117 € 감시 목록에 추가
Digital, Portable, LCD Display, Never Used Overall dimensions: 300 x 300 x 300 mm Weight: 3 kg Auction-ID: A7-45834-126
117 € 감시 목록에 추가
Digital, Portable, LCD Display, Never Used Overall dimensions: 300 x 300 x 300 mm Weight: 3 kg Auction-ID: A7-45834-218
95 € 감시 목록에 추가
Composed of 2 pcs: base size 30 x 45 mm Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-45834-308
95 € 감시 목록에 추가
Various measuring plates, Tripods and straightening plates in different designs, see photos for more details Auction-ID: A7-46619-358
100 € 감시 목록에 추가
\"Extensive lot of boundary gauges (GO gauges) in tolerance H7 from industrial production. Scope of delivery / scope: • approx. 50 pieces of boundary gauges H7 • diameter range approx. 6 mm to 56 mm (mixed) • mainly in labelled wooden boxes • partly with protective rings / support collars • heavy, robust industrial versionCondition: • used, well-maintained workshop stock • many gauges with test stickers Article: Limit gauges / GO gauges H7Number: approx. 50 piecesDiameter range (visible): approx. 6 mm to 56 mm (e.g. 6 / 8 / 10 / 12 / 13 / 15 / 17 / 18 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 35 / 54 / 56 mm)Design: • predominantly heavy industrial version • with protective rings / support collar • partly with hexagon • many with inspection stickersStorage: mainly wooden boxes, labeledManufacturer: mixedCondition: used, cared for\" Auction-ID: A7-46417-139
50 € 감시 목록에 추가
\"Calibration gauge for tip calipers 0–500 mmCalibration gauge for tip calipers in a wooden case.The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible):10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mmTotal length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipersMeasuring range: up to approx. 500 mmMaterial: steel, ground Referencepoints: several engraved test distancesDesign: with threaded holes\" Auction-ID: A7-46417-333
workpiece diameter: 5 - 1.000 mmmodule range: 0,2 - 25 helix angle: < 90 °Control: Wenzel GearTec faceplate diameter: 750 mmx-axis: 1.200 mmy-axis: 550 mmz-axis: 1.000 mmtotal power requirement: 6,5 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 3,30 x 3,15 x 2,70 mSoftware:BMain, FPDFPPostAction, GrafTool, TAlign,TAnalyse, TApplication, TCali, TCut_INPUT,TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL,THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot,TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL,TStat, TStylus, WMI, wingeco.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
z-travel: 200 mmClamping diameter of the cutter heads: max. 550 mmMax. permissible cutter head weight: 150 kgMounting plate diameter for cutter heads: 360 mmMounting cone for cutter heads Nominal diameter: 500 mmweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2 x 1,5 x 2,03 mCutter Head Set-Up- and -Measuring MachineIn the manufacturing process for spiral-toothed bevel gears, the quality ofthe gear cutting gear cutting tools used plays a decisive role.Particularly in dry milling, high gear cutting quality and a long servicelife can only be achieved with precisely adjusted cutterheads.The Oerlikon cutterhead setting and testing device CS 200 enables quick andeasy setting of the individual knives and simple adjustment of the individualknives, it checks the position and documents the measurement results. Themeasuring sequence on the CNC-controlled testing device is partially ...
x-travel: 1200 mmy-travel: 2415 mmz-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe machine was around 6 years complete overhauled and its control technologywas brought to the newest status.Technical details:Distance between portal columns: 1440mmX-travel (cross): 1200mmY-travel (longitudinal): 2415mmZ-travel (vertical): 1000mmFeeler head: Vast GoldRegularly maintenanced through company ZeissWith housingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring range: 16 mmAngle: 60 °weight: 500 grThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
전압: 110 - 230 V 주파수 범위: 50 - 60 Hz 전원 연결: 0.5 kVA 디멘션 (HxWxD): 1000 x 800 x 1750 mm 무게: 150 kg 바 나이프용 측정기. 장비/액세서리: - 측정 도구 - 클램핑 장치 - 컴퓨터 - 모니터 - 프린터 - 캐빈 - 기술 문서 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
측정 범위: 600 mm 측정 시스템 해상도 능력: 0.001 mm 무게: 30 kg 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
dimension of workpiece: 2400 mmvoltage: 26,8 V: total power requirement: 26,8 kWweight of the machine ca.: 0,040 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X-트래블: 600mmy-트래블: 600mmz-트래블: 250mm테이블 크기: 697 x 758mm기계 무게 ca.: 1.5 t기계 크기: 2 x 1.5 x 1.6m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
x-travel: 200 mmy-travel: 60 mmz-travel: 500 mmspeed of measurment: 0,02 - 20 mm/s0: X = 0,05 µm 0: Z = 1 µm mgtraversing speed: X = 0 - 80 mm/sbase plate: 600 x 450 mmweight of the machine ca.: 164 kgdimensions of the machine ca.: 766 x 482 x 1166 mmCE signed: Contracer contour measuring device, high-performance measuring system for automatic series measurement with motorized Z-column on granite plate. Straightness guidance of the X-axis via ceramic and automatic raising and lowering of the probe tip. Measuring range Z1 - axis = 60 mm. Table, screen and PC. The software can measure, evaluate and document.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
공작물의 치수: - mm전압: - V액세서리 및 장비:: ASUS All-in-One PC 총 전력 요구 사항: - 기계의 kWweight ca.: - 기계의 치수 ca.: - 이 광고의 mhttp://www.ibendorf.de/ecmc.htmlThe 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.
X-트래블: 665mmY-트래블: 465mmZ-트래블: 350mm기계 무게 ca.: 0,65 t기계 치수 ca: 1,11,12,2 m번호 02983D 측정기 DEA OMICRON A 001작업 영역: 665 x 465 x 350TROLL - 마이크로프로세서 시스템L x W x H 1100 x 1100 x 2200 mm무게 약. 620kg
measurement range: 300 - 400 mmdimension of workpiece: 300 - 400 mmcondition: gut Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: PELI 1400 : ja : ja : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 310310 mmworking area: X-Y Tisch 200200 mmdimensions: 1 1 2 mmweight: 500 kgNo. 41283 D - Surface and roughness measuring machineFRT, type MicroProf, year of construction 2007 withTable 310 x 310 mmAccessories:Optical sensor / video lensChromatic sensor CWL F 6 mmChromatic sensor CWL F 300 ymDouble holder for 2 sensorsRaised portal structureXY table 200 x 200HousingPC with monitor and keyboardDimensions (without swivel desk)approx. 1 x 1 x 3 mWeight approx. 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
금액: 1 STK기계식 제로 세터는 기계식 제로 세터의 표준 버전입니다. 높이가 50mm이며 밀링 머신 또는 선반에서 Z 방향의 공작물 표면 또는 공구 길이의 위치를 정확하게 결정하는 데 적합합니다.
x-travel: 600 mmy-travel: 800 mmz-travel: 600 mm0: 1,7 + L µTemperature range: 20 °Cweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1319 x 1940 x 2710 mGantry measuring machine on hard stone measuring plate with high accuracy, high-precision guides, wear-free precision air bearings, contactless scale system on all axes 0.1 µm, as well as with 3-axis CNC control, joystick,PH 10M rotary/swivel head, measuring probe scanning kit 2 + scanning module kit.Dell OptiPlex system computer with LED monitor, keyboard, laser printer and software for graphical representation of the shape deviation, assistant for generating travel paths, simulation model, Excel protocol output, statistics module. Flexible exchange system for storing the scan modules.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
