밀링 머신 사용 판매를 위해 (2,496)

x-트래블: 300-320 mmy-트래블: 240-270 mmz-트래블: 300-310 mm 테이블-크기: 670 x 320 mm 툴 어댑터: ISO 40 회전 속도: 45-2240 U/민퀼 스트로크: 60 mm 헤드 회전: 360 이송: 12.5 - 630 mm/유급 회전: 1200 mm/기계 최소 무게 약 1 Tdimension 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

X-이동: 300-320 mmy-이동: 240-270 mmz-이동: 300-310mm 테이블-크기: 670 x 320mm 도구 어댑터: ISO 40 회전 속도: 45-2240 U/minquill 스트로크: 60 mm 헤드 회전 속도: 360 이송: 12.5 - 630 mm/총 전력 요구량: kW 기계 무게 ca.: 기계 크기: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

X-이동: 300 mmy, 이동: 200 mmz-이동: 350 mm피드 출력: 160 kp속도: 20 - 200 mm/minrapid 회전: 1200 mm/최소 총 출력 요구량: 1.4 kW 기계 무게 약 0.45 tdimensions 약 m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 720 x 410 mmspindle turning speed range: 40 - 2000 U/min: mm/minfeeds Z-axis: mm/mintool taper: SK 40 total power requirement: 3,0 kWweight of the machine ca.: 1,4 tdimensions: 1,8 x 1,6 x 1,9 mMilling machine with- Toolmakers table- Heidenhain digital readout- Rapid traverse- Coolant system- Central lubrication- Machine feet- incl. drawer unit with contentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmtable surface area: 700 x 270 mmtaper in main spindle: ISO 40 turning speeds: 8: 150 - 1660 U/minturning speed range - horizontal: 8. 110 - 1230 U/minfeeds: 8: 25 - 285 mm/minweight: 900 kgquill stroke: 60 mmtotal power requirement: 3,7 kWrange L-W-H: 1,3 x 1,38 x 1,65 mCondition: ready for operation: Video available on our website.: CE signed: Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Cooloing pump: Digital readout 2 axis: x+y / Digidata KNT 7000 Fixed working table: Vertical milling head swivelling +quill adjustment: chip pan: Swiveling table: 600 x 250 mmSlotting head: Hub 80 mmUniversal tool milling machine 3-axis-digital read out and swivelingvertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid traverse in all three directions. Machin ...

X-이동: 450 mmy, 이동 거리: 350 mmz-이동: 400 mm, 밀링 헤드 회전 +/-: 90 스핀들 테이퍼: SK40 스핀들 회전 속도 - 무단계: 10-5000 U/기계 최소 중량 약 2 Tdimension 약 2.5 x 2.1 m 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.

travel -x axis: 3.000 mmtravel -y axis: 1.500 mmtravel -z axis: 2.000 mmcontrol: HEIDENHAIN - iTNC 530 turning speed range: 0 - 6.000 U/minwith NC rotary table: 1.600 x 1.400 mmworkpiece weight: 12.000 kgnumbers of positions in the tool changer: 40 tool taper: SK50 CNC Bed Type Milling Machine - Universal | MTE - RT-3000 equipped with integrated NC-rotary table , ITC (20 bar), radio measuring probe and 40-way tool changer.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.A machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: RT30 | RT 30The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 8.000 mmtravel -y axis: 2.600 mmtravel -z axis: 1.500 mmcontrol: HEIDENHAIN - iTNC 530 turning speed range: 20 - 5.000 U/minnumbers of positions in the tool changer: 60 tool taper: SK50 clamping plate: 10.000 x 2.500 mmCNC Milling machine | SORALUCE - FP-8000 equipped with radio measuring probe, 60-way tool changer and clamping plates.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: FP8000 | FP 8000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 2.500 mmtravel -y axis: 1.000 mmtravel -z axis: 1.250 mmcontrol: HEIDENHAIN - TNC 530 turning speed range: 20 - 4.000 U/minwith NC rotary table: 1.000 x 1.000 table surface area: 2.700 x 850 mmnumbers of positions in the tool changer: 40 tool taper: SK50 CNC Bed Type Milling Machine | SORALUCE - TA-25-A equipped with NC-rotary table, radio measuring probe and 40-way tool changer.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: A25A | TA-25 A | TA 25 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: DIN 69871 SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain TNC 310 cnc controlC and B-axis manual with displayswivel rotary tableelectronical hand wheelcoolant deviceTechnische Daten:Längsweg (X-Achse) / X-travel longitudinal 500 mmQuerweg (Y-Achse) / Y-travel cross 400 mmSenkrechtweg (Z-Achse) / Z-travel vertical 400 mmWerkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpMVorschub / feed 5000 mm/min.Gewicht ca. / weight ca. 2800 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871table:: table surface area: 700 x 500 mmmax. table load: 500 kgT-slots: 7x 14 x 63 mmtool magazin:: number of toolpositions: 60 pos.max. tool weight: 6 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange-time tool to tool: 1,6 secchange-time chip to chip: 8,0 secfeeds:: rapid traverse: 24 m/minFeed force ( X / Y / Z ): 4,5 kNfeed speeds: 1 - 24.000 mm/mintotal power requirement: 26 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,3 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: 20 bar Rotary screen: elektr. hand wheel: Signal lamp - 4 colour: direct tra ...

x-travel: 1000 mmy-travel: 450 mmz-travel: 450 mmtable surface area: 1370 x 400 mmnumber of T-slots: 5 Stck.spindle turning speed range: 32 - 1500 U/min: mm/minfeeds Z-axis: mm/mintool taper: SK 50 total power requirement: 7,0 kWweight of the machine ca.: 3,1 tdimensions: 2,1 x 1,7 x 1,9 mMilling machine with- Heidenhain TNC 135- Rapid traverse- Milling head with hydraulic tool cutting- Coolant system- Central lubricationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8.500 mmy-travel: 2.000 mmz-travel: 1.500 mmControl: HEIDENHAIN iTNC530 rapid travel x/y/z: 25.000 mm/mintable-size: 10.000 x 1.350 mmtable weight: max. 5 t/qm milling head: orthogonal 1° x 1° tool taper: SK- 50 number of spindle speeds: 4.000 U/min/rpmpower capacity: 37 kWmax. torque on the spindle: 900 NmInternal cooling system: 15 bartool change unit: 60 pos.handwheel: HR 410 Chip coveyor: Inkl. Machine on: 39.000 hSpindle hours: 16.000 htotal power requirement: 75 kWweight of the machine ca.: 35 tdimensions of the machine ca.: 12,7 x 5,2 x 4,6 mOrthogonal milling head, water-cooled, with 1° indexing in 2 axes (360 positions in the rear plane and 270 positions in the front plane)3D wireless probe M&H 20.41Partition wall for parallel operation/setupInternal air blastAdapter for high-speed milling spindles with torque supportOperator platform moves with the machineMonitored ...

: 1200 mm: 580 mm: 600 mm: 1575x425 mm: SK 40 : 152 mm: 110 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 124 turning speed range - spindle: U/mintransmission ratio: drive capacity - spindle motor: kWtension force: kNswivellable: manuell +/-45 °max. tool diameter: 125 mmmax. tool weight: 6 kgtable surface area: 400 x 800 mmT-slots: 5x14x80 max. table load: 400 kgfeed speeds: X/Y: 0 - 6.000 mm/minfeed speeds: Z: 0 - 4.000 mm/minrapid traverse: X/Y: 6 m/minrapid traverse: Z: 4 m/mintotal power requirement: 11 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,9 x 3,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mmy-travel: 2500 mmz-travel: 1500 mmspindle turning speed - stepless: 5000 U/minspindle motor: 42 kWfeeds longditudinal/cross/vertical: 15000 mm/minrapid motion -longitudinal/cross/vertical: 35 m/minno. of tools in the magazine: 60 Stückcontrol: HEIDENHAIN TNC 640 total power requirement: ca 90 kWweight of the machine ca.: 73,5 t- CNC Control Heidenhain TNC 640- Rotary-translating table 2000 × 2500 mm, load capacity 30,000 kg- Worktable 2500 × 2500 mm,- tool magazine, 60 tools, ISO 50- Laser tool integrity probe- workpiece alignment measuring probe- Coolant system- Chip conveyor- Anchoring and leveling equipment for X axis 6000 mm- Vibration detection sensor- Double cradle for loading/unloading two milling heads, with dedicated software.- Automatic head clamping system for mechanical heads + electrospindle heads- Universal head with thousandth-degree positioning, 37 kW- ...

x-travel: 6000 mmy-travel: 2000 mmz-travel: 1250 mmspindle turning speed - stepless: 5000 U/minspindle motor: 34 kWfeeds longditudinal/cross/vertical: 15000 mm/minrapid motion -longitudinal/cross/vertical: 35 m/minno. of tools in the magazine: 40 Stückcontrol: HEIDENHAIN TNC 530 total power requirement: 60 kWweight of the machine ca.: - t- CNC Control Heidenhain TNC 530- Rigid tapping for mechanical heads,- AUTOCAL software for automatic calibration- 3D workpiece alignment measuring probe.- Semi-automatic accessory change- Hydrostatic rotary-translating table TRT15, size: 2000 × 2000 mm, 15t, V-Axis 1500mm- Universal bi-rotary head with thousandth-degree positioningTaper: BT 50- Double cradle for loading/unloading two milling heads, with dedicated management software- Chain-type tool magazine, 40 positions, ISO 50- High-pressure coolant system, external/internal through the tool, with  ...

max. wheel diameter: 406,4 mmgear width: 66 mmmax. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: 3,3 x 2,5 mThe GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method.Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing.The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a dependable ch ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mQ U O T A T I O NWe are pleased to offer you ex our stock, subject to prior sale, and error in technical data :DECKEL MAHO CNC Universal Milling Machinemodel DMU 50 Myear 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual + 95 / - 10 °Table area Ø 700 x 500 mmInclination range of table (manually) +95 / -10 °Rotation of table (manually) 360 °Max. Table load approx. 200 kgMaximum distance table – spindle nose 550 mmhorizontal distance machine – spindle nose 210 – 610  ...

x-travel: 380 mmz-travel: 140 mmdist. cutter spindle - workpiece spindle: 370 mmdistance spindle - column: 163 mmtable-size: 630 x 150 mmquill stroke: 40 mmmilling head -swivable: 360 Gradspindle turning speed range: 120-2000 U/mintable feed: 35/65/170 mm/minvoltage: 380 Vweight of the machine ca.: 130 kgtotal power requirement: 0,5 kWdimensions of the machine ca.: 0,91 x , 0,68 x 1,80 mIncludes 32-piece collet setIncludes base cabinet with keyIncludes small partsIncludes operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 880 mmtravel -y axis: 630 mmtravel -z axis: 630 mmcontrol: HEIDENHAIN - TNC 426M number of spindle speeds: 12.000 U/minnumbers of positions in the tool changer: (2 x 16) 32 Tool bore: SK 40 surface area: 1.250 x 700 mmtable load: 600 kgMilling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: 80 T | 80-TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

제조사: 미크론 모델: UME600 제조 연도: 1995 기계 종류: CNC 밀링 머신 제어 장치: 하이덴하인 TNC407 스핀들 테이퍼: SK 40 스핀들 속도: 최대 5,000 rpm 급품 속도: 최대 10,000 mm/분 테이블 크기: 약 900 × 530 mm 이동 경로: X 600 mm / Y 500 mm / Z 450 mm 자동 공구 교체기 없이 모터 출력: 최대 9 kW 무게: 약 3,200 kg 상태: - 중고, 전반적인 상태가 양호합니다 - 완전 기능하며 사용 준비가 완료됨 장비 / 액세서리: - 냉각수 펌프 - 기계 바이스 - 3D 프로브 - SK 40 다양한 콜렛 세트 / 공구 홀더 - 작업대가 있는 공구�

x-이동: 1200 mmy-이동: 600 mmz-이동: 500 mm 제어: 대화 11 회전 속도 범위: 0 - 6.300 U/minspindle 테이퍼 ISO: 40 총 전력 요구: 10 kW 기계 무게 약 8 기계 치수 약 4 x 3 x 2.5 m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.

x-travel: 1600 mmy-travel: 710 mmz-travel: 700 mmControl: HEIDENHAIN, TNC 124 table surface area: 2200 x 550 mmspindle taper: SK 50 DIN 69871 spindle turning speed - stepless: 40 - 1600 U/minspindle drive: 11 kWfeed X/Y/Z-axis: 2000/2000/1000 mm/min.rapid traverse X/Y/Z axis: 5000/5000/2500 mm/minfeed motor: 3 kWdistance table / vertical spindle: 50 - 750 mmdistance table/horizontal spindle: 60 - 760 mmtable load: max. 3000 kgtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of machine L x W x H: 3,50 x 2,82 x 2,70 mAccessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmdigital readout: 3 Achsen HEIDENHAINspindle taper ISO: 40 DIN 69871Aspindle turning speed range: 50 - 4000 U/mintable-size: 800 x 400 mmtable load: 400 kgfeeds -stepless-: max. 2000 mm/minrapid traverse: 5 / 4 m/minpower capacity - milling spindle: (S1) 10,5 kWquill stroke: 80 mmcoolant: voltage: 400 Vtotal power requirement: 17,5 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 2,00 x 2,76 x 2,05 m- Serial-No.: 90395- Digital display HEIDENHAIN ND780- electr. handwheel- mechanical handwheels- stepless speed control- stepless feed drives- horizontal milling spindle- coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.