fixação: 800 KN, espaçamento máximo da placa: 750 mm, altura do molde: min. 250 mm, força de ejeção: 22 KN, distância de ejeção: 150 mm, comprimento do ejetor: 250 mm, número de trações do núcleo hidráulico: 2, aquecimento/motor de energia elétrica: 13/18.5 kW, Volume de pulverização: 25,4 cm³, especificação. Pressão de injeção: 2.400 bar, broca: 18 mm, bico de raio: 15, com manipulação SEPRO 5X-25, ano de fabricação: 2016, número de série: R 002 126-01, robô SEPRO 6X-90L, ano de fabricação: 2017, número de série. R002301-01, incluindo vedação de barreira
usava
Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg
usava
Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1704x1700 Clearance between columns (hxv) [mm] 930x930 Min./max. mold height [mm] min 600 Maximum opening width [mm] 1750 Injection unit Screw diameter [mm] 130 Injection volume [cm3] 6172 Injection weight [g] 5617 Injection pressure [bar] 1296 Electrical and hydraulic equipment Rated power of the pump motor [kW] 132 Heater power [kW] 70
usava
Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1600x1530 Clearance between columns (hxv) [mm] 1120x1100 Min./max. mold height [mm] min 1100 Injection unit Screw diameter [mm] 135 Injection volume [cm3] 8588 Injection weight [g] 7807
usava
Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 600 x 600 Clearance between columns (hxv) [mm] 370x370 Min./max. mold height [mm] min 200 Maximum opening width [mm] 600 Injection unit Screw diameter [mm] thirty Injection volume [cm3] 85 Injection weight [g] 77 Injection pressure [bar] 2025 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11 Heater power [kW] 8 Dimensions and weight Net weight with control cabinet [t] 2.65 Dimensions (length x width x height) [m] 3.53 x 1.42 x 1.96
usava
Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1270x1230 Clearance between columns (hxv) [mm] 800x800 Min./max. mold height [mm] min 380 Maximum opening width [mm] 1400 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 792 Injection weight [g] 720 Injection pressure [bar] 2420 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 29