フライス盤 中古 販売のため (2,542)

Stepcraft portal milling machine with 3D print head Auction-ID: A7-50850-9

vertical and horizontal table feed: 150 mm,max. diameter of the machined gear: 125 mm,max. width of the machined gear rim: 140 mm,max. length of the machined gears: 300 mm,max. module of the machined gears: 2.5,max. helix angle of the machined gear teeth: 45 degrees Auction-ID: A1-50601-42

x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 35 / 25 kWtool taper: SK 40 work table:: table surface area: 2.900 x 700 mmmax. table load: 2.150 kgtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 40 m/minfeed speeds: max. 40.000 mm/minfeed power: max. 8 kNtotal power requirement: 54 kVAweight of the machine ca.: 14,4 tdimensions of the machine ca.: 8,0 x 5,6 x 2,8 mChip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setting: Blum - LaserCo ...

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmturning speeds: 50- 4000 U/mintotal power requirement: 17,5 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 2,0 x 2,7 x 2 mDescription:- excellent condition- Heidenhain ND780 digital readout- infinitely variable speed control- infinitely variable feed drives- hydraulic tool clamping- mechanical handwheels- electronic handwheel- drilling quill- horizontal milling spindle- coolant systemX-travel 620 mmY-travel 420 mmZ-travel 400 mmSpindle taper ISO 40 DIN 69871ASpindle speeds 50 - 4000 rpmTable size 800 x 400 mmTable load 400 kgFeed rates infinitely variable, max. 2000 mm/minRapid traverse 5 / 4 m/minDrive power - milling spindle (S1) 10.5 kWQuill stroke 80 mmCoolant systemOperating voltage 400 VTotal power requirement 17.5 kWMachine weight approx. 1.9 tSpace requirement approx. 2.00 x 2.76 x 2.05 mThe data for this ad was cr ...

Year of manufacture: 1999Serial number: 1137Hour meter: 4,468 hNumerical control: Heidenhain TNC 310 (3 axes controlled)Longitudinal stroke (X): 1,000 mmTransverse stroke (Y): 450 mmVertical stroke (Z): 600 mmTable dimensions: 1,000 x 450 mmPermissible load on table: 500 kgSpindle taper: ISO 40Rotational speed: up to 4,000 rpm (depending on variation ranges)Spindle motor power: 6.6 / 9.3 kWOverall dimensions (L x W x H): 2,300 x 2,300 x 2,400 mmTotal weight: approx. 3,200 to 3,500 kgDisassembly and loading costs: €300 Auction-ID: A1-50714-4202

Manufacturer: LAGUNYear: 1991Type: CNC universal milling machineNumerical control: Heidenhain TNC 355Axes: 3 axes (X, Y, Z)Strokes: X 1100 mm / Y 600 mm / Z 600 mmTable: 1200 x 550 mmSpindle: 50 to 3000 rpm – motor power 20 kWEquipment: HURON universal head type, coolant systemRemarks: Robust CNC universal milling machine for heavy and versatile milling. Auction-ID: A1-50714-4069

MTE K-15 bed milling machineTechnical data:Clamping surface: 1,700 × 750 mmSpindle speed: 40–3,000 rpmTool clamping force: 1,500 daNMilling feed: 0–12,000 mm/minPositioning feed: 15 m/minPositioning accuracy: < 0.012 mmRepeatability: < 0.007 mmMachine weight with ATC: approx. 8,500 kg Auction-ID: A7-50868-1

Control: Grundig Numerik NC Pilot Table dimensions: 800x360 mm The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-3

Serial number: 22760Longitudinal stroke (X): 800 mmCross stroke (Y): 550 mmVertical stroke (Z): 500 mmSpindle taper: ISO 40Spindle speeds: up to 4,000 rpm (or 6,300 rpm depending on transmission/drive versions)Motor power: 7.5 kWOperating voltage: 380 V three-phase, 50/60 Hz Auction-ID: A1-50714-4201

Year of manufacture: 1986Machine no.: 16401Longitudinal stroke (X): 800 mmCross stroke (Y): 300 mmVertical stroke (Z): 520 mmTable dimensions: 1200 x 280 mmWeight: 2,150 kg Auction-ID: A1-50714-4080

Manufacturer: CMEYear: 1991Type: CNC Universal Milling MachineNumerical Control: Heidenhain TNC 124Axes: 3 Axes (X, Y, Z)Strokes: X 1100 mm / Y 700 mm / Z 500 mmTable: 1400 x 450 mmSpindle: ISO / SK 40 – 40 to 1800 rpm – motor power 10.6 kWDimensions: 2400 x 2150 x 2100 mmWeight: approx. 3800 kgNotes: Robust universal CNC milling machine made in Spain. Auction-ID: A1-50714-4076

Longitudinal Stroke (X): 850 mmTransverse Stroke (Y): 275 mmVertical Stroke (Z): 370 mm Auction-ID: A1-50714-4203

Auction-ID: A1-50867-46

In metal case Auction-ID: A1-50226-53

In metal case Auction-ID: A1-50226-52

Auction-ID: A1-50750-435

Equipped with: has a table of 1350 × 320 mm, a longitudinal travel of 700 mm, a transverse travel of 240/260 mm, a vertical travel of 370 mm, 18 spindle speeds of 31.5–1600 rpm, a main motor of 7.5 kW, a number 3 spindle cone, a spindle bore of 29 mm, a swivel range of ±45°, a maximum workpiece weight of 250 kg Auction-ID: A1-47365-10

Combination lot with Nilfisk industrial vacuum cleaner, floor mixer and AGP slot saw Specifications: 1 x Nilfisk industrial vacuum cleaner Model: VHS120-H / VHS120 Special Serial Number: 3820231900265 Power: 2.00 kW Connection: 230 V Rated current: 8.50 A Frequency: 50/60 Hz Weight: 45 kg Protection class: IP44 Year of manufacture according to type plate: 05-2023 1 x floor processing machine, brand/type according to type plate: LFR-E-4-S Serial Number: FIQ20220074 Connection: 400 V / 50 Hz Equipped with electric motor and mobile chassis 1 x AGP wall saw/slot saw Model: CG150 Power: 2,500 W Connection: 220–240 V / 50–60 Hz Speed: 6,500 min⁻¹ Maximum grinding wheel diameter: 150 mm Axle hole: 22.2 mm / 7/8\" Maximum slot width: 47 mm Maximum cutting depth: 50 mm Features: Nilfisk vacuum cleaner with hose and accessories Mobile Floor Processing Machine  ...

Auction-ID: A1-50867-45

Equipped with machine clamp, lifting eye and various accessories in 2 red trays Auction-ID: A1-50393-192

Auction-ID: A1-50750-635

Equipped with: INCL ALL TOOLS, X/Y/Z range of 500/400/400 mm, table of approx. 680 × 380 mm, ISO 40 tool holder, spindle speed 20–3,150 rpm, feed range 1–3,000 mm/min, rapid traverse 6 m/min, swivelling milling head ±90°, main spindle motor 5 kW, total connected load approx. 12 kW Auction-ID: A1-47365-9

Voltage: 220 V, Frequency: 50/60 Hz, Motor power: 0,75 kW, Motor speed: 2850 rpm, Max. machinable profile height: 90 mm, Max. machinable profile width: 120 mm, Arbor diameter: Ø30 mm, Max. blade width: Ø140 mm. Auction-ID: A1-50595-8

Power supply: 380V, 3 ph, 50 Hz, Total electrical power: 1.1 kW, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 15350 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 115 mm, Max. machinable profile width: 110 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-43

Mecanumeric Normaprofil T2515 CNC portal milling, year of construction 2009. Machine suitable for processing plastics, composites, wood, resins and non-ferrous metals such as aluminum. Equipped with a vacuum clamping table, automatic tool changer, CNC control and extraction connection. The machine has a gantry construction and is designed for processing large workpieces. The T2515 model has a working range of approximately 3,100 × 2,100 × 870 mm. The manual control and head changer on the right side are defective and need to be checked. ATTENTION The machine must be disassembled by the buyer himself. Auction-ID: A3-46133-34030

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 0.75 kW, Copy router spindle motor: 0.75kW / 220 V / 3 ph / 50 Hz, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 14000 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 130 mm, Max. machinable profile width: 130 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-20

2 router cutters, each with an 8 mm cutting diameter and an 8 mm shank diameter, Motor power: 1,1 kW + 1,1 kW, Motor speed: 12000 rpm, Power supply: 380 Vac - 3 phases, Air consumption: 8 l/min. Auction-ID: A1-50595-30

Electrical supply: 220Vac/50Hz, Motor power: 0.85kW, Motor speed: 32000 rpm, Profile routing height: min. 40mm, max. 100mm, Cutter diameter: 8mm/5mm/80mm Auction-ID: A1-50595-5

Power supply: 380V, 3 ph, 50 Hz, Electrical power: 0,75 kW, Copy router spindle motor: 0,75 kW / 380 V / 3 ph / 50 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm, Copy routing capacity: x: 260mm / y: 105 mm / z: 90mm, Router cutter dimensions: Length: 80-120 mm / Diameter: Ø8mm. Auction-ID: A1-50595-15