Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,
Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002
Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996
Manufacturer: Homag Fräsständer Bündigfräsaggregat, Spare part from machine: KF Maschine, for right machine side: rechts, Number of motors: 2, kW-Leistung : 1,1, Drehzahlen U/min : 18000, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: no, kW-output 2: 1,1/300,
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,
Manufacturer: Homag Flachzieklinge, Type: Nachputzeinrichtung Leimfuge, Ausführung links: yes, Ausführung rechts: yes, Flachziehklinge: yes, Tracing by roller: yes, FREE TEXT: Beseitigung von Klebstoffresten im Bereich der Leimfuge. Abtastung von oben und unten. Werkstückdicke 7 - 60 mm,
Manufacturer: Homag Druckrollen, Type: Teile von KF Maschine, Year: 1996, FREITEXT1: EINZUGSVORRICHTUNG 10 ROLLEN HOCHKLAPPBAR mit schräggestellten angetriebenen Rollen versetzt. Min. Werkstücklänge 250 mm, Year :1996
Key data: 4200 mm, 1500 mm
Homag CNC BAZ，Optimat 232/40/K 电源控制PC85，木工，ATC 12折，许多配件，粘合单元，.. 2张可伸缩换片台，两部分夹持台，配备2个处理站用 摆锤分配，刃高最大65毫米，芯片和边角处理，钻头1 7轴，主轴14.5千瓦，转速24000,1分钟 包括许多配件 状况：拆
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22
Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW
Bridge type Capacity for all units: 3300 x 1100 mm (alternating: 2 x 1025 x 1100 mm) Capacity for routing with tooldiameter 25 mm: 1550 mm Workpiece thickness up to 300 mm (stroke Z-axis 600 mm) Speed in X and Y: 60 m/min, Z: 25 m/min, Vector: 85 m/min 6 Support rails with LED positioning indication Vacuum: 100/140 m3/h Controlls: Powercontrol PC85 Waste/chip removal belt in machine base Machine pneumatically prepared to take pneumatic clamps, 3 pcs clamps included Drilling unit V9/H4, 13 spindles, motor 2,2 kW Main spindle DRIVE5C+, 5-axis, 10 kW, HSKF63 taper, speed 1000 to 24000 r/min, tooldiameter up to 180 mm for routing, 350 mm for cutting 14-fold rotary toolchanger and pick-up place for a sawblade Woodwop software
Key data: 2 kW, 5000 kg, 14 kW
Homag SawTeq B-300 flexTec 与 Yaskawa D200 机器人 厂商： Homag 型号： B-300 flexTec/Profi HPP300/43/43/F 手机号： 0-240-69-1263 制造年份：2020 年 控制： CADMATIC 5 Ardis 数据控制 贴标机：印刷栏中的 Pica II 总连接负载：80A 锯、35A 碎纸机和 14A 机器人 切割长度： 4,300 mm 切割宽度/深度： 4,300 mm 主锯：13.5 KW 锯片突出 mm： 80 mm 锯料： 130 m/min 划线锯电机：2.2kW 压角装置：剑 凹槽：Nuttprogram 夹头：8，夹头 1：PowerConcept 程序小车馈送：无级 气垫设置：4 个，填充板之间 工作台尺寸：1 （1,760650） + 3 （2,170650） 毫米 机器的附加功能： 连接到存储系统 安川 DX200 机器人： 品牌： Yaskawa DX200 型号：Eres-MPL0300-E00 M-编号：201153 制造年份：2020 年 机器人系统：YASKAWA DX 200 ...
