width of the strips: 75 mmband length: 2000 mmband speed: 30 m/stotal power requirement: 3,0 kWweight of the machine ca.: 70 kgdimensions of the machine ca.: 610 x 944 x 1419 mmMobile belt sander PASOVEC 75 RUNNERPasovec 75 RUNNER - the special belt grinder developed forSurface grinding applications, especially for grinding weld seams in thematerial surface. Pasovec 75 Runner removes unwanted layers that occur whenSheet metal rolling or after sheet metal cutting with plasma oroxygen arise.Innovative, multifunctional machineStepless adjustment of the grinding depthEquipped with a dead mans switchStation for flat grinding small workpiecesLow running costsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt measurements: 150x2000 mm: 1400/2800 U/minband speed: 16,5/33 m/stotal power requirement: 2,6/3,37 kWweight: 190 kgStandard features:- vibration-free running smoothness- Working height adjustable- S1 motors with 100% duty cycle- Surface and contact grinding is possible- Removable protective cover for surface grinding- Connecting piece for double suction- Built to CE standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3.0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo -https://www.youtube.com/watch?v=l-XFPai2BAAFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 5546 : prompt, Zwischenverkauf v : Polen : 1730 €: 1 : 150 mm: 2.000 x 150 mm: 200 x 150 x 42 ø mm: 605 mm: 3000 1/min: 3.5 kW: 1025 mm: 600 mm: 1000 mm: 100 kgIndustrial belt grinder with following features:- Separate emergency stop- Motor brake- Standard- Reliable- Simple and practical operation- Easy to adjust- Quick belt change without tools- 5-year guarantee on the motor- Optimal safetyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2160 €: 75 mm: 75 x 2000 mm: 200 x 75 mm: 530 mm: 3 kW: 35 m/s: 475 - 1240 mm: 1100 mm: 550 mm: 1035 mm: 100 kgIndustrial-belt grinding machinePowerful motorEnclosed grinding head ensure a very effective extraction systemThermal overload protectionEmergency stopElectronic motor brakeAdjustable supportEye protectionStepless adjustable working heightSelf adjusting belt tensionerOperating manual in German or EnglishALTERNATIVEVersion TAS 75X/2 with 2 speeds € 2.530,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt width: 150 mmsanding belt length: 2000 mmband speed: 33 m/secengine output: 3 kWMotor speed: 2800 UpMweight of the machine ca.: 105 kgDomestic equipments:- vibration-free running smoothness- Working height adjustable- S1 motors with 100% duty cycle- Surface and contact grinding is possible- Removable protective cover for surface grinding- Connecting piece for double suction- Built to CE standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rotary table dia.: . mmmax. dia. of grinding wheel: 300 mmwith manual ongoing: . 0manually feed: . 01,5 KWThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rotary table dia.: . mmmax. dia. of grinding wheel: 260 mmwith manual ongoing: . 0manually feed: . 01,5 KW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rotary table dia.: . mmmax. dia. of grinding wheel: 300 mmwith manual ongoing: . 0manually feed: . 01,5 KWThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rotary table dia.: . mmmax. dia. of grinding wheel: . mmwith manual ongoing: . 0manually feed: . 00.4 KW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2.000 mmband speed: U/minmotor: 400 Vloading area: 450 x 160 mmtotal power requirement: 4,0 kWdimensions of the machine ca.: 1,10 x 0,70 x 1,15 m- Serial-No.: 200.184The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mmband length: 2000 mmband speed: ~ 1800 m/mintotal power requirement: 3 kWweight of the machine ca.: 150 kgdimensions of the machine ca.: 0,511 mNo. 4904:Belt grinding machine PRIMAT, mod. BSM 75The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2280 mmband speed: 22 m/sectable-size: 700 x 350 mmroll diameter: 140 / 80 mmmotor speeds:: 2880 1/minrange L-W-H: 1300 x 800 x 1500 mmtotal power requirement: 3,0 kWweight of the machine ca.: 250 kgHorizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized tape oscillation approx. 10mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment:- swiveling grinding unit 90 - 135 degrees- Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ストリップ幅:75 mmバンド 長さ:2000 mmバンド 速度:m/最小総電力要求:kW 機械の重量 約:90 kg 機械の寸法 約:mこの広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
band width: 150 mmband length: 3500 mmband speed: 30 m/secScheiben-Ø: 400 mmgrinding feed: 0 - 5 m/minwork piece revolutions: 0 - 140 U/minpower capacity - workpiece power: 2,2 kWgrinding diameter: 100 - 600 mmclamping length: 6000 mmbed length: ca. 8000 mmvoltage: 380 V / 50 Hzmotor speeds:: 1450 U/minpower capacity: 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 8,6 x 2,6 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 750x1160x550 mmWeight: 85 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 650x1160x650 mmWeight: 125 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ストリップの幅:100 mmバンド長さ:2000 mmバンド速度:15/30 m/secチューブ径:20 - 76 mm角度調整可能 - から:30 - 90 Grad接続負荷周波数:400 V総電力要件:2,5 /3,3 kW機械の重量約:0,32 t機械の寸法約:1,2 x 0,75 x 1,4 m展示機、未使用。ベルトサンダー - 40グリットサンディングベルト - 8サンディングローラーこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 90.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 150 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...
width of the strips: 150 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight of the machine ca.: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table- ...
砥石の最大直径: - mm手動式 継続型: - 手動フィード: - 砥石径: - mm総消費電力: 1,9 / 2,6 kW 機械の重量 約: 0,25 T機械の寸法 約: 1,20,51,2 mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
ストリップの幅:150 mmバンドの長さ:2000 mmバンド速度:30-34 m/秒総電力要件:4 kW機械の重量約:100 Kg機械の寸法約:1,2 x 0,5 x 0,85 m
ストリップの幅:150 mmバンド長さ:1220 mm砥石の寸法:225 mmワークテーブル:: 150 x 400 mm最大傾斜可能テーブル表面積:150 x 130 mm接続された負荷周波数:230 V総電力要件:0,75 kW機械の重量約:35 Kg機械の寸法: 650 x 360 x 400 mm
ストリップの幅:75 mmバンドの長さ:2000 mmバンド速度:30 m/秒総電力要件:3 kW機械の重量 約:70 t機械の寸法:1,2 x 0,5 x 0,75 mベルトサンダー付き-接触ディスク:600 x 75 mm
ストリップの幅:100 mmバンドの長さ:915 mm砥石の寸法:200 x 32 mm砥石の穴径:30 mm総電力要件:0,9 kW機械の重量約:35 Kg機械の寸法:620 x 540 x 300 mm
接続負荷周波数:230 V重量:4,7 kg範囲 L-W-H:620 x 240 x 180 mm出力:0,8 KW研削バンド寸法:40 x 760 mmチューブ直径最大:180 mmバンド速度:2,4-9,1 m / sパイプ研削/仕上げ
ストリップの幅:100 mmバンド長さ:2000 mmバンド速度:15/30 m/秒チューブ直径:20-76 mm角度調整可能-から:30-90 グラ接続された負荷周波数:400 V総電力要件:2,5 /3,3 kW機械の重量 約:0,19 t機械の寸法 約:1,2 x 0,75 x 0,7 m
ストリップの幅:200 mmバンド長:1600 mmチューブ径:38 - 170 mm接続負荷周波数:400 V総電力要件:3,0 kW機械の重量:0,25 t機械の寸法 約:1,4 x 0,8 x 1,35 m11個のサンディングローラーを備えたパイプ研削盤: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mmパイプクランプエリア 170mmドキュメント(英語)
width of the strips: 100 mmband length: 1250 mmband speed: m/sectube diameter: 16,5 - 90 mmangle adjustable from - to: 0 - 65 Gradconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 1,2 x 0,6 x 1,3 mipe grinding machine with 10 grinding rollers:16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mmPipe clamping area 90mmDocumentation (English)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 2000 mmband speed: m/sectube diameter: 16,5 - 76 mmangle adjustable from - to: 0 - 65 Gradconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0,17 tdimensions of the machine ca.: 1,3 x 0,7 x 1,1 mipe grinding machine with 10 grinding rollers:16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mmPipe clamping area 90mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ストリップの幅:75 mm バンドの長さ:2000 mmバンド速度:30〜34 m /秒総電力要件:4,1 HP機械の重量:75 Kg機械の寸法:1,2 x 0,5 x 0,85 m
ストリップの幅:100 mmバンドの長さ:915 mm砥石車の寸法:100 x 915 mm作業台::225 x 155 mm総電力要件:0,44 kW機械の重量ca.:0,018 t機械の寸法ca.:0,56 x 0,26 x 0,3 m
ベルト幅:100ミリメートルベルトの長さ:1220ミリメー ルベルト速度:1140メートル/分。パッケージサイズ 大:0.62 x 0.4 x 0.35 cm総電力要件:1.5 kW機械重量約:0.04 t寸法 長さ x 幅 x 高さ:0.97 x 0.67 x 0.37 mこのマシンは、ベースなしで取り付けることもでき ます。そのため、テーブルベルト研削盤として好適 ある。この広告のデータは、LogoTech oHGのマシン管理であるModulMWSで作成されました
帯域幅:150 mm ストリップ長さ:2000 mm ベルト速度:33 m /秒 総電力要件:4 kW機械重量約:100 t所要スペース約:1.2 x 0.5 x 0.85 mコンタクトディスク付きベルト研削盤:600 x 150 mmこの広告のデータは、LogoTech oHGの機械管理であるModulMWSで作成されました
ベルト幅:75 mm ストリップ長さ:2000 mm ベルト速度:37 m/秒 総電力要件:3 kW機械重量約:0.105 t所要スペース 約:1.2 x 0.5 x 1.0 mコンタクトディスク付きベルト研削盤:200 x 75 mm-面研削テーブル連続:75 mm データfü、この広告はModulMWS - LogoTech oHGの機械管理で作成されました
帯域幅:25 mm ベルトの長さ:762 mm 砥石車寸法:125 mm テーブル最大調整可能:45度 テーブル表面:130 x 130 mm 接続電圧:230 V総電力要件:0.3 kW機械重量約:9 Kgスペース要件約:650 x 360 x 400 mmデータfü、この広告はModulMWS - LogoTech oHGのマシン管理で作成されました
ベルト幅:100 mm ベルト長さ:915 mm 砥石車寸法:200 mm 作業台:170x125 / 265x150 mm総電力要件:0.5 kW機械重量約:26 Kg所要スペース要件約:0.6 x 0.5 x 0.3 m データfü、この広告はModulMWS - LogoTech oHGの機械管理で作成されました
帯域幅:150 mm ストリップの長さ:2000 mm ベルト速度:30 m /分 研削範囲:150 x 540 mm電圧:400 V / 50 Hz総電力要件:3 kW機械重量約:110 Kgスペース要件約:1x0.5x1 mArt.-No.16680データfü、この広告はLogoTech oHGの機械管理であるModulMWSで作成されました
