二手
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
二手
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
二手
设备概述： - 工件支撑剪刀式设计，带滚轮支撑，可延伸1000 mm - 进料尺自动调节 - 固定挡块侧左侧 - 入口联锁气动控制 - 通过驱动复合三角带实现上压 - 电动高度调节 - 通过带橡胶支架的运输链的工件运输装置 - 脱模剂喷雾装置顶部/底部 - 关节铣削单元 2 x 3 kW - 涂胶部件 A20 带 2 个辊子，包括工件预热装置、带快速夹紧系统的快熔 应用单元、2 辊刀库、压力区 C（自动调节，带 1 个印辊和 6 个压紧辊） - 横切单元 HL84 0.8 kW，带自动装置。调整倒角/直角以及气动。调节齐平/ 突出盖 - 预铣刨单元 1.5 kW，气动。调整宾迪铣床/突起铣床 - 带自动的模具铣削单元FK11。从倒角到半径铣削的调整 - 型材拉丝刀片PN10（带气动。横向驱动调整） - 精加工骨料（带气动。横向 ...
