布用重合機 / エッジャー メーカー : ZIMMER タイプ : サーモキュア UHD 3 年長:2005年 幅:2000mm 標高差:240メートル 暖房:高温ガス燃焼 熱油ボイラー付 テンプル:最大250°C
: 20 bore stroke: 80 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 210-2.500 UpM total power requirement: 0,38 kW Overall size: 620x470x1050 mm weight of the machine ca.: 80 kg Standard equipment: - Number of speed ranges 10 steps - Movable LED machine light - Swivel work table +/- 45 degrees - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 mm bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg Standard equipment: - Stepless speed adjustment - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding band dimension: 75 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 90 kg engine output: 4 kW turning speeds: 2800 U/min Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel size: 200 x 25 mm Shaft diameter: 20 mm turning speeds: 2.800 U/min saw band speed: 20 m/s total power requirement: 0,75 kW machine weight ab.: 17 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 150x1750 mm speed: 15/30 m/s : 83 dB engine output: 1,27/1,7 kW weight: 145 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm Cutting area at 45 degrees right: round: 110 mm Cutting range at 45 degrees right: square: 100x100 mm Cutting range at 45 degrees right: flat: 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 230 V sawband speed: 30-75 m/min. Vice opening: 230 mm total power requirement: 2,35 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Inc ...
width of the strips: 2000 mm band length: 75 mm band speed: 16,5/33 m/s turning speeds: 1400/2800 U/min weight of the machine ca.: 75 kg Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding band dimension: 150 x 2000 mm band speed: 33 m/sek. total power requirement: 3 kW weight of the machine ca.: 95 kg turning speeds: 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
band speed: 33 m/s grinding band dimension: 75 x 2000 mm total power requirement: 3 kW weight of the machine ca.: 75 kg turning speeds: 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Control: Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 105-2.650 UpM total power requirement: 0,75 kW Overall size: 750x450x1745 mm weight of the machine ca.: 192 kg Standard equipment: - Number of speed ranges 9x2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug therefore immediately ready for use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2000 mm band speed: 16,5/33 m/sec total power requirement: 2,6/3,37 kW turning speeds: 1400/2800 U/min weight of the machine ca.: 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm Cutting area at 45 degrees left: round: 150 mm Cutting range at 45 degrees: square: 150x150 mm Cutting range at 45 degrees : flat: 150x210 mm Cutting area at 60 degrees left: round: 90 mm Cutting range at 60 degrees left: square: 90x90 mm Cutting area at 60 degrees left: flat: 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm Vice opening: 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm ...
sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 3,4/4,5 kW weight: 190 kg Maximum grinding of pipes is possible: at 90 degrees max. 150 mm Ø at 60 degrees max. 127 mm Ø at 45 degrees max. 100 mm Ø at 30 degrees max. 70 mm Ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 33 m/s weight of the machine ca.: 90 kg Power: 3 KW 400V / 50Hz Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...
capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 2,6/3,37 kW weight: 190 kg Standard features: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 5.330 x 41 x 1,3 mm capacity 90 degrees: round: 460 mm capacity 90 degrees: square: 460 mm capacity 90 degrees: flat: 440 x 600 mm Cutting area at 45 degrees left: round: 445 mm : 410 mm Cutting area at 60 degrees left: round: 295 mm Cutting range at 60 degrees left: square: 295 mm table height: 890 mm cutting speed: 25 - 80 m/min total power requirement: 3,75 kW machine weight ab.: 1.500 kg dimensions: 2810 x 1135 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 23 thread capacity: M10 bore stroke: 90 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 150-1.250/350-3.000 UpM total power requirement: 0,75 kW Overall size: 735x470x1080 mm weight of the machine ca.: 106 kg Standard equipment: - Digital speed display - Movable LED machine light - Stepless spindle speed via frequency converter - Tiltable work table +/- 45 degrees - Mains cable and plug so ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 33 m/sec engine output: 3 kW Motor speed: 2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
