프레스 사용 판매를 위해 (1,713)

: neu : 2026 : 070179 : prompt, Zwischenverkauf v : Türkei : 19900 €: 382.08 €: 1 : 150 to: fix : 300 mm: 610 mm: 1020 mm: 9 mm/s: 5 mm/s: 10 mm/s: 600x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2470 mm: 2450 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 HAND CONTROL AND FOOT PEDALtable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 3800 €: 20 to: fix : 825 mm: 520 mm: 1150 mm: 500 mm: 1800 (PSS: 1950) mmThe table can be lifted manuallyHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 20 TL: 1 speed 4 mm/s, single-hand control with lever € 3.800,00 PSS 20 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 4.500,00 PSS 20 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 5.100,00 PSS 20: same as PSS 20 NC but with stroke 500 mm € 5.200,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 12500 €: 240 €: 150 to: fix : 150 mm: 780 mm: 1000 mm: 1900 mm: 1200 mm: 2450 (PSS: 2600) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tdimensions of the machine ca.: 2 x 1,5 x 2 mstrokes per minute: 60 total power requirement: 3 kWweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 30900 €: 590.19 €: 200 to: horizontal verschiebbar : 300 mm: 1900 mm: 320x210 mm: 5 mm/s: 20 mm/s: 2460 mm: 1600 mm: 2700 mm: 4800 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo shows mod. HDK 1570/150)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 92600 €: 1750.14 €: 160 to: 6 mm: 750 mm: 1100 mm: 230 mm: 1 - 172 mm: 45 1/min: 6 : 100 mm: 80 mm: 375 mm: 540 mm: 11 kW: 1890 mm: 1950 mm: 3650 mm: 15500 kgWelded steel frame construction6-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsMechanical overload protectionTwo-hand and foot pedal operationManual stroke adjustmentMotorized ram adjustmentVariable stroke rate via frequency converterOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationTouchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs2 free cams for connecting peripheralsAutomatic central lubric ...

Pressure:315 tdistance between columns:1350 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1200 x 1300 mmtable height over floor:1245 mmside window:1250 mmram surface:1200 x 1300 mmspeed down:750 mm/sspeed up:680 mm/sworking speed:180 mm/soil volume:2000 lpower requirement:150,0 kWweight:35,0 tDimensions (WxDxH):3,3 x 3,3 x 5,5 mheight over floor:5,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch

pressure:200 tthroat:360 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:780 mmtable surface area:740 x 720 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:200 mmdie cushion area:530 x 530 mmtable height over floor:920 mmram surface:560 x 560 mmslide drill hole x depth:70 mmpower requirement:35,0 kWweight:10,0 tdimensions:1,3 x 2,0 x 3,4 m

pressure:160 tdistance between columns:1340 mmstroke:300 mmDistance table/ram, max. stroke up, adjustment up:620 mmtable surface area:1300 x 900 mmtable height over floor:930 mmside window:600 mmram surface:1300 x 900 mmspeed down:367 mm/sspeed up:390 mm/sworking speed:58 mm/spower requirement:30,0 kWweight:15,0 tDimensions (WxDxH):2,5 x 2,2 x 4,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52400 €: 990.36 €: 60 to: 1250 mm: 3 (Y1, Y2, X) : 265 mm: 1050 mm: 450 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 110 mm/s: 650 mm: 500 mm/s: 900 mm: 104 mm: 100 l: 7.5 kW: 2300 mm: 1550 mm: 2850 mm: 4700 kgStandard accessories:3 axes (Y1, Y2,X )CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesupper tool 1010 / A / 75 °, d ...

pressure:063 tstroke:70 fix mmno. of strokes:15 - 60 /mindistance between columns:1340 mmwidth between oil collecting pans:1180 mmdistance table/ram, max. stroke up, adjustment up:328 mmtable surface area:1260 x 700 mmhole in the table:1000 x 100 mmtable height over floor:1000 mmcolumn travel -side:470 mmram surface:1300 x 650 mmram adjustment:100 mmpower requirement:27,5 kWweight:13,7 tDimensions (WxDxH):3,4 x 2,1 x 3,4 mclutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric

Pressure:063 tthroat:250 mmstroke:10 - 100 mmno. of strokes:120 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:700 x 500 mmhole in the table:180 x 140 mmtable height over floor:700 mmram surface:360 x 275 mmram adjustment:60 mmpower requirement:5,5 kWweight:3,8 tDimensions (WxDxH):1,9 x 1,7 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical

pressure:150 tthroat:400 mmstroke:30 - 150 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:620 mmtable surface area:1000 x 750 mmhole in the table:320 x 200 mmtable height over floor:800 mmram surface:800 x 600 mmram adjustment:85 mmweight:10,0 tDimensions (WxDxH):1,4 x 2,2 x 3,1 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram counterbalance:pneumatic

nominal force:2500 tstroke:600 mmcycle time:13 - 18 sdistance between columns:1720 mmDistance table/ram, max. stroke up, adjustment up:2600 mmtable surface area:1720 x 1800 mmallowed max. force:4000 tblow die to die:5000 tram surface:2100 x 1320 mmcapacity of ejector in table:40 tejector stroke in table:250 mmejector surface area in table:900 x 820 mmcapacity of ejector in ram:6 tejector stroke in ram:40 mmspindle diameter:425 mmpower requirement:900,0 kWweight:335,0 tDimensions (WxDxH):3,4 x 4,6 x 9,7 mheight over floor:8,3 mfully-automated forging line:to produce axle shaft

: neu : 2024 : 7307 : prompt, Zwischenverkauf v : Italien : 11400 €: 197.76 €: 1 : 10300 €: 100 to: horizontal verschiebbar : 500 mm: 900 mm: 1050 mm: 25 mm/s: 2 mm/s: 2 kW: 1900 mm: 1000 mm: 2400 mm: 1250 kg: 650 mmSTROKE 500 MM2 speedsmachine table can be liftet with chainscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 tthroat:380 mmstroke:650 mmdistance table/ram, max. stroke up, adjustment up:950 mmtable surface area:800 x 700 mmhole in the table:200 mmtable height over floor:920 mmram surface:630 x 600 mmspeed down:65 mm/sspeed up:375 mm/sworking speed:17 mm/soil volume:350 lpower requirement:18,5 kWweight:9,0 tDimensions (WxDxH):1,5 x 2,5 x 4,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20

pressure:250 tdistance between columns:1125 mmstroke:250 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1100 x 900 mmpressure of drawing cushion in table:63 tstroke of drawing cushion in table:100 mmdie cushion area:700 x 400 mmtable height over floor:960 mmside window:700 mmram surface:1080 x 900 mmoil volume:1000 lpower requirement:35,0 kWweight:23,0 tDimensions (WxDxH):2,5 x 2,3 x 4,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary

pressure:250 tthroat:450 mmstroke:36 - 126 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:525 mmtable surface area:1000 x 750 mmhole in the table:400 x 360 mmtable height over floor:1000 mmram surface:600 x 500 mmram adjustment:111 mmpower requirement:19,0 kWweight:13,5 tDimensions (WxDxH):1,3 x 3,2 x 3,35 mclutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

pressure:100 tdistance between columns:1230 mmstroke:20 - 200 mmno. of strokes:20 - 60 /mindistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1050 x 750 mmtable height over floor:760 mmside window:540 mmram surface:1000 x 750 mmram adjustment:100 mmpower requirement:18,0 kWweight:20,5 tDimensions (WxDxH):2,8 x 1,9 x 4,3 minfinitely variable drive:PIV clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric

pressure:160 tdistance between columns:880 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:830 x 1000 mmhole in the table:265 x 365 mmtable height over floor:850 mmside window:610 mmram surface:860 x 1000 mmpower requirement:55,0 kWweight:14,7 tDimensions (WxDxH):2,2 x 2,0 x 4,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 depth stop:motoric adjustable table:motoric foundation pit:not necessary

Pressure:250 tthroat:450 mmstroke:8 - 135 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:635 mmtable surface area:1250 x 850 mmhole in the table:355 mmtable height over floor:950 mmpassage to the back:660 mmram surface:790 x 610 mmram adjustment:120 mmpower requirement:18,5 kWweight:14,0 tDimensions (WxDxH):1,5 x 2,8 x 3,65 mGerman Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 €: 1043.28 €: 200 to: 500 mm: 1000x600 mm: 640 mm: 21 mm/s: 2 mm/s: 5.5 kW: 1800 mm: 1300 mm: 2500 mm: 6400 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:500 tdistance between columns:2400 mmstroke:400 fix mmno. of strokes:13 - 23 /minDistance table/ram, max. stroke up, adjustment up:1600 mmtable surface area:2300 x 1800 mmcolumn travel -side:1600 mmram surface:2170 x 1800 mmram adjustment:300 mmtotal power requirement:110,0 kWWeight:135,0 tDimensions (WxDxH):3,35 x 4,85 x 7,0 mclutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric

: neu : ca. 4 Monate ab Auftragse : Italien : 63500 €: 1200.15 €: 70 to: 500 mm: 900x700 mm: 600 mm: 25 mm/s: 6 mm/s: 4 kW: 1140 mm: 940 mm: 2350 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 €: 2268 €: 300 to: 500 mm: 1000x500 mm: 1200x800 mm: 600 mm: 400 mm: 22 mm/s: 2 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3100 mm: 11200 kg4-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on R ...

pressure:2,5 t

pressure:300 tdistance between columns:2500 mmstroke:350 mmdistance table/ram, max. stroke up, adjustment up:1280 mmtable surface area:2500 x 1500 mmtable height over floor:850 mmside window:900 mmram surface:2500 x 1500 mmspeed down:300 mm/sspeed up:240 - 450 mm/sworking speed:23 - 44 mm/soil volume:3000 lpower requirement:132,0 kWweight:54,0 tDimensions (WxDxH):3,25 x 3,2 x 4,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:SITEMA

nominal force:100 tstroke:320 mmno. of strokes:35 /mindistance between columns:360 / 250 mmDistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:320 x 450 mmtable height over floor:660 mmram surface:250 x 280 mmspindle diameter:125 mmpower capacity:3,0 kWweight:4,5 tDimensions (WxDxH):2,0 x 1,6 x 3,1 m

Pressure:100 tdistance between columns:910 mmstroke:600 mmdistance table/ram, stroke up:1000 mmtable surface area:1340x680 / 910x1085 mmhole in the table:700 x 510 mmtable height over floor:800 mmside window:680 mmram surface:1230x680 / 910x1000 mmcapacity of ejector:7,5 tejector stroke:150 mmpower requirement:15,0 kWweight:9,5 tDimensions (WxDxH):2,3 x 1,9 x 3,6 mlight guard:Sick blank holder / ejector in ram:hydraulisch