旋盤 中古 販売のため (3,094)

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 76 mm-Take: short taper 6, cone Ø 105 mm-Dimension: Ø 210 x 65 mm-Weight: 3.5 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 30-39 mm-Type designation: not available-Dimensions total Ø 180 x 75 mm-Weight: 5.9 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe-Manufacturer: WMW, automatic lathe type DRT 50m-Turning length: 550 mm-Turning Ø over bed: 530 mm-Spindle bore: Ø 63 mm-Spindle speeds: 9 - 450 rpm-Three jaw chuck: Ø 200 mm-Turret: with accessories, see photos-Drive motor: 5.3 / 6.8 kW-Dimensions: 2420/1040 / H1460 mm-Weight: 2200 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 50-60 mm-Type designation: not available-Dimensions total Ø 180 x 90 mm-Weight: 8 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 56-59 mm-Type designation: not available-Dimensions total Ø 260 x 120 mm-Weight: 14.3 kg

spindle head for lathe, lathe spindle head, lathe spindle head-Manufacturer: Scherer, spindle head from vertical lathe VDZ 80-Clamping head: Hainbuch SK80BZIG SP.0219.0034.00-Clamping device: SMW Autoblok Cil.85 SIN-S no-cc-Individual components: see photos-Price/Delivery: complete-Dimensions: 1350/560/H495 mm-Weight: 330 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 49-64 mm-Type designation: not available-Dimensions total Ø 210 x 125 mm-Weight: 10.9 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 163 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 220 x 85 mm-Weight: 8 kg

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 50 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 210 x 85 mm-Weight: 5 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 230 x 85 mm-Weight: 10.3 kg

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 280 mm-Inside: Ø 105 mm-Take: cone Ø 138 mm/short cone 8-Dimension: Ø 280 x 35 mm-Weight: 13 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm -Weight: 4.7 kg

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 225 mm -Mounting: cone Ø100-102 mm -Bolt circle: Ø 140 mm -Dimensions: Ø 225 x 165 mm -Weight: 8.1 kg

Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 160 mm -Hole: Short cone 4, cone Ø 60 - 63 mm -Bolt circle: Ø 85 mm -Dimensions: Ø 160 x 70 mm -Weight: 2.6 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine horizontal -Manufacturer: WMW, counter bearing from milling machine FW 400 x 1600 -Dimensions: see drawing in the photos -Transport dimensions: 1505/400/H345 mm -Weight: 370 kg

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck -Outside: Ø 280 mm -Inside: Ø 105 mm -Mounting: Short taper 8 (139.7 mm) -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Chuck flange: for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Passage: Ø 44 mm -Bolt circle: Ø 105 mm -Mounting: cone Ø 79-82 mm -Dimensions total Ø 205 x 160 mm -Weight: 6.3 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine-horizontal -Manufacturer: WMW, counter bearing from milling machine -Dimensions: see drawing in the photos -Dimensions: 295/76/H125 mm -Weight: 6.5 kg

Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed-Guide track: from Meuselwitz lathe-Measures: see drawing in the photos-Dimensions: 780/355 / H390 mm-Weight: 135 kg

Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks-Chuck size: Ø 160 mm-6 set: clamping jaws-Weight: 17.5 kg

誘導・引っ張りスピンドル旋盤 OPTIMUM「Optiturn 4210 V」 3軸デジタルディスプレイ付き 制作年:2015年 スピンドルボア:54 mm 中心幅:1000 mm 中心高さ:200 mm 速度範囲:30 – 3000 rpm 無段差速度(ディスプレイ付き) 以下のアクセサリー付き: マルチフィックスツールホルダー 冷却材のセットアップ 三つジョーチャック0 200mm フォージョーチャック0 250mm コレットチャック(最大0 32mm)まで完備 給弾保護 照明によるチップ保護 固定リネット0 約150 mm リネット0の移動:約100 mm 4つの高さ調整可能なマシンシュー 1枚。回転センタリングチップ 操作指�

Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.

古いマーティン製自動旋盤も利用可能です。センタ� ��ハイト:355mm、ベッド/スライド上の旋回直径:720mm/515 mm、フェイスプレート直径:710mm、3つジョーチャック� ��径範囲:250mm-500mm、クランク:980mm、スイング径:1030mm� ��ベッド幅:530mm、速度:1400rpm、クイル径:1150mm、最大� �イルストローク:280mm、最大ワークピース重量:約4000k g、重量:約4900kg。資料はご用意しています。現地で� �検査も可能です�

Key data: 130 mm, 160 mm, 6000 1/min

CNC旋盤 ARIX / HUMMER T-42CL + バーローディングマガジン ロバスト ニトロ+チップコンベヤー – 製造年 2025年 販売中は、バーローディングマガジン「ロバスト・� ��トロ」を含む、ハマーT-42CL(ARIX CNCマシン)型の最新CNC旋盤です。 この機械は2025年に製造され、非常に良好な状態で、 コスト効率の高い量産に最適です。 技術データ: モデル番号:T-42CL 製造元:ARIX CNCマシン(台湾) 製造年:2025年 スピンドル回転数:最大6,000 rpm バー通路:42 mm 最大旋回径:約130 mm 最大旋回距離:約160 mm アクスル: X:225mm Z:235mm Y軸:385 mm 主軸: 出力:7.5 kW コレットホルダー:A2-5 ツールステーション: 旋盤工具5基+駆動金具4基 合計:8区画 機械重量:約3,300〜3,500 kg 装備: バー装填マガジン � ...