双轴液压撕碎机，装载料斗，坚固的碳钢支撑结构， 碎表面 1.300 x 960 毫米，2 个反向旋转钢轴，75 毫米厚的刀具，2 个挂钩，最大转速 18 rpm，行星齿轮箱，液压马达 90 kw （120Hp） 400 V/50 Hz（可安装 75 kw 驱动器），液压动力装置，400 升油箱， 自动过载反转，可编程反向循环次数，带电子系统的 制面板，可设置最大反转次数，冷却风扇，配有电 图纸，用户手册，符合 CE 标准，可增加负
双轴液压撕碎机，撕碎表面 1.000 x 850 毫米 ca，包括装载料斗，坚固的碳钢支撑结构，2 个反向旋转钢轴，n.20 x 50 毫米厚的刀具（或定制），液压马达 37 kw，400 V/50 Hz，液压动力装置，200 升油箱，控制面板，自动过载反转，可编程反向循环 数，配有电气图纸， 用户手册，符合 CE 标准，可添加带磁选机的拉出带，宽度：1.000 毫米，可用性：约 150 天，条件：翻新，功率：37 kw
传送带，用于废料等，坚固的钢结构，以工匠般的方 建造，意大利品质和组件，可以衬有 PVC、橡胶或百叶窗型杆，可以为金属探测器准备和安 ，并配有带式金属分离器，尺寸和特性根据项目定 ，只需填写以下数据即可： - 要运输的材料（照片欣赏）， - 数量（吨/小时）， - 所需工作宽度， - 总长度， - 水平长度， - 对角线长度， - 卸料点高度， - 如果准备金
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with horizontal conveying screw to on ...
提升螺旋钻， 用于研磨料，箱体外壳 400 毫米外，内螺旋 300 毫米，带防尘轴承，长度 8.5 米，收集料斗 900 x 500 毫米（或定制），排气口，每 3 米中间支架，邦飞利齿轮箱，5.5 kw 驱动装置，配有用户手册。CE 合规性和 el，.图纸，安装功率 - 工作中使用的功率：约 60-65% ： 5.5，可用性：确认后 4 周，条件：新机器，类型：收集和提升材
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...
DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...
半自动，不停机换网装置，筛网 30 至 400 毫米。可以安装任何类型的单螺杆或双螺杆挤出机 在支撑轮式推车上用坚固的钢制成，便于运输 我们在塑料挤出方面的长期经验，智能结构 配有用于温度和压力管理的控制面板 液压动力单元 在切粒机和挤出机的给定设计上提供连接法兰 带 2 个滑动断路器的单抽屉（也可提供双/4 个断路器）， 当要求报价时，请详细说明：， - 挤出机类型， - 螺杆直径， - 生产
造粒机水环，采用一流的材料和组件制成，是挤出生 线的可靠配件，紧凑且经济，由坚固的不锈钢制成 喷嘴有自调节刀，磨损少，效率提高，再循环水泵带 水过滤装置，可重复使用，包括热交换装置。您可以 其与您的工厂冷却装置连接，带有西门子触摸屏的 柜用于设置所有参数，调制解调器用于远程协助，适 用于各种塑料和色母粒，尺寸定制为
WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5, ...
WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...
WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...
用于塑料废料的沉浮分离罐，采用厚实的 AISI 304 不锈钢制成，带有增强板和型材，尺寸 5.0 X 1.5 公吨，用于切碎塑料的进料斗，法兰进/出水口，水龙 头和球阀，n.2 x 1.5 kw.用于物料移动的驱动辊，带有邦飞利齿轮箱，底部 n.1 链式输送机，用于提取沉没的物料， N.1 对角不锈钢链式输送机，用于提取漂浮物料的收集排 螺旋，尺寸：5.0 x 2.4 公吨，产能：800-1.500 kg/h，具体取决于材
风干隧道， 用于股线，尺寸 2.000 x 300 毫米（或定制），底部鼓风机，带有 2 个输送机，通过狭缝输送空气，AISI304不锈钢制
TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...
立式搅拌机，容量 5.000 升 总高度约 5.000 毫米 最大直径 1,850 毫米。采用涂漆电焊碳钢制成。内螺旋直径 280 毫米。带安全栅和取样挡板的装载料斗，600 x 500 mm。滑轮和皮带传动装置，由卡托机保护 带安全限制的检查门，清洁锥体底部的铰链门，用于 全卸料，带安全开口 侧面卸料管到大袋，带阀门，离地面1.000毫米 底部卸料管螺旋桨类型 最大液位指示器 自动润滑套件 7.5 kw 电动机 带控制装
容量 3.0 m3 总高度约 4.000 mm 最大直径 1.600 mm。采用涂漆电焊碳钢制成。内螺旋直径 280 毫米。带安全栅和取样百叶窗的装载斗，900 x 740 h 830 滑轮和皮带传动装置，由推车保护 带安全限制的检查门，清洁锥体底部的铰链门，用于 全卸料，带安全开口 侧面卸料管到大袋，带阀门，离地面1.000毫米 底部卸料管螺旋桨类型 最大液位指示器 自动润滑套件 5.5 kw电动机 配有控制面板。
立式搅拌机 14.000 升，总高度约 5.500 毫米，从顶部装载，带旋风分离器和集尘器，最大直 2.380 毫米，由涂漆电焊碳钢制成，内部螺旋直径 350 毫米，带安全栅和百叶窗的采样料斗，600×500 毫米，皮带轮和皮带传动，由卡特保护，带安全限制 检查门，清洁铰链门，锥体底部用于完全卸料，， 带安全开口， 带阀的吨袋侧卸料管， 桨式最大液位指示器， 自动润滑套件， 11 kw 电动机， 带控制装
用于塑料废料的沉浮分离罐， 采用厚实的 AISI 304 不锈钢制成，带有加固板和型材，尺寸 5.0 X 2.4 公吨，用于切碎塑料的进料斗，法兰进水口/出水口， 水龙头和球阀，n.2 x 1.5 kw.用于物料移动的驱动辊筒，带有邦飞利齿轮箱，底 n.1 链式输送机用于提取沉没的材料， N.1 对角不锈钢链式输送机，用于提取漂浮物料的收集排 螺旋，尺寸：5.0 x 2.4 公吨，产能：800-1.500 kg/h，具体取决于材
立式搅拌机，容量8 m3，总高度约4.500毫米，包括传动组，最大2.200毫米， 涂漆的电焊碳钢制成，内部螺旋钻直径350毫米。下 装载料斗，带安全栅和取样闸门，配有防尘罩，毫米 600x500，皮带轮和皮带传动，由卡特保护，带安全限制 的检查门，清洁锥体底部的铰链门，用于完全卸料。 带安全开口，侧面卸料管到大袋，阀门距离地面 2.500 毫米，最大电量指示器，桨式，自动润滑套件
VIBRATING SCREN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good ...
PLC 控制混合、袋装和称重系统，用于塑料颗粒，为项目 制，包括 [立式搅拌机]（.germanplast.eu/it/annunci/4309783-vertical-mixers -from-5-to-30-m3）、缓冲器、带偏转器的气动系统、旋风 分离器等，带或不带装载螺杆、装载单元、数字显示 视觉和声音警报，全部由 PLC 管
用于大袋支撑和灌装站的称重系统，该系统包括一个 固的涂漆碳钢结构，可容纳 2 个大袋，气动系统从源头填充它们，一个分流阀组， 交替和自动填充袋子，一个放置袋子的称重平台， 有装载单元和数字秤，用于检查和设置每个袋子的重 量。 价格选项： 根据项目定制新机
VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, Possible additions: horizontal loading screw and hopper + cyclone on top + collector with dust sleeves piping + bag holding structure+bag weighing station + PLC fo ...
根据意大利高质量标准建造， 采用坚固的碳钢焊接结构 平底，带水平螺钉和刮刀，或锥形底部，带对角螺钉 取决于项目要求） 有机玻璃检查窗，根据项目材料和尺寸定制的电动机 桨式最低液位指示器 螺栓检查门，安全装置，符合 CE 标准， 图纸、用户手册、可与我们的 [干燥系统]（.germanplast.eu/listings/4115725-drying-system-for-ve rtical-mixers） 集成，价格选项：根据项目定制尺寸和形
该系统可用于颗粒、再研磨、团聚或粉末，包括：料 、喷射器、鼓风机和根据您的项目定制的管道长度 适当功率的鼓风机，带过滤系统和分流阀的旋风分离 器由坚固的喷漆钢或镀锌钢制成 支撑结构可容纳 1 或 2 个大袋，每个大袋可添加称重系
TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...
