GOETZINGER бывшая в употреблении машина на продажу

НОВАЯ ПОДЕРЖАННАЯ Компактная - ПЛОСКАЯ - ШИПОВАЯ линия Производитель: GÖTZINGER Год постройки 2019 макс. 140 мм x 80 мм мин. 20 мм x 30 мм Собран и сразу доступен Фрезерование, склеивание, прессование, укупорка Продажа в проверенном виде без гарантии и поручительства Самостоятельный демонтаж с полной поддержкой Для производства всех молдингов внутри и снаружи, полов и многого другого. Все построено в линию, длиной около 35 м. Клей однокомпонентный полиуретановый водостойкий Техническое описан ...

Бренд: Гётцингер Тип:

Description: X= 2500 mm Y= 360 mm Z= 180 mm (depending on tool length) Approx. Onsite Dimension. (l x w x h): 2,800 x 800 x 1,400 mm, weight approx.: 750 kg

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 Götzinger Power Drill drilling and milling center ------------------------------------------------- Machine is FACTORY TESTED by Götzinger before delivery. Depending on the type and version, you can use the Götzinger PowerDrill to: - Drill on the front and long sides - Doweling of house doors, timbers, brackets - The drilling patterns are freely programmable - You can: drill handle olives and corner bearings, with quick-change ones Multi-spindle drilling heads - You can: mill lock cases, handles and PZ as well as 3D hinges drill - The machine has a horizontal and a vertical milling unit - A simple control allows you to create drilling and milling programs, save and access again and again Stable base frame, covered with sheet metal Table ...

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 0 boring of olive 1=yes, 0=no: 1 0 Dimensions (L/W/H): 3600x800x1900 mm weight: ca. 120 kg Olive drilling machine type: OBM-Plus Special version (corner and scissor bearing + handle olive drilling) --------------------------------- Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/380V, 50Hz, 1.1KW Machine complete, but without drilling tools Drill head BKF 3, 21.5mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops set to a constant grip size (for handle olives) Drill head BKF 2 can be changed quickly 2 spindles for corner bearings drill on the loose frame part complete with stop system with 2 folding stops Drill co ...

Pot hinge drilling machine, fitting drilling machine -Number of drills: 8 pieces -Brill: in opposite directions - Right-hand drill holder: O 10 mm - Drill holder on the left: O 11 mm -Drawing drilling pattern with the photos -Weight: 150 kg

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja/Yes boring of olive 1=yes, 0=no: 1 ja/yes Corner bearing and olive drilling machine Götzinger OBM-PLUS Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable backstop 2 swiveling workpiece supports 1 machine stand complete with shelf Left and right roller conveyor each 1.5 m, 200 mm wide, 4 rollers each 220/380V, 50Hz, 1.1KW 1 drill head BKF 3, 21.5 mm pitch, quick-changeable Drill mount M 10, cyl. right/left complete with stop system 2200 mm long Total length with 12 folding stops adjusted to a constant grip dimension (olive drilling) Consisting of: 2 dowel drills d=10 mm 1 artificial drill d=25 mm 1 drill head BKF 2/3 quick-change drill 2/3 spindles for corner bearing on the loose frame part. Hardware Roto- alternative on request Complete with stop system with 2 foldi ...

Manual hand unit: Nein J/N Automatic for single pieces: Ja J/N Automatic for frames: Nein J/N Clip set 351 on the loose item ------------------------------------ Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow -------------------------------------- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm -------------------------------------- Total price of the machine ex works: on request! Frei ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Hori ...

Дверная петля сверлильный станок изготовителя GÖTZINGER типа ABMMachine -No: 833 построен в 2000 годуТехнические характеристики: Количество сверл: 8 штукПравной диаметр держателя для оснастки: 10 ммОдневый диаметр держателя для гриля: 11 ммВес прибл.: 150 кг, в хорошем состоянииЦена по запросу. Доставка: со склада или без места погрузки грузовика. Оплата: нетто при поглощении или по предварительной записи. Технические данные не являются обязательными. Ошибки исключены. Мы будем рады, если Вам понравится � ...

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger Dübelleim- und Einpressmaschine BLE Grundgestell in stabiler Schweisskonstruktion, mit Blech verkleidet Tischauflage ca. 200 x 1160 mm Pos. 1 1 Leimstation Vollstrahlventil Leimmenge exakt einstellbar Leimpistole für Gegenlochbeleimung Pos. 2 1 Leimpumpe aus Edelstahl, Hochdruckpumpe und Leimschlauch Pos. 3 1 Einpressstation mit Dübelvereinzelung und Einpresszylinder Pos. 4 1 Schwingförderer für Dübel d 8 x 60 mm mit Zuführschlauch in das Einpressaggregat Pos. 5 1 Bearbeitungsaggregat mit Kreuztisch, Linearführung und 3-Achs-Motore X = 200 mm Bearbeitungsbreite Y = 120 mm Bearbeitungshöhe Pos. 6 1 Positioniersteuerung Touchpanel Wahlschalter für verschiedene Bearbeitungen: nur bohren nur leimen - einpressen bohren - leimen - einpressen Preis der Pos. 1 bis einsc ...

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: 140 mm Working height from to: 20,80 mm : endlos mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...