HACO maquina usada para la venta

sheet width: 3050 mm plate thickness: 12.0 mm ST plate thickness: 8.0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0.5 - 3.0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Control: SP 8 total power requirement: 22.5 kW weight: 8500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 Pre-selection positioning from the backgauge Digital display of actual value Electro-hydraulic cutting angle adjustment with digital display programmable retraction from the backgauge Programmable cutting length limit Emergency switch - electro-motorized back gauge, on ball screws - manual cutting gap adjustment, adjustable from the rear - Finger protection at the front - 1x side stop .. 1.000 mm - Protective device behind the machine - rear sheet metal slide - 1x freely ...

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2600 mm stroke of upper beam: 120 mm throat: 250 mm dayligth: 325 mm working feed: 7.0 mm/sec return speed: 60.0 mm/sec : 300 bar Control: ATL 550 work height max.: 915 mm table width: 180 mm total power requirement: 7.5 kW weight: 8250 kg range L-W-H: 3500 x 1700 x 2380 mm Furnishing: - simple NC controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 Positioning of the back gauge (X) Positioning of the depth adjustment (Y1+Y2) Possibility of programming various programs Storage capacity max. 200 programs - max. 400 sets Swivel control panel, front left - electro-motorized, stepless depth adjustment (Y1+Y2 axis) - electro-motorized back gauge (X axis) 2x manually adjustable stop fingers - manual table crowning, including analogue value display - 1x split upper tool set - HAC ...

sheet width: 3050 mm plate thickness: 6,00 mm distance between columns: mm cutting angle: 0,5 - 3,0 ° drive motor: 11 kW down holder: 18 Stück total power requirement: kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: m • Automatic cutting angle adjustment • Automatic cutting gap adjustment • Cutting line lighting • Support arms • Knife with 4 cutting edges • Cutting length limitation • CNC back gauge 705mm adjustment range 705 mm • Angle stop • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensiones de la mesa: 120 cm x 80 cm altura del husillo adaptable: a mano diámetro del husillo: 50 mm motor: 5,5 kW guía ajustable manualmente

Capacity 3050 x 6 mm Adjustable backgauge

The machine is in good technical condition, it is possible to test it by agreement. Max. sheet length: 3000 mm Max. sheet thickness: 16 mm Weight approx.: 12000 kg Dimensions: 4200x1700x2300 mm

Haco TS 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 32 str/min Backgauge: 750 mm Electric motor (power): 7.5 kW Length: 3480 mm Depth: 1500 mm Height: 1800 mm Weight: 6,5 ton

Haco PPB 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Backgauge: manual Passage between uprights: 2550 mm Max stroke: 120 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 180 mm Locking speed: 60 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 11 kW Length: 3270 mm Depth: 1600 mm Height: 2500 mm Weight: 6,5 ton

This HACO ERM 36150 bending machine was made in the year 2014 and has 1962 hours. It is equipped with a CONTROLLER M8519T control unit. The machine has a pressing force of 150 kN. Robot can be purchased additionally for price upon request.

This HACO HSL 3013 Shearing machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO SP8 control unit. The machine has a cutting thickness of 13mm

This Haco TS 3012 Shearing machine was manufactured in the year 2004 in Belgium. It is equipped with HACO SP 8 control unit. The machine has a max cutting length of 3000 mm.

Hydraulic press brake: HACO type PPM 2075, date: 2006. Bending length: 2050 mm; Between columns: 1750 mm Loading: 200 mm, stroke 130 mm; Pressure: 75 t Conventionally controlled press, electronic readings, setting the stop and bending angle using buttons on the desktop. YX steered axes. Machine weight 4 tons. Drives 6.5 kW. Amada system tools - set - 4-slot matrix 60x60 mm + universal punch, bending C-section 10x10x10 mm. Full Operation and Maintenance Manual, BiHP position manual in Polish.

The machine has a quickly changing knife gap with sheet thickness reading and a constant knife angle. 9 kW motor. Weight 4.5 tons. Electric bumpers with reading, bumper departure 850 mm. Supports for supporting sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.

Reinforced version, for 3-shift work. CNC SC5 control. The machine automatically sets both the angle and the gap after entering the material thickness. The machine has a quickly changing gap between the knives with CNC-controlled sheet thickness reading, and a hydraulically variable knife angle in the range of 1-3 degrees. 7.5 kW motor. Weight 6 tons. Electric bumpers with CNC position reading and setting, bumper travel 1050 mm. The bumper has a retraction function. Supports to hold sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.

This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit.

This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of 3000 mm.

Hydraulic press brake: HACO type PPM 2075, rb: 1997. Bending length: 2100 mm; Between columns: 1750 mm Loading: 200 mm, stroke 130 mm; Pressure: 75 t CNC controlled press ATL 600. -Y-X controlled axes. Machine weight 4.4 t. Drives 7.5 kW. Tools -new - complete - 4 groove die 100x100 mm + punch. Full DTR, the instruction manual BiHP in Polish.

Prasa krawędziowa HACO 36-135 135 wyprodukowana w 1994 roku w Belgii. Parametry techniczne: -· Made by :- HACO, Belgium · Model :- PPH 36135 · Year Of Manufacturing: - 1994 · Capacity- 135 Ton · Maximum press force: 135 Ton · Maximum sheet metal length: 3600 mm · Controller: HACO ATL 550 · Bending speed: 10 mm/s · Approach speed: 100 mm/s · Return speed: 80 mm/s · Slider stroke: 200 mm · Reaction time: 75 ms · Distance between body walls: 3150 mm · Safety distance: 300 mm · Foot control · Motor power: 15 kW · Maximum operating pressure: 300 bar · Power supply: 380 V · weight of machine: approx. 8 Ton

Gilotyna do blachy HACO TS 3012 wyprodukowana w 1994 roku w Belgii. Parametry techniczne: -· Made by :- HACO, Belgium · Model :- TS3012 · Year Of Manufacturing: - 1994 · Maximum cutting length: 3050 mm · Maximum cutting thickness: 12 mm · Back gauge stroke: 1000 mm · Main motor power: 22 kW · Maximum operating pressure: 260 bar · Oil tank capacity: approx. 220 Liter · Power supply: 380 V; 50 Hz · Approx weight of machine : 8900 kg

Shear with a capacity of 3 mts x max. 12 mm of mild steel cutting thickness,

Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: HACO, hydraulic control block from press brake type PPES 30135 -Control valve: hy hydraulic ring WLL43G06P012KB4 / WEF42A06C1 -Lifting magnet: Magnet-Schulz G RF Y 045 F20 E11 -Individual components: Type/number see photos -Dimensions: 540/380/H400 mm -Total weight: 23 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: HACO, 2 pieces of hydraulic cylinder from press brake type PPES 30135 -Piston rod: Ø 160 mm -Stroke: 130mm -Price/tax: complete -Dimensions: 685/330/300 mm/piece -Weight: 168kg/piece

: 3050 mm : 06,0 mm : - : 0,5-3,0 : 1000 mm

: 3050 mm : 12,0 mm : - : 0,5-3,0 ° : 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Control card: from press brake HACO type PPES 30135 -Type: HACE 032 -Dimensions: 95/70/H50 mm -Weight: 0.1 kg.

Crowning for press brake, bending bench, die holder with displacement device -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: HACO, control panel with foot switch from press brake type PPES 30135 -Footswitch: Amber, with 2 pedals -Connections: see photos -Dimensions: 800/740/H1095 mm -Weight: 25 kg

Stop for press brakes, bending benches, guillotine shears... -Manufacturer: HACO, stop with height adjustment for press brake type PPES 30135 -Stop length: 2220 mm -Travel: 715 mm -Individual components: see photos -Transport dimensions: 2440/930/H480 mm -Weight 380 kg

sell angle notcher HACO VARI 220X220 variable angle and stainless steel blades like new

electrical network - 380 V frequency – 50 Hz main fuse – 20A main engine directly on line main engine power – 7.5 kW motor with rear pressure gauge – AC 0.37 KW control: SP8 Cutting length - 3100 mm Thickness of cut sheet metal in grade S355 - 6 mm, stainless steel sheet - 4 mm.