フライス盤 中古 販売のため (2,541)

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

x-travel: 3500 mmy-travel: 1000 mmz-travel: 900 mmControl: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 21 tdimensions of the machine ca.: 10770 x 4100 x 3150 mControl system: Heidenhain iTNC 530Operating hours: 54631 hX-axis 3500 mmY-axis 1000 mmZ-axis 900 mmDrive power 30 kWSpeed range 20–3800 rpmRapid traverse 15 m/minFeed rate 4 m/minClamping surface 2x 1600 x 960 mmMax. table load 2 x 4000 kgMachine weight (approx.) 21 tMachine dimensions (WxDxH) 10770 x 4100 x 3150 mmTechnical data / AccessoriesUniversal bed-type milling and boring machineMilling head position: Vertical, horizontal (top, center, left, right)Heidenhain TS 120 3D touch probeKekeisen TW 32 drum-type tool changerKnoll hinged-belt chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: . mmthreading length: . mmmax. module: 10 min. module: 1 diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/minVarious reconditioned milling heads and other accessories available for HECKERT ZFWVG 250 long-thread and gear hobbing machines.- Heavy-duty gear hobbing head ApFW (reconditioned)- Heavy-duty thread milling head ApGs (reconditioned)- Thread milling head ApG (reconditioned)- ApGi internal milling head (refurbished)- Various bushing sets- Lunettes- Counterholder with 3-jaw chuck- Various milling mandrelsand much more, as shown in the picturesIf you are interested in individual items or the entire package, please send me your price proposal.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 17700 mmy-travel: 4755 mmz-travel: 800 mmmilling width: 3450 mmdistance table - vertical milling spindle: 3682 mmtable height over floor: 500 mmspindle diameter in front bearing: 200 mmturning speed range: 12 - 450 U/mintool taper: ISO 60 axial adjustment of the spindle slide: 800 mmcreep feed: 5 und 50 mm/minfeed stepless: 10 - 3000 mm/mincross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minrapid traverse: 10 m/mincreep feed: 3 und 30 mm/minfeed stepless: 6 - 2000 mm/minvertical adjustment of cross beam: 3682 mmrapid traverse: 1,5 m/mincreep feed: 1,25 und 12,5 mm/minfeed stepless: 5 - 1500 mm/mintable-size: 17800x2800 mmcolumn daylight: 3600 mmControl: SIEMENS 840 C table load: 50.000/100.000 kgdrive of main spindle: 100 kWtotal power requirement: 170 kWweight of the machine ca.: 300 tdimensions of t ...

x-travel: 10000 mmy-travel: 1500 mmz-travel: 3000 mmControl: Heidenhain TNC 430 tool taper: ISO BT 50 spindle turning speed - stepless: 10 - 3000 U/minfeed range: 10000 mm/minrapid traverse: 15 m/minmain drive motor: 37 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyorOptional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm- Table load 30 to- Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 2013 Overhauled by REIDEN SWISS- New regrinded- New iTNC530- New Hr410 Handwheel- New CE-Safety - New Milling head gears and bearing- New LS186C Glas scales- New Blum TC60 3D taster- Geomtrical DIN 8615 !- Overhauling cost CHF 250k

: gebraucht : 2002 : 4543 : prompt, Zwischenverkauf v : Spanien : 11400 €: 1 : 50 - 1700 (12) U/min: ISO 40 : 600/210/400 mm: 800 x 225 mm: 1700 mm: 1500 mm: 1960 mm: 950 kg: 1,5 kWwith 3-Axis Digital display Fabr. Time Technology EuropeSwivelling universal milling head (Huron design)Horizontal milling device with counter bearing and 1 pc. long milling arborCoolant deviceMachine lightautomatic feeds in X and YMachine feet with vibration absorbersno User ManualDOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVOBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return po ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48800 €: 932.08 €: 40 -3200 U/min: ISO 40 : 600 x 500 x 400 mm: 1000 x 500 mm: 3.75 kW: 1814 kg: 1000 mm/min: 8 : 14 x 63 mm: 300 kg: 600 mm: 500 mm: 400 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 40 - 3200 : 40 - 3200 : +/- 90° °: 100 mm: manuell : 3,75 kW: 1200 x 250 mm: 160 - 660 mm: 95 - 495 (2. T-Nut), 180 mmswiveling operating panel3 axes digital read out Fagor 400ib Innovamotor for horizontal- and vertical spindle: 3,75 kWfeed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guard with doors with switchesouter arbor support for horizontal spindleLED work lampautomatic lubrication for X/X/Z guidwa ...

x-travel: 700 / 710 mmy-travel: 275 mmz-travel: 350 mmtaper in main spindle: ISA 40 table surface area: 900 x 250 mmT-slots: 3 x 18 x 60 Stk.turning speeds: 32.0 - 2000 U/minfeed stepless: 15 - 750 mm/minvoltage: 400 Vtotal power requirement: 4.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 1000 x 1400 x 1800 mm from a training workshop (vocational school)Features:- Robust, electric-motor-driven universal milling machine- With horizontal and vertical main spindles Vertical main spindle can be swiveled 360° in two planes- Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light- Control cabinet, installed on the right- Original operating instructions Machine data sheetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtaper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mmT-slots: 6 Stk.turning speeds: 50 - 2500 U/minfeed stepless: 4-1600/4-1000 mm/minvoltage: 400 Vtotal power requirement: 5.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=iSTVEdv2fO8Furnishing :- robust universal milling machine- swiveling control panel, right front- rotatable universal milling head (re/li = 90°) with hydraulic tool clamping- manual milling spindle feed, with locking- swiveling milling spindle protection- Stable T-slot clamping/angle table- Axis feeds with rapid traverse- Central lubrication unit- Control cabinet, installed on the left Digital display - without functionThe data for this ad was created with M ...

x-travel: 1016 mmy-travel: 610 mmz-travel: 760 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 410 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: 2500 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 600 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 280 / 300 mmy-travel: 250 / 270 mmz-travel: 300 / 310 mmturning speeds: 45 - 2240 U/minturning speeds: 18 Stufenspindle taper ISO: 40 quill stroke: 60.0 mmtable:: 670 x 320 mmtable load: 150 kgfeed range: 12.5 - 630 mm/minfeed: 18 Stufenrapid traverse: 1.200 mm/minworkpiece weight: max. 150 kgT-slots: 5x 12 x 63 mmtotal power requirement: 1.6 kWweight of the machine ca.: 1100 kgrange L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=7IsC5cg9WlIFeatures:- Robust electric-driven universal milling machine- ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button- Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions- Pivoting milling spindle guard- Coolant system- Lower chip tray- Vertical milling head wit ...

x-travel: 750 mmy-travel: 230 mmz-travel: 360 mmtotal power requirement: 5 kWweight of the machine ca.: 1.3 trequired space: 1.65x1.3x2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 155 mmz-travel: 350 mmtaper in main spindle: SK 30 / DIN 2080 table surface area: 640 x 200 mmturning speeds: 50 - 1500 U/minfeeds: 30 - 340 mm/mindistance spindle - column: 165 mmdistance spindle nose and table: 245 mmvoltage: 380 Vtotal power requirement: 1.3 kWweight: ca. 1250 kgrange L-W-H: 950 x 1000 x 1600 mm from a vocational school (!)Furnishing :- robust / conventional universal milling machine- rotatable / swiveling vertical milling head- Stable T-slot clamping/angle table- automatic table longitudinal movement- Feed range adjustable - 8x steps- Pole-changing drive motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 560 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 7 kWweight of the machine ca.: 1.8 trequired space: 2.3x2x2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): / mmx-travel: 1750 mmy-travel: 1250 mmz-axis: 1250 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 600 mmz-travel: 460 mmtotal power requirement: 4 kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmtable-size: 205 x 800 mmT-slots: 4 x 45 14 H7speeds: 50 - 3150 U/mintool taper: 40 ISOquill stroke: 50,0 mmFeeds X + Z Axis: 5.0 - 1000 mm/minFeeds Y Axis: 5.0 - 670 mm/minrapid traverse: 2.4 / 1.6 m/mincontrol: Heidenhain total power requirement: 5.1 kWweight: 950 kgrange L-W-H: 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition ()Equipment:- MAHO universal tool milling/drilling machine- HEIDENHAIN TNC 135 positioning/path control 3-axis manual data input control Programmable by the machine operator Convenient and easy operation- Electric motor-driven feed rates in all axes (X/Z/Y) X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min- Tiltable milling head to both sides- Tiltable T-slot universal table- Vertical clamping range- Continuously ...

x-travel: 400 mmy-travel: 390 mmz-travel: 350 mmControl: DIALOG4/CONTOUR 3 tool taper: SK 40 spindle turning speed range: 31 - 3150 U/minfeed range: 10 - 2000 mm/mintotal power requirement: kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1.600 x 2.500 x 2.000 mmCNC control DIALOG4/CONTOUR 3 Table: 700 x 480 mm rigid angle tableSwivel-type vertical milling headCoolant tankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 2456Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Drive: 4 kWDigital display MitutojoUniversal built-in rotary table 1050 x 627 mmQuill feed gear 0.02 - 2 mm/revSpindle ISO 40,Speed range 32 - 1600 1/min,feeds 5-500 mm/min,rapid traverse 1.4 (0.7) m/minCross table movement by hand 225 mm,Table top rotation 360 °Table swivel/tilting +- 30 ° eachSpace requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 to.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 400 mmz-travel: 370 mmControl: Retrofit Dialog 11 - 7.07 table surface area: 1400 555 mmtotal power requirement: 5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 332,2 mPacking: 3 mRetrofit by FPSAlternate NC - Rotary Table availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290/300 mmy-travel: 150/160 mmz-travel: 330/340 mmtotal power requirement: kWweight of the machine ca.: 675 kgdimensions of the machine ca.: 2700 x 2500 mmThe machine was overhauled by the company Harich in 2017.Machine number: 57330/08Technical data:Table longitudinal movement (motorized/manual): 290/300 mmSpindle head transverse movement (motorized/manual): 150/160 mmSupport vertical movement (motorized/manual): 330/340 mmAngle table clamping surface: 600 x 210 mmSpindle speeds: 40 – 2000 rpmTool holder: Standard taper 40Motor power: 1.5/1.9 kWFeed rate range (infinitely variable): 5 – 500 mm/minRapid traverse: 1200 mmEquipment:3-axis digital readout (Heidenhain)Vertical milling spindle with quill adjustmentAdditional horizontal spindleREPAR 2 safety device (www.repar2.com)Operating manualThe machine will be loaded onto a Euro-pallet, total height: 1900 mm.The data for t ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain TNC 113 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5152Universal tool milling machineDeckel FP 4 M (K) - 2203Working area: 500 x 400 x 400Drive: 4 kWSpindle holder SK 40 / DIN-2080Speed range 50 - 2,500 min-1Feed rates 8-630 mm/min steplessRapid traverse 1.3 m/minFixed table 800 x 460 mmChip trayHeidenhain TNC 113 Active Digital readoutSpace requirement approx. 2 x 2 x 2mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mmy-travel: 1350 mmz-travel: (Vert.) 1600 mmControl: Heidenhain iTNC 530 table surface area: 4200 x 1150 mmtable load: 13 ttool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/mintransmission ratio: 2 spindle motor: 28/38 kWfeed range: 5000 mm/minrapid traverse: (X/Y) 12 m/minrapid traverse: (Z) 10 m/minweight of the machine ca.: 37 tdimensions of the machine ca.: 12,9 x 6,53 x 3,79 mIn January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro.Working hours (dated 31. July 2025):Machine on: 38.483 hAuto cycle: 12.798 hSpindle hours: 11.645 hA current geometry measurement report is available. CNC-control HEIDENHAIN iTNC 530 Electronic handwheel 50-position tool changer Controlled universal milling head, indexable 2.5 / 2.5 deg. Coolant device Cooling through the spindle 2 chip conveyors Oil cooler Measuring ...

x-travel: 700 mmy-travel: 560 mmz-travel: 450 mmtotal power requirement: 3 kWweight of the machine ca.: je 2,5 tdimensions of the machine ca.: je 332,5 mBundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 315 mmy-travel: 180 mmz-travel: 320 mmtaper in main spindle: ISO 40 table surface area: 600 x 250 mmT-slots: 5 Stk.turning speeds: 45.0 - 1950 U/minfeed stepless: 10 - 170 mm/minvoltage: 400 Vtotal power requirement: 5.1 kWweight of the machine ca.: 1300 kgrange L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained ()Features:- Robust electric motor universal milling machine- HEIDENHAIN 3-axis digital display- Rotatable universal milling head (right/left = 90°)- Manual milling spindle feed, with lock- Stable T-slot clamping table- Axis feed with rapid traverse in X+Z+Y axis Rapid traverse continuously adjustable - Swiveling machine light- Control cabinet, installed on the left- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmControl: Contour 3 / Dialog 4 total power requirement: 5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 5268:Universal tool milling machineMake DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unitWorking area: 300 x 300 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.