HM вживана машина для продажу

Frees blok; freesblok; freesmachine; uitwendige maat 150 mm; hoogte 70 mm; asgat 35 mm; v.v. wisselmessen

sheet width: 2100 mm plate thickness: 3.0 mm thickness at Niro-steel: 1.5 mm blade length: 2110 mm no. of strokes: 34 Hub/min back stop - adjustable: 1000 mm cutting angle: 1.5 ° work height max.: 880 mm Control: DIGI engine output: 6.25 kW weight: 2650 kg range L-W-H: 2750 x 2350 x 1550 mm Machine from a maintenance workshop maintained condition () Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit Adjustment range max. 1.000 mm Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual Machi ...

: gebraucht : 1999 : 8293 : prompt, Zwischenverkauf v : 27800 € : 1 : 2520 mm : 5 mm : 155 ° : 4+1,5 kW : 3950 mm : 830 mm : 1520 mm : 4975 kg min. Clamping width between upper and lower beam 60 mm Lifting height of upper beam 200 mm Height adjustment/transmitting of the lower beam 60 mm Height adjustment/transmitting of thebending beam 60 mm Bending angle / stepless 0-135° Extended bending angle 0-155° Bending speed 4,77 U/min Lifting and lowering speed of the upper beam 4,5 mm/s Working cycle 90° bending 10 s Motor upper beam 2,2 kW Motor bending beam 5,5 kW Foot pedal Flat rail 45°, Split goat foot rail Height 100 mm Length 2105 mm, Radius rail R 33 mm, Bending beam rail 20 mm, Attachment rail 15 mm, Attachment rail 35 mm, 20 Stk. Replacement break plates User manual in german with Declaration of conformity The data for this ad was created with ModulMWS - the software solution ...

Гідравлічне прес-гальмо зробити HM type JONO 20.075Машина -No: 1143, побудований в 2002 році Сила польоту: 75 тВт Довжина роботи: 2000 мм Довжина стільниці: 180 мм Швидкість роботи / вниз: 10 мм / s Швидкість роботи / висока: 19 мм / сГідравлічний двигун: 11 кВт Напруга: 3x400 VAC / 50 Гц + N + PEControl напруга: 24 VAC + 24 VDCMax. Тиск: 180 барОїл кількість: 125 л Вага: 5.5 tЕкстернальні розміри: 2340 x 2205 x 1965 ммЗ-Управління SIEMENS SIMATEC OP 7xa0xa0xa0 для X + Y- спільний інструмент для ніг рифу- Univ. die- Footswitchused, в дуже хорошому станіВикористання за запитом. Доста ...

sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

Ширина листа: 1020 мм товщина плити: 2,75 мм 400Н/мм² денний отвір: 45 мм вираючий кут макс.: 0 - 135 ваговик машини ca.: 285 кг

width of the strips: 150 mm band length: 2000 mm band speed: 34,0 mm/sek grinding width: 530 Plantisch mm table height: 475 - 1240 mm total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 115 kg range L-W-H: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 34,0 mm/sek grinding width: 530 Plantisch mm table height: 475 - 1240 mm total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 100 kg range L-W-H: 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction The data for  ...