금속 작업 기계 / 밀링 머신 / 범용 니 타입 밀링 머신
생산자: DMG MORI
모델:DMC 650 V
기계의 유형: 범용 니 타입 밀링 머신
품목 아니오.: 166896744
양: 1
날짜: 07.12.2025
위치:
독일
값:
Seller-item-No.:051368
| General | |
| Vertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 | |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 1-42000/1-42000/1-42000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 42/42/42 m/min |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 520 mm |
| Vertical | 475 mm |
| Tool changer | |
| Type of magazine | Chain |
| Type of gripper | Double gripper |
| Number of tools | 30 |
| Table | Table surface 960 x 570 mm |
| Maximum load (table centre) 800 Kg | |
| Slot width 14 mm | |
| Number of Slots 5 | |
| Distance between T-Slots 100 mm | |
| Spindle speed 15,000 rpm, 200 Nm | Motor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible |
| Tool magazine 30 pockets SK40 | Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazine |
| Preperation for NC-Devider EA520 direct | Preparation for NC-Divider EA520 with direct measuring system |
| Infrared measuring probe TS460 | Infrared touch probe make Heidenhain TS 460 |
| Internal coolant supply basic package 2 | Internal coolant supply basic D51252871 package 2 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 20 Bar / 290 psi Tank capacity: 600l / 158,5 US gallons Chip conveyor, Chip flushing working area Cabin roof double cartridge filter 50µm |
| Oil- and emulsion mist separator mechanical | Oil- and emulsion mist separator mechanical (only available with option cabin roof) |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air with low oil rate |
| Coolant-air blast change-over | Coolant - Air-blast changeover external switchable via M-Function |
| Package for tropical climate | Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| 2014 | DMG MORI | DMC 650 V | |
| DMG MORI | DMC 650 V | ||
| 2014 | DMG MORI | DMC 650 V | |
| 2007 | DMG MORI | DMC 60 T | |
| DMG MORI | DMC 125 U duoBLOCK | ||
| 2014 | DMG MORI | DMC 160H duoBLOCK | |
| DMG MORI | DMC 85 H monoBLOCK | ||
| DMG MORI | DMC 200 U | ||
| DMG MORI | DMC 55 H duoBLOCK | ||
| 2014 | DMG MORI | DMC 650V |
| 2014 | DMG MORI | CTX ECOTURN 650 | 110000 EUR | [Nov 2019] |
| 2014 | DMG MORI | CTX ECOTURN 650 | 97000 EUR | [Nov 2019] |
| 2017 | DMG MORI | DMC 1150 V | 113640 EUR | [Sep 2022] |
| 2017 | DMG MORI | DMC 1150 | 165000 EUR | [Oct 2019] |
| 2011 | DMG MORI | DMC 635 V Ecolin | 36000 EUR | [Nov 2022] |
| 2011 | DMG MORI | DMC 635 | 30000 EUR | [May 2021] |
| 2013 | DMG MORI | DMC 1035 V ecoline | 26500 EUR | [Nov 2022] |
| 2011 | DMG MORI | DMC 635 Ecoline | 27000 EUR | [Oct 2021] |
