Manufacturer: SES
Model: HPC 100 N
Type of machine: Combined heat and power (CHP) compact module
Fuel: Natural gas (Erdgas)
Minimum calorific value Hi: 10.0 kWh/m3
Methane number: 80 or greater
Heating water system temperature: 70 / 90 C
Power-to-heat ratio : 0.75
Primary energy factor fp EnEV 2007: 0.76
Frequency: 50 Hz
Rated voltage Un: 400 V
Rated speed: 1,500 min-1
Electrical rated output at cos(phi)=1: 104 kW
Usable heat output: 138 kW
Fuel input: 282 kW
Electrical efficiency: 36.9 percent
Thermal efficiency: 48.9 percent
Overall efficiency: 85.8 percent
Exhaust gas treatment: Lean-burn operation with oxidation catalyst
Emissions per TA-Luft 2002 (dry exhaust gas at 5 percent O2):
Formaldehyde under 60 mg/Nm3, NOx measured as NO2 under 500 mg/Nm3, CO
under 300 mg/Nm3
Engine type: MAN E 0836 LE 202
Combustion process: Gas Otto engine
Operating cycle: 4-stroke
Cylinders and arrangement: 6, in-line
Displacement: 6.9 liters
ISO standard output per ISO 3046/1: 110 kW mechanical
Specific full-load fuel consumption: 9.23 MJ per kWh
Generator type: Leroy Somer 44.2 S7 C6/4
Apparent power: 125 kVA
Voltage: 400 V
Stator connection: Y
Maximum ambient temperature: 40 C
Protection rating: IP23
Radio interference suppression grade per VDE 0875: N
Thermal class: H
Generator weight: 460 kg
Engine cooling water heat output: 68 kW
HT mixture cooler heat output: 6 kW
LT mixture cooler heat output: 5 kW
Exhaust gas heat output (cooled to 120 C): 64 kW
Total heat output via plate heat exchanger: 138 kW
Heating water inlet temperature: 70 C
Heating water outlet temperature: 90 C
Scheduled maintenance interval: 1,250 operating hours
Engine lubricating oil volume, min/max: 24 / 34 liters
Lubricating oil reservoir tank: 70 liters
Generator efficiency at cos(phi)=1, 400V: 94.1 percent
Generator rated current at cos(phi)=1, 400V: 149 A
Radiant heat of the module: 23 kW
Supply air mass flow: 6,060 kg/h
Exhaust air mass flow: 5,487 kg/h
Combustion air mass flow at 25 C and 1,013 mbar: 573 kg/h
Supply air design temperature per ISO 3046: 25 C
Exhaust gas mass flow, wet: 594 kg/h
Exhaust gas volume flow, dry at 0 percent O2 (0 C, 1,013 mbar): 474
Nm3/h
Maximum permissible exhaust back pressure after module for
flue/chimney: 5 mbar
External fan pressure: 50 Pa
Airborne noise (sound pressure level), enclosed module at 1 m
distance: 72 dB(A)
Exhaust noise (sound pressure level) with optional silencer at 10 m
distance: 46 dB(A)
Gas inlet connection: Rp 1 1/2 inch
Exhaust outlet connection (flange): DN100/PN10
Condensate drain connection: R 1/2 inch
Heating water inlet/outlet connection (flange): DN40/PN10
LT mixture cooling circuit inlet/outlet connection: R 1 inch
Flanges conform to DIN EN 1092-1
Module length (without fan): 3,000 mm
Module width (without fan): 910 mm
Module height (without fan and feet): 1,725 mm
Operating weight, approximately: 2,750 kg
Find more here - /
Contact us at -
