Tenoning spindle: 1 Stk.
Number of milling agregates: 5
St.
Spindle diameter: 50 mm
Weinig Unicontrol 12
with
radial and axial NC spindles, VARIO table, and milling
carriage
..
Machine still in operation available for
viewing!
Optionally available with used tools and window design
software
for data transfer to the Unicontrol
12!
Technical Data Summary
(Please inquire about any
additional accessories included)
..
Crosscut
Saw
..
> Electronic crosscut saw, continuously adjustable
horizontally
> Number of tools: 1
> Spindle speed: 3,000 -
6,000 rpm
> Spindle diameter: 40 mm
> Maximum tool diameter:
400 mm
> Motor power: 3.0 kW
> Laser alignment light for
detecting the saw cut
> Axial adjustment range: 150 mm,
electronically continuously adjustable NC axis
> Radial pneumatic
adjustment range: 8 positions, e.g., for edge rounding from
above
Rounding Unit
..
> Position: horizontal,
below
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
>
Tool clamping length: 25 mm
> Spindle speed: 9,000 rpm
> Tool
diameter: max. 130 mm
> Axial adjustment range mechanically
coupled to the cross-cut saw.
> Radial adjustment pneumatically
controlled on/off
Electronic length stop
..
> Length
4,100 mm
1. Tenon and slot spindle
..
> Number of
tools: variable
> Motor power: 15 kW
> Spindle diameter: 50
mm
> Tool clamping length: 640 mm, with counter bearing
>
Axial adjustment range: 580 mm NC axis, continuously variable
>
Spindle speed: 2,800 rpm
> Tool diameter: max. 400 mm
>
Follow-up counter, the entire clamping length is
countered
Transfer belt
..
For transferring parts to
the longitudinal processing area, including
double part separation
before the infeed of the longitudinal processing area.
1.
Profiling spindle (up- and down-axis rotation)
..
> Position:
vertical right
> Number of tools: variable
> Motor power: 11
kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm,
with counter bearing
> Axial adjustment range: 350 mm,
continuously variable NC axis
> Radial adjustment range: 80 mm,
continuously variable NC axis
> Spindle speed: 6000 rpm
>
Minimum tool travel circle: 140 mm
> Maximum tool travel circle:
232 mm
> 2 feed rollers, pneumatically controlled axially opposite
the spindle,
8 positions
2. Profiling unit (grooving unit
from above)
..
> Position: horizontal, top
> Motor power:
3.7 kW
> Spindle diameter: 40 mm
> Tool clamping length: 40
mm
> Axial adjustment range: 30 mm 8 positions
> Radial travel
125 mm, 8-station turret
> Spindle speed: 9,000 rpm
> Maximum
tool travel: 130 mm
3rd profiling spindle
..
>
Position: vertical right
> Number of tools: variable
> Motor
power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length:
400 mm, with counter bearing
> Axial travel 350 mm, continuously
variable NC axis
> Radial travel 80 mm, continuously variable NC
axis
> Spindle speed: 6,000 rpm
> Minimum tool travel: 140
mm
> Maximum tool travel: 232 mm
> 2 feed rollers axially
pneumatically controlled opposite the spindle,
8 positions
>
Intermittent guide rail in the stop with a rung support bar
from
above in the range of Profile milling unit on the
right
4. Profile milling unit (fitting spindle)
..
>
Position: vertical, right
> Motor power: 3.7 kW
> Spindle
diameter: 40 mm
> Tool clamping length: 160 mm
> Axial
adjustment range: 115 mm, 8 positions
> Radial adjustment range:
100 mm, 8-station turret
> Spindle speed: 5850 rpm
> Maximum
tool travel: 210 mm
> Minimum tool travel: 112 mm
5.
Profiling spindle (grooving unit from below, in the additional
column)
..
> Position: horizontal, below
> Motor power: 3
kW
> Spindle diameter: 40 mm
> Tool clamping length: 125
mm
> Axial adjustment range: 100 mm, 8 positions
> Radial
adjustment range: 100 mm, 8-station turret
> Spindle speed: 5850
rpm
> Maximum tool radius: 200 mm
Additional
features
..
> Online-capable
> Rebating device for
tear-free rebating
> Milling carriage for milling sashes with
frame widths under 500 mm.
Automatic pneumatic clamping
> 9
feed rollers controlled up/down after the last profiling spindle
for
faster and shorter remilling processes
> Feed height
adjustment G51212123 with NC axis
> Pneumatically divided
left-hand pressure guide, divided for wood widths 40-140 mm
>
Double parts package
> Return conveyor for one-person operation:
slat conveyor
> Screen control
> Inclined window device
>
Electronic angle display for inclined windows
> Control: NEXUS PC
control
> Vario table with horizontal NC axis
> Automatic
central lubrication
> Air conditioning unit in the control
cabinet
> Weinig standard production
Optional used OERTLI
tools (at an additional cost, please inquire!):
..
Systems
programmed and run-in/in production:
IV 68 wood and wood-aluminum,
IV 78 wood and wood-aluminum.
Tools (additional panes) available
for IV 92 wood and wood-aluminum
(but not programmed or
installed)
Corner joint:
Frame and sash
tenon-and-slot.
Mullions, transoms, set pieces, counter
dowels.
Individual part production, meaning sashes are
rebated on the individual part.
Special windows such as sloped
windows were rebated on the Unicontrol in the
pressed
state.
Sale of tools in the condition, scope and
with accessories as available in our
warehouse. Note on window
cuts, tool drawings, tool system listings:
Engelfried does not
guarantee that the tools actually available
correspond to the
systems mentioned and drawn.
Optional window software
ADULO/Cobus (at an additional cost, please inquire!):
..
PC
with Adulo window design software for data transfer to the
Unicontrol
If the technical specifications of this machine do
not
meet your requirements, please contact us. Our experienced
team will be happy to assist you with any customizations or help you
find a machine that meets your needs!
(Technical
specifications provided by the manufacturer - no
guarantees!)
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
