Ref.nr 00912 機器ギアホブマシンの名称 この機械は円筒歯車の経済的な生産に適しています そしてギアは個別および量産で生産されました。堅 な設計と高精度のおかげで、PFAUTERは今なお 工具およびギアボックスの構造 製造元:Pfauter モデルP160HI 1970年建造 技術データ: ホイール直径:最大160 mm ホイール幅:最大355 mm モジュール範囲:0.5 – 4.5 ミリングカッター直径:最大115 mm ミリングカッターの長さ:最大105 mm フライスヘッドスイベル範囲:120 回転数:400rpm 中心幅:410 mm 機械寸法(L x W x H):約2,000 x 1,500 x 2,000 mm 条件は技術的には問題ありません。 現在は倉庫で解体された状態で覆われています 必要に応じて、売り手の同意があれば証明すること ...
spindle taper: 2 x SK 40 forward bearing diameter: 110 mmmilling head speed: 100 - 4500 U/minmilling drive: 5,1 kWworkpiece length - max.: 830 mmworkpiece dia. with double equipment: max. 135 mmtaper diameter: 78 g6 mmcentre height: 260 mmturning speed range - stepless: max. 15 U/mindistance of spindles: 135 mmspindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mmFeed speed: max. 6 m/min.surface area: 200 x 1750 mm: tool post (Z-axis): stroke of tool slide: 120 mmFeed speed: max. 2 m/min.column movement: 200 mm: tail stock: tailstock quill stroke: 100 mmmorse taper: 3 MKcentre height: 260 mmaxial distance of the quills: 135 mmpassage of steadyrest: 40 - 80 mmcontrol: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 twith SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolantThe data for this ...
max. workpiece diameter: 500 mmthreading length: 5000 mmmax. module: 10 min. module: 2 workpiece dia. over saddle: 250 mmcenter height over bed: 260 mmworkpiece dia. over bed: 500 mmworkpiece spindle bore: 102 mmthread pitch: 1 - 800 mmspeed of workpiece (milling): 0,0034 - 2,65 U/minfeeds - longitudinal: 0,256 - 195 mm/minfeeds - rolls: 0,0256 - 5,17 mm/WUhob turning speeds: 45 - 900 U/minelectrics - voltage/frequency: 380 / 50 V/Hztotal power requirement: 8,5 kWweight of the machine ca.: 6,6 tdimensions of the machine ca.: 7,0 x 1,7 x 1,6 mThread-, Worm-,gear shafts- and Spline Milling Machine with :equipped with:- Thread Milling Head ApGs- Counter Stay- 1 Bush Rest- 2 Steadies- Cabinet with change GearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 10 min. module: 1 workpiece dia. over saddle: 250 mmspindle bore of workspindle: 102 mmquill stroke: 100 mmworkpiece turning speeds: 0,0032 - 2,6 U/minfeeds - rolls: 0,027 - 5,66 mm/WUfeeds - longitudinal: 0,3 - 198 mm/minmain drive: 4 kWswivel angle for work spindle: 90/120 °diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/mintotal power requirement: 9,5 kWweight of the machine ca.: 4,2 tMachine equiped with:- Heavy Duty Hob Head ApFw- change gears- Milling Head ApFF- Single Indexing Device ETE- Bush Rest- Coolant TankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
