板金加工 中古 販売のため (3,285)

material width: 100 mmmaterial thickness: 15 mmno. of straightening rolls: 9 straightening feed: 7 m/mintotal power requirement: 0,75 kWweight of the machine ca.: 380 kgdimensions of the machine ca.: 710 x 920 x 1360 mmFeatures:- 5x driven lower rollers- 4x adjustable upper rollers- Max. cross-section approx. 800 mm²- Mobile use on casters- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0151 : 217 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 1 mmroll diameter: 56 mmdimensions of the machine ca.: 1600 x 700 x 1050 mmDomestic equipments:- Upper roller can be swung out manuallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35.0 tplate thickness: max. 8.0 mmthroat: 830 mmdiameter of seal: max. 105 mmtable:: 1500 x 1200 mmwork height max.: 920 mmdie stroke: ca. 90.0 mmstrokes per minute: ca. 200 Pressure power: 220 baroil volume: 80.0 ltotal power requirement: 4.0 kWweight of the machine ca.: 3200 kgrange L-W-H: 1600 x 1800 x 1800 mmThe IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force.Features:- Electro-hydraulic punch press with long reach - Robust C-frame construction Solid cast or welded frame (C-shape) Extremely high punching precision Compact design = small footprint Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable control ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 €: 630.3 €: 2530 mm: 6 mm: 6 mm: 4 mm: 190 mm: 5.5 kW: 4250 mm: 1200 mm: 1150 mm: 3750 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 80 x 16 (d 1200) mmI-beam section - upend: 50 x 15 (d 1000) mmL-beam: 50 x 5 (d 1200) mmround material: 40.0 (d 800) mmbar material dia. max.: 70 x 2.0 (d 1600 ) mmsquare material: 80x30x3 (d 4000) mmchannels - flange: UNP 80 (d 800 ) mmbending speed: 4.4 m/minroll diam. toproll: 157 mmbore: 50.0 mmoil volume: 18.0 Litertotal power requirement: 1.1 kWweight: 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- electro-hydraulic ring/profile bending machine- hydraulic bottom/side roller adjustment for extra small bending radii- bottom/side roller can be adjusted individually- 3x driven rollers- divided roller segments- digital position display of the bottom/side rollers Display with touchscreen function- hardened tool holder (42CrMo4)- machine base- 2x manually adjustable side guides- h ...

plate thickness: 4 mmcutting angle adjustment: 30-120 °table height: 900 mm: 407 weight of the machine ca.: 760 kgdimensions of the machine ca.: 1300x1000x1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmcutting angle: 0.5 - 2.5 °no. of strokes: 8 - 25 Hub/minback stop - adjustable: max. 1.000 mmControl: SIEMENS Number of downholders: 13 Stk.oil volume: 300 ltr.engine output: 21.0 kWweight: 8700 kg.range L-W-H: 3950 x 2200 x 1900 mmFeatures:- Robust electro-hydraulic sheet metal shear Design: Circuit-guided- NC electro-motorized backgauge with SIEMENS NC control unit OP 7 Input of target and actual position values- NC electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front via handwheel- Recessed grips in the front support table- Front finger guard- 1x long side fence- 1x long support arm- 1x freely movable foot switch- Original operating instructions (NL) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 4.5 mm: 4.0 mmroll length: 2050 mmmin. dia.: 210 mmroll diam. toproll: 140 mmweight: 1530 kgrange L-W-H: 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on requestFeatures:- Robust electromechanical bending machine- 2 central rollers driven by electric motors (top & bottom rollers)- Top roller manually swivels out, with hinged bearing- Includes tapered bending attachment- Freely movable control panel- Bottom roller manually adjustable via handwheel- Asymmetrical roller arrangement- Self-braking main motor- Safety device (safety tether with switch unit)- CE marking/Declaration of ConformityOptional equipment included in the price:- Hardened rollers- Motorized side roller adjustment- Digital position display for motorized adjustable side rollerThe data for this ad was created with Mo ...

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours- in checked condition - machine video -https://www.youtube.com/watch?v=PBV-MDtZnlEEquipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface- CNC controlled axes: Y1 + Y2  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 28 mm: 28 mm: 22 mm: 26 mm: 23 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

tube diameter: 60 mmwall strength: 3 mmbending radius min.: 2 x Rohr-Ø ÷ R200 mm: 0 - 180 °: 2 (60.,3mm) mm: stufenlos 0,5 - 2,0 : 1,5 kW: 700 kg- Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length)- Electromechanical drive of the bending axis- hydraulic clamping- mandrel feed / extract- 30 programs x 9 bending angle + correction angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate length: 1000 mmPunching capacity: 28 toweight of the machine ca.: 11.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090131 : prompt, Zwischenverkauf v : Türkei : 4700 €: 109.71 €: 1 : 50 mm: 155 mm: 2 : 1.5 kW: 4,5 m/min: 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm: 750 mm: 1450 mm: 390 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 €: 226.56 €: 60 mm: 215 mm: 215 mm: 3 : 1.5 kW: 4 m/min: 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm: 1400 mm: 1650 mm: 950 kg3 mech. driven rolls (brake motor)hardened shafts top roll hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 260 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3100 mmheight: 120 mmwidth: 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on RequestV-Openings:- 80.0 mm / 85° / R 10.0 with guide rollers- 50.0 mm / 85° / R 5.0 with guide rollers- 35.0 mm / 85° / R 4.0- 22.0 mm / 85° / R 2.5- 2x Mounting Screws incl. Link ChainThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5500 €: 106.15 €: 2.5 mm: 160 mm: 250 nm: 4 Stk.: 96 mm: 13 1/min: 1475 mm: 550 mm: 1200 mm: 320 kgreduction motor with brake systemmovement of rolls with foot pedaladjustable idle rollsteel shafts with bronze bushings4 set of rollscomplete with standuser manual in GERMAN or ENGLISHaccording to CE rulesALTERNATIVE (PRICE ON REQUEST):HIBKS 2,5 with hydraulic upper roll feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 8.0 mmthickness at Niro-steel: 6.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

sheet width: 1050 mmplate thickness: 3.3 mmpre-bending: 3.0 mmroll length: 1050 mmroll diameter: 90.0 mmmin. dia.: 130 mmengine output: 1.10 kWweight: 570 kgrange L-W-H: 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon requestFurnishing:- Robust electro-mechanical bending machine- 2x central rollers driven by an electric motor (top and bottom roller)- Top roller can be swiveled out manually, with folding bearing- including conical bending device- freely movable control panel- Lower roller manually adjustable, by hand wheel- asymmetrical roller arrangement- self-braking main motor- Safety device (safety line with switch unit)- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized side roller adjustment- Digital position display for motor-driven adjustable sid ...

sheet width: 3100 mmplate thickness: 13,0 mmthickness at Niro-steel: 8,0 mmdown holder: 14 Stückno. of strokes: 11 Hub/minoil volume: 310 ltr.cutting angle: 2,0 °throat: 350 mmtable height: 900 mmtotal power requirement: 22,0 kWweight of the machine ca.: 12200 kgrange L-W-H: ca. 4100 x 2300 x 2235 mm--------------------------------------------------heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tr ...

Punching capacity: 220 kNplate thickness: 8 mmworking area: 2535x1280 mmsheet thickness for stainless steel: 4-6 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090180 : prompt, Zwischenverkauf v : Türkei : 8300 €: 160.19 €: 1 : 50 mm: 152 mm: 162 mm: 3 : 1.1 kW: 4,5 m/min: 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm: 950 mm: 1500 mm: 500 kg3 mech. driven rolls (brake motor)hardened shafts top roll hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mmplate thickness: 25 mmpre-bending: 18 diameter of upper rolls: 320 mmside roll diameter: 260 mmdiameter of lower rolls: 320 mm: 26 kW: 8100 kg: 4700 x 2000 x 2200 mmFeatures:- Hydraulic side roller adjustment- Conical bending device- 2 driven rollers- Hardened rollers- Hydraulic folding bearing- Mobile control panel- Foot switch- Safety device- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mmroll diameter: 315 mmbending speed: 5 m/minbending capacity - flat iron: max. 12 x 20 mm: 75 mmDrive: 11 kWweight: 2.600 kgrange L-W-H: 1950x1600x2100 mmEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10500 €: 201.6 €: 1050 mm: 4 mm: 110 mm: 2.2 kW: 1100 mm: 750 mm: 1000 mm: 990 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS (PRICES ON REQUEST):hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 tchamfer lenght: 1275 mmdistance between columns: 1040 mmcolumn arm: 250 mmram stroke speed: 225 mm/secwork speed: 0 - 9.8 mm/secreturn speed: 160 mm/secwork stroke: 215 mmdayligth: 512 mmtable height: 800 mmback stop - adjustable: 600 mmcontrol: DELEM DM 51 operating pressure: max. 300 baroil volume: 150 ltr.voltage: 400 Vengine output: 6.0 kWWeight: 4300 kgrange L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=5L8L2AYv0PU-------------------------- -----------------------------PLACKE electro-hydraulic CNC press brakespecially developed for the production of small partsThe advantages:• Low energy consumption• High operating comfort• Wide range of applications• Fast, robust, low-noise• With CNC control as standard-- ...

sheet width: 2100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 190 mmside roll diameter: 150 mmdiameter of lower rolls: 170 mmtotal power requirement: 3,0 kWweight of the machine ca.: 3.290 kg.dimensions of the machine ca.: 4042 x 1380 x 1254 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution  ...

tube diameter: 33,7 x 3,4 GAS mmtube diameter: 35,0 x 2,5 STAHL mmtube diameter: 35,0 x 1,5 EDELST mmbending radius min.: R10 - R 190 mmbending angle max.: 0 - 180 °tool taper: 6-kant 40 mmvoltage: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 23,0 kgDescription:- MediBender 070 digital- with maximum bending performance for 35 x 2.5 mm steel tubes- Excellent bending quality with very tight bending radii. (from 2 x tube diameter) and bending angles between 0° and 180°- Easy to operate- High accuracy and reliability- Fast tool changes (within seconds)- Easy to transport- Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0007 : 217 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.