We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usado
Sótano Sopladores de extracción 1,8 kW
usado
Keller SMM 016,0 Sopladores de extracción Diámetro 160/160mm Caudal de aire 1200 Nm³/h 1,5 kW
usado
Bodega SMM 012.0 Sopladores de extracción Diámetro 120/120mm Caudal de aire 700 Nm³/h 0,55 kW
usado
Caudal volumétrico 2.000 – 3.000 m³/h Nivel de presión acústica < 75 dB L/W/H 1,4 m / 1,4 m / 2,0 m Peso 1.025 t Potencia requerida 7.5 kW
usado
Description: Machine number: 502485 Operating voltage: 400 V Frequency: 50 Hz Connection: 5.5 kW Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 2,000 mm, weight approx.: 500 kg
usado
Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.
usado
Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES) ...
usado
Type: Vario T 1.0 L originates from LVD lasercutting machine power: 2,2 kW
usado
Datos técnicosVelocidades de husillo: 1800 rpmAire aspirado: 20 m3/minVoltaje 50 Hz 3x: 400 VoltioMotor de conducción (potencia del motor): 1,1 kWPotencia : 2,7 Peso : 100 kgMedidas :Longitud: 800 mmVadura : 550 mmAltura : 1100 mm
usado
Capacidad (x): 0 Aprobación del proceso: 0 Otra información: 0 Datos técnicos Velocidades de huso: 2850 rpm Aire aspirado: 1000 m3/h Voltaje 50 Hz 3x: 400 Voltios Motor de conducción (potencia del motor): 1,5 kW Medidas: Largo: 1200 mm Ancho: 800 mm Alerca: 2300 mm
usado
Capacidad (x): 0 Policación del proceso: 0 Otra información: 0 Datos técnicos Voltaje 50 Hz 3x: 400 Voltios Potencia instalada: 0,55 kW Peso: 60 kg Medidas: Largo: 650 mm Ancho: 500 mm Alfila: 1100 mm
usado
sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.