We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Модель
(Виробник: HAAS)
бувша у використанні
Description: Serial number 1147287 Including the tool holders and tools located on the tool changer, as well as a measuring probe Attention: The tool holders on the shelf and the machine vices attached to the table are not included in the scope of delivery! z-motion: 635 mm, x-motion: 1,270 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1320x480 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 8,000 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm
бувша у використанні
Description: Serial number 24636 , Including the tool holders and tools located on the tool changer. Attention, the machine vices attached to the table are not included in the scope of delivery! z-motion: 635 mm, max. workpiece weight between centers: 1,588 kg, x-motion: 1,016 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1219x457 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 7,500 rpm, feed range: 0 -16500 mm/min, rapid motion: 25,4 m/min, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm
бувша у використанні
Description: Serial number 28133 , Diameter of the rotary table 250 mm ,  , Including fully integrated swivel rotary table, as well as the tool holders and tools located on the tool changer  , z-motion: 635 mm, x-motion: 1,270 mm, y-motion: 508 mm, control: HAAS, table surface area l x w : 1310x455 mm, taper: BT 40, toolchanger positions: 20, turning speed range: 8,000 rpm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 2,800 x 3,000 mm
бувша у використанні
X axis 762 mm Y axis 406 mm Z axis 508 mm Distance from spindle face to table 610 mm Distance from spindle face to table 102 mm Spindle METRIC Max. power 22.4 kW Max. speed 12000 rpm Max. Torque 122.0 Nm Drive system Inline Direct-Drive Cone SK40 Bearing lubrication Air / Oil Injection Cooling Liquid Cooled Table METRIC Length 914 mm Width 356 mm T-slot width 16.00 mm Distance of T-slots from the centre 125 mm Number of standard T-slots 3 Max. table load (evenly distributed) 1500 lb 680 kg Tool Changer METRIC Type SMTC Capacity 30+1 Max. tool diameter (full) 64 mm Max. tool diameter (next empty) 127 mm Max. tool length (from calibrated line) 279 mm Max. tool weight 5.4 kg.
бувша у використанні
The machine is in good technical condition, can be tested under power. In operation 4/2007, spindle clearance 78mm, tool head 12pcs VDI40, driven tools, chuck 254mm, hydraulic tailstock Max. turning length: 660 mm Regular service , new spindle belts. The machine has a Samsys multisaver 5.55 electro bar feeder. accessories : tool holders, driven tools, jaws. The machine is in good technical condition, can be tested under power. The machine comes with Samsys multisaver 5.55 electro bar feeder. accessories : tool holders, driven tools, jaws.
бувша у використанні
The machine is in good technical condition, can be tested under power. - max. turning diameter 305 mm (for standard revolver) - max. turning length 533 mm - Turning diameter above bearing 806 mm - Turning diameter above cross slide 527 mm - X/Z axis travel - 236 / 533 mm - X/Y/Z axis speeds - 12.0/12.0/24.0 m/min - spindle size A2-6 Bmfoinv8kyi - max. power 22.4 kW, Vector Drive spindle drive - max. torque 407 Nm - max. spindle speed 3.400 /min - spindle clearance for bar material 76 mm - automatic hydraulic chuck 254 mm - 12 position head BMT65 - Option tool drive and C-axis spindle Y-axis, C-axis and rotary tool drive - Y-axis +/- 50.8 mm - Max. speed of driven tools 4,000/min (option 6,000 rpm) - drive all positions of BMT65 turret head - max. power - 9 kW - max. torque - 32 Nm - C axis for main spindle - 208 l coolant tank with pump - electrical connection 3x400V/50HZ, 28kVA - Machin ...
бувша у використанні
Table length: 630 mm Table width: 500 mm Longitudinal X: 762 mm Cross Y: 508 mm Vertical Z: 508 mm Positions ATC: 30 Positions APC: 0 CNC Brand: Haas 5-axis CNC machine (VMC)Haas - UMC-750 MACH-ID 8501 Make: Haas Type: UMC-750 Control: HAAS Year: 2019 Length:3048mm Width:4115mm Height:2870mm Weight:8400kg
бувша у використанні
This 3-axis vertical machining centre was manufactured in 2018. The HAAS VF-4SS-EU features cutting-edge options like a spindle speed of up to 12,000 rpm and a robust table supporting loads up to 794 kg. Precision is maintained with linear rolling prestressed axle guides and an ISO40 / DIN69871/A drive type, enhancing the reliability of production processes. The CNC control system, compatible with FANUC, offers streamlined operation, which makes buy this HAAS VF-4SS-EU vertical machining centre a strategic addition to any manufacturing fleet. Contact us for more information.
бувша у використанні
Description: Capacities , Chuck Size 305 mm , Max Cutting Diameter ,533 mm , Max Cutting Length 660 mm , Std. Bar Capacity 102 mm , Spindle Nose A2-8 , Spindle Bore Ø117,3 , Spindle , Max Speed 3200 rpm , Max Motor Rating 29,8 kW , Max Torque 576 Nm @ 325 rpm , Drive System belt drive , Swing Diameter , Over Front Apron 806 mm , Over Cross Slide 527 mm , Over Tailstock 584 mm , Travels & Feedrates X Axis 318 mm , Y Axis -- Z Axis 660 mm , X-Axis Max Thrust 18 238 N , Y-Axis Max Thrust -- Z-Axis Max Thrust 22 686 N , X-Axis Rapids 24,0 m/min , Y-Axis Rapids -- , Z-Axis Rapids 24,0 m/min , Operating Dimensions ST-35 Max Operating Height 2108 mm Max Operating Width 4 521 mm Max Operating Depth 3 048 mm serial number: 3,113,825, x-motion: 318 mm, z-motion: ...
бувша у використанні
Ми продаємо токарний центр Haas ST-20 від імені замовника. Машина була встановлена і ніколи не використовувалася продуктивно., - Параметри управління, - Пакет опцій, - Витрата теплоносія під високим тиском, - Комплектація аксесуарі
бувша у використанні
Haas MDC 500 Double Pallet Vertical Machining Center Double pallet X 508 mm Y 355.6 mm Z 508 mm Power 14.9 kW RPM 8,000 RPM # ATC 24 Taper CAT-40 Table-W 304.8 mm Table-L 508 mm # Axis 3
бувша у використанні
Description: Serial Number 4362 Table Dimensions: 660x356 mm Control HAAS Travels: X:508 mm Y: 406 mm Z: 508 mm Speed: 7500rpm ATC 20 stations Taper: BT40 ENCODER NEED TO BE CHECKED  , weight approx.: 3,700 kg, Approx. Onsite Dimension. (l x w x h): 2,795 x 2,357 x 2,642 mm
бувша у використанні
Description: Serial number 162331 Including one additional 4-jaw chuck, one tailstock and clamping device weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm
бувша у використанні
This HAAS ST-15 lathe was manufactured in 2019. It is equipped with a hydraulic chuck sizing 210 mm and offers spindle speeds up to 4000 rpm, with driven tool speeds reaching 6000 rpm. The machine includes a 12-position BOT/VDI type tool head and features axis movements with X at 100 mm and Z at 406 mm. For more information about this lathe, please reach out to us.
бувша у використанні
This lathe was manufactured in 2014. The HAAS ST-30 features a robust Chuck size of 254 mm, accommodating a maximum part swing of 533 mm and a turning length of up to 826 mm. Equipped with a 12-station turret and a tailstock, it enhances productivity for complex machining tasks. Its feed rates, with rapids on both X and Z axes at 24.0 m/min, coupled with a max spindle speed of 3400 rpm, ensure efficient machining cycles. The HAAS ST-30 the HAAS lathe we have for sale includes additional accessories like a HAAS SERVO BAR 3000 bar feeder and part catcher, greatly streamlining the manufacturing process. Contact us for more information about this machine.
бувша у використанні
This 4-axis vertical machining centre was manufactured in 2018. Equipped with a controlled 4th axis (HRT300), it boasts a main spindle speed of 15000 rpm and 30 tool slots for versatile operations. Renishaw tool setting ensures precision, while internal cooling via the main spindle enhances efficiency. With 22856 total running hours, this HAAS VF-3SS is meticulously maintained, resembling a new machine. Consider this Haas VF-3SS vertical machining center for a seamless production experience. For further information, please contact us.
бувша у використанні
Ми продаємо надшвидкісний 5-осьовий вертикальний обробний центр з ЧПУ UMC-750SS від імені замовника. Верстат використовується менше 300 годин через відсутність замовлень і має наступні опції:, - Варіанти управління, - Шпиндель зі швидкістю 15 000 об/хв, - Бічно встановлений високошвидкісний пристрій зміни інструменту з 50+1 положенням магазину, - Потік охолоджуючої рідини через шпиндель, - додаткові аксесуар
бувша у використанні
This lathe machine was manufactured in 2015. Equipped with a D160 Hydraulic chuck and a D45mm main spindle bore, it boasts reliability and precision. Featuring a 12-piece turret head, VDI-40, and hydraulic programmable tailstock, it ensures versatile machining operations. With 42597 hours of power on and immediate availability, this HAAS ST-10 presents an opportunity for efficient production. For further details, contact us.
бувша у використанні
This 6-Axis lathe was manufactured in 2004 and features a HAAS SL-30TCE model. With a robust 12-position tool turret and 254mm chuck, it offers precision in turning with a maximum diameter of 432mm and length of 864mm. Boasting rapid traverse on X and Z axes at 18m/min, it ensures efficient operations. Equipped with brushless motors and a compact design, its an optimal choice for machining tasks. Interested in optimizing your workshop? Inquire for further details on this HAAS SL-30TCE lathe.
бувша у використанні
This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15 LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information.
бувша у використанні
This lathe manufactured in 2022 features key upgrades for precision and efficiency. It includes an Automatic Tool Presetter for easy setup, a Belt-Type Chip Conveyor for enhanced productivity, and a High-Pressure Coolant System to optimize cutting conditions. Additional amenities like the WiFi Camera and the Remote Jog Handle with Touchscreen enhance operational control and monitoring. The HAAS ST-20 machine we have for sale is designed for robust performance in demanding environments. For more details, please contact us today.
бувша у використанні
This 5-Axis vertical machine center was manufactured in 2022 and features high-performance specs like a 15,000-rpm spindle, high-speed side-mount tool changer for 50+1 tools, and through-spindle coolant for efficient cutting. Additional highlights include a WiFi camera for remote monitoring and a programmable coolant nozzle for precision. The HAAS UMC-750SS ensures enhanced productivity and reliability. For more details, contact us today.
бувша у використанні
We hereby offer this used Haas VM 2 vertical machining center from 2014, located in The Netherlands. This industrial powerhouse, featuring a cutting-edge Haas control unit, stands as a testament to efficiency and accuracy in metal machining. With a generous working area of 914 x 457 mm, the Haas VM 2 is tailored for diverse machining tasks. The robust 12000 rpm spindle speed, coupled with a formidable 22.4 kW motor power, ensures swift and precise machining operations. Technical specifications: Control unit: Haas X-Axis travel: 762 mm Y-Axis travel: 508 mm Z-Axis travel: 508 mm Rapids on X-Y-Z axis: 18 - 18 - 18 m/min Table length: 914 mm Table width: 457 mm Table load: 1361 kg Spindle nose to table: 610 mm Spindle speed: 12000 rpm Spindle taper: CT40 | BT40 | HSK-A63 Motor power: 22.4 kW Tool changer: 40+1 tools Dimensions: Length: 2600 mm Width: 2700 mm Height: 26 ...
бувша у використанні
This 4-Axis lathe was manufactured in 2014, featuring a D210 hydraulic chuck and a D56mm main spindle bore. It includes a 12 pcs turret head compatible with VDI-40 tooling and driven tools for enhanced flexibility. The programmable hydraulic tailstock and C-axis with hydraulic brake ensure precision. Noteworthy is the machineâs low cycle time of 38860 hrs and tool feed time of 36366 hrs, indicating significant remaining operational potential. For those interested in robust machining solutions, the HAAS ST-20Y we have for sale is a strong candidate. Contact us for more details about this HAAS ST-20Y.
бувша у використанні
бувша у використанні
This HAAS ST-15Y Lathe was manufactured in the year 2019 in the United States and has 25996 operating hours. It is equipped with a Haas control unit. The machine disposes of a D65mm spindle bore, a D210 Hydraulic chuck, a Hydraulic programmable tailstock, a C-axis with hydraulic brake and a chip conveyor. It is well maintained and in mint condition.
бувша у використанні
This HAAS ST-10 Lathe was manufactured in the year 2017 in United Sates and has 8623 production hours. It is equipped with a HAAS control unit and has 2 axis. The machine has a spindle speed of 8000 rpm.
бувша у використанні
This HAAS ST-20Y Lathe was manufactured in the year 2022 in the United States and has 3553 operating hours. It is equipped with a Haas control unit. The machine disposes of a D210 hydraulic chuck, a hydraulic programmable tailstock and a chip conveyor. Contact us anytime for further questions.
бувша у використанні
This HAAS EC-400 Machining centers (horizontal) machine was manufactured in 2022. It comes with two pallets, each measuring 400x400 mm, equipped with M12 threaded holes and centering holes. Its main spindle speed is 15000 rpm. It includes 50 tool holders, Renishaw tool setting and zeroing system, internal cooling via the main spindle, chip conveyor, and internal camera system. Contact us anytime for further information.
бувша у використанні
This HAAS EC-400 Machining center (horizontal) machine was manufactured in 2020. It includes two 400x400 pallets with M12 threads and centering holes, a main spindle speed of 15000 rpm, and 50 tool slots. Additionally, it features a Renishaw tool setting and zeroing system, internal cooling through the main spindle, a chip conveyor, and an internal camera system. Contact us anytime for further information.