377 HOMAG вживана машина для продажу

Manufacturer: Homag Eltec , Model: Convertierungskarte CPU30/16 auf 4 X RS, Serial number: 4-086-05-0241,

Manufacturer: Homag Ständer ohne Anbauaggregate , Spare part from machine: Homag ,

Manufacturer: Homag Eltec Steuerkarte, Type: Hmag-2/mit ACR 1 Ausgang, Model: CPU 30 E16-103 4 MB 25 Mhz ohne Grafik,

Manufacturer: Homag, Type: FL 62/25, Year: 1988, Maschinensteuerung: Homag, Min.-max. workpiece length in mm: 250-1500, Min.-max. workpiece height in mm: 3-80, Cam distance mm: 900, Feeding speed min-max m/min: 5-40, Feed stepless: yes, Min-max protrusion of workpiece mm: 30, verängerte Kette mm: 900, Nockenaushebung: no, gesteuerte Fräsaggregate: 2, Scoring saw controlled: yes, 1st milling unit kW / rpm: 4,5/5890, 2nd milling unit kW / rpm: 4,5/5890, Year :1988

Hersteller : Homag Floppy, Spare part from machine: Einschub Floppy, Type: HD SCSI 10TE CPU 30, Serial number: 2-083-03-0045,

Hersteller : Homag Ausgangskarte, Type: HO0028895, Serial number: 2083015408,

Manufacturer: Homag Synchron Aggregateverstellspindel, Gear: 1512-2-8213 AB04J22.04, Gear: 1512-2-8213 AB04J22.04,

Hersteller : Homag Ausgangskarte 16 X 24 Volt, Spare part from machine: Kantenmaschine, Type: Homatic, Serial number: 2083015408,

Manufacturer : Homag Axle Card, Control: Flex Edge Sequence, Serial Number: 2-083-02-7012,

Manufacturer: Homag, Type: F5, Model: 15.F5.CBE-YA00, Serial number: 4-008-39-1121 V3.2,

Manufacturer: Eltec Homag, Type: Homatic, Model: Seco 6xRS232 VME Bus IRQ2, Serial number: 2-083-03-0202,

Manufacturer: Homag VME Interfacekarte, Type: Homatic, Serial number: 2-083-01-5423, Systemconfiguration: 2-083-01-5093, Serial number: f.HC010 Rev.4,

Manufacturer: ELTEC Homag IPC-2, Type: Homatic, Model: Netzwerkkarte, Serial number: 2-083-03-0099, Systemconfiguration: IPCA-200/1, Serial number: Traegerkarte,

Manufacturer: Homag CPU SPS-II, Type: Homatic, Model: PC-Controller, Serial number: 2-083-01-5053,

Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,

Manufacturer: Homag CPU SPS-II, Type: 1 MB RAM und PC Cobtroller, Serial number: 2-083-01-5043, Year: 93, Year :93

Manufacturer: Homag, Type: Homatic, Model: Eingangskarte 3224 Volt, Serial number: 2-083-01-5105, Year: 93, Year :93

Manufacturer: Homag CPU, Type: CPU HC020 SPS II, Serial number: 2-083-01-50-60, Systemconfiguration: V:4.66a,

Manufacturer: Homag Ausgangskarte 24 Volt, Type: Homatic, Model: Ausgangskarte 16 24 Volt, Serial number: 2-083-01-5408,

Manufacturer: Homag CPU SPS CPU, Type: Homatic, Serial number: 2-083-01-5057, Systemconfiguration: 2-083-01-5020 REV02, Year: 11/94, Year :11/94

Manufacturer: KEB Homag Umrichter, Serial number: 07.F0.R01-1228, was installed in machine: Homag Maschine, Production number: 95150305/129518, Frequency converter: yes, Power Output: 750, FREE TEXT: 750 W 2/4 50/60 Hz,

Manufacturer: Baumüller, Type: BUS 3-15/30-30-004, Serial number: 95307404 C,

Manufacturer: Homag, Type: BAZ 20 - 50 -12, Year: 1994, Control: Homatic, Working range X: 6000, Working range Y-axis: 1400, C axis: yes, Number of milling spindles: 1, Tool adaption system: HSK, Milling engine 1 hours power: 12, pm: 1800-24000, pm: 1800-24000, raster table: yes, Vacuum pumps m³/h: 2 X 100, Drill vertical: 14+7, Saw unit: yes, Edgebanding unit: yes, Verleimhöhe max.: 45, Vorbeschichtete Kante: no, Radial arm machine: yes, Year :1994

Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,

Manufacturer: Homag, Spare part from machine: Homag KL 79, Edge sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 450, Installation width mm: 350, Max. roller diameter: 80, Speed rpm: 1450, Pneumatically controlled: yes, pneumatisch gesteuert : yes, Sanding belt hight: 150, Sanding belt width max mm: 150 X 2100, Sanding belt length max mm: 2100, Main engine kW: 0,5, 2 belt speeds: 1, Belt clamping pneumatically: yes, Oscillation: yes,

Manufacturer: Homag, Type: Rechnerkarte, Model: CPU-Karte 70 BO 10 MHz 2 RAM, Serial number: 4-086-05-194,

Manufacturer: Becker , Type: SV.5.430/2, Year: Turbine zum Kühlen von Transportkette, Control: A 1781760, Year :Turbine zum Kühlen von Transportkette

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002

Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996