with bespoke exchangeable screen (8-10-12-14-16 mm….), to obtain a more uniform size on agglomerated materials, new machine, complete with lifting auger which collects, material from the discharging hopper of the agglomerator. constructed in a state-of-the-art manner with safety devices side doors basket size about 1.500 mm x diam.600 mm. (or bespoke) gearmotor 0,75 kw screw diam. 220 mm 1,5 kw It can be completed with a pneumatic extraction system to bag filling station or vertical mixer, price options: new machine, bespoke to projecr
ROTO-CLASSIFIER to obtain a more uniform size on agglomerated materials, with exchangeable screen (8-10-12-14-16 mm….) suggested 10 for PE 12 for PP, constructed in a state-of-the-art manner with safety devices, side doors, basket size about 1500 mm x diam.600 mm.(or bespoke), gearmotor 0,75 kw, new machine, complete with lifting auger which collects material from the discharging hopper of the agglomerator., screw diam. 220 mm 1,5 kw, It can be completed with a pneumatic extraction system to bag filling station or vertical mixer, installed power - used power in work: about 60-65% : 0,75, availability: 5 weeks ca, options available: screen holes - length, conditions: new machine
CONVEYOR BELTS SYSTEM to load scraps onto shredder or granulator, 1st conveyor, made to open the bale and manually separate materials, width 1.200 mm., length 5.000 mm. horizontally set, plain belt which can be either in PVC or RUBBER,, supporting structure made in sturdy carbon steel with short walls, Adjustable speed (average 15 m/min, 2nd coveyor, meant to lift pre-selected material onto the machine, width 1.200 mm, length 5.500 mm 30°inclination, Belt can be either in PVC or RUBBER, fishbone orwith draggers, supporting structure made in sturdy carbon steel, side walls 500-700 mm high, Adjustable speed (average 60 m/min, These machines are prepared to be connected to an existing electric panel to be synchronized with the main machine, availability: 3-5 months from drawing confirmation, working width: 1200 mm., options available: different angle, size, bekt material,..
Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.
Made in sturdy painted carbon steel, Size and angle depending on availability of the moment
2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics, ...
ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks (f ...
ALL PURPOSE, SHREDDER 1.000 mm.18,5 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This machine is the most cost-effective among similar ones, constructed entirely in Italy with excellent materials, components, and technology, made to last and perform for many years. We can supply all spares and accessories., Ideal to start your own small business or to be dedicated to a few particular scraps., Constructed according to the latest safety regulations, it comes with a 12 month warranty and a 24/7 support service., Rotor width 1.000 mm. Rotor diameter 190 mm Motor power 18,5 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.ger ...
ALL PURPOSE 4-SHAFT SHREDDER 1500 mm.134 kW, for plastics, cardboard, cables, WEEE and more, This is a versatile 4.shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic, this machine comes from our long experience in size reduction., Service is available with us and our 24/7 post-sale assistance guarantees that you will never be let down., Rotor width 1.500 mm. Shredding chamber :1.500 x 1.200 mm Motors power 2x45 kW + 2x22 kw kW (or bespoke to project), planetary gearboxes, inverter for reverse movement on pre-settable threshold, Knives: 30+30 50 mm thick, 2 hooks (or bespoke to project for material , size and no.of hooks), screen : 50 mm holes (or bespoke to project), Electrical ...
ALL PURPOSE, SHREDDER 1.000 mm.45 kW, This is a new machine engineered to offer the best possible results in size reduction of various materials.for plastics, cardboard, pipes, paper, cables, tires, wood and more, This machine is the most cost-effective among similar ones, constructed entirely in Italy with excellent materials, components, and technology, made to last and perform for many years. We can supply all spares and accessories., This is the standard size, the most versatile in its range., Constructed according to the latest safety regulations, it comes with a 12 month warranty and a 24/7 support service., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 1.000 mm. Rotor diameter 190 mm Motor power 45 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ra ...
ALL PURPOSE, SMALL SHREDDER 600 mm.18,5 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This is a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 600 mm. Rotor diameter 190 mm, n.22 bolted reversable cutting pieces 40x40 mm. Motor power 18,5 kW (or bespoke to project), belts transmission to STM gearbox, Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with adjustable run, 0,75 kW hydraulic pack, control cabinet with PLC Siemens 1200 + Siemens HDMI 4” panel., Sturdy supporting structure in solid carbon steel, forklift slits, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Possible Industry 4.0 confirguration on separate offer ...
ALL PURPOSE, SINGLE SHAFT SHREDDER 1.300 mm.55 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This is a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 1.300 mm. Rotor diameter 450 mm, Shredding chamber 1.300 x 650 mm. Motor power 55 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure in solid carcon steel, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.germanplast.eu/listings/4462316-conveyor-with-metal-detecto r) and [extraction](.germanplast.eu/listings/4115563-used-extraction-belt-450 -x-3-5 ...
ALL PURPOSE 2-SHAFT HEAVY DUTY, HYDRAULIC SHREDDER 1.600 mm.220 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.600 mm long shafts Shredding chamber :1.600 x 1.700 mm, Hydraulic motors 2 x 110 kw, planetary gearboxes, inverter for reverse movement on pre-settable threshold, n.11 knives, 60 mm.thick, 4 hooks (or bespoke to project), Electrical control sy ...
螺旋输送机用于从搅拌机收集并输送至大袋加油站，1 .5千瓦电机，安装在两个固定+2个可旋转轮上，可调节 卸料高度距地面260-280毫米，装载高度距地面700毫米， 使用过的机器，翻新，装机-工作用电量：约60-65%：1.5 千
VIBRATING SCREEN 2 OUTLETS, Support structure made of painted carbon steel, Screen dimensions 1500x500 mm, n.2 material discharge outlets, upper screening frame 8 mm., closed at the start for 200 mm, with flow deflector flaps, AISI 304 stainless steel mesh, Drive system comprising 0.75 kW, 1 HP B3 P4 400 V 50 Hz electric motor,, eccentric drive unit., Fixed side and top safety guards,, Electrical system with start/stop switch and emergency stop button., Safety side protection carters, Instructions manual, CE, electrical drawings., If you need anything different please give us the following details., HEIGHT - LENGTH - SCREEN HOLES - NUMBER OF SCREENS - CAPACITY in kg/h, Standard classifying surface is 1500×500 mm. (x 1.000 mm H) which covers most extruders up to 1300 kg./h, but you can have longer surfaces when a cooling action is needed, particularly for PVC, or for higher capacity extr ...
鹅颈形输送带，尺寸：地面3.5米，水平2.2米+1.18米。 斜角45，卸料点1.166毫米，机器全新，仅用于测试。 作宽度约450毫米，配备运输桨，1.5千瓦齿轮电机，末 端装有直径250毫米的磁鼓。分离的黑色金属材料排出 ，该机器安装在1500 WLK碎纸机下方，条件：如新，类型：抽取
绞线颗粒机，100毫米宽转子，170毫米，适用于最大12 线，固定螺距，最大容量200公斤/小时，3.0千瓦驱动 皮带传动，通过逆变器调节速度变化，气动活塞调节 滚压，机器结构上的电控面板，铰链切割室，可完全 开，n.30刀具，切割罩隔音面板， 底座安装在轮子上，用户手册，符合CE标准，尺寸： ×宽×高 0.86 x 0.92 x 1.57米，重量约280公斤，装机功率-工作用功率：约60-65 %：3.0千瓦，供应时间：60个工作日
断头台卷线片 60 吨，工作宽度 3.000 毫米，工作高度 850 毫米，切割力 2x30 吨，2号泵 38+38 升/分钟，体积 26.4+26.4 立方厘米，加速：51 毫米/秒，减速：（80 巴）31-15 毫米/秒，油箱 255 升，驱动 15 千瓦，400伏 50 赫兹，带刀具保护，液压锁定系统，拉绳紧急系统， 保护网格，配备控制面板、顶部支撑、液压包节省空 、用户手册、图纸、CE合规、12个月有限保修、可能 加输送带、卷线器处理机、备用刀具另行提供。力 60特斯拉，装机功率 -
垂直混合器 16,000 升，总高度约 6.450 毫米，顶部装载旋风和集尘套，最大直径 2,380 毫米，采用涂漆电焊碳钢制造，内藪直径 350 毫米，带安全格栅和百叶窗的取样料斗，毫米 600×500，滑轮和皮带传动系统，由卡托保护，检查门 有安全限制，清洁铰链门，底部为锥体，可完全卸油 ， 带安全开口，侧排管通往带阀门的大气袋，桨式最大 位指示器，自动润滑套件，11千瓦电动机，配备控制 系
水冷罐，用于绞线颗粒器，采用AISI4304不锈钢制造， 轮（其中两个带制动），整体尺寸：长×宽×高 2.5 x 0.5 x 1.0 米，罐体尺寸：长×宽×高 2.5 x 0.5 x 0.25 米
断头台，纸张和塑料用卷片片，50 T，工作宽度 2.500 毫米，工作高度 850 毫米，切割力 2x25 吨，No.2 泵 38+38 升/分钟，体积 26.4+26.4 立方厘米，加速：83 毫米/秒，转速：（80 巴）20-41 毫米/秒，油箱 255 升，15 千瓦驱动，400V 50 赫兹，带刀状保护， 液压锁定系统、拉绳应急系统、保护网格，配备控制 板、顶层支撑、液压包空间节省、用户手册、图纸 CE合规、12个月有限保修，可能新增输送带、卷线器 理机、备用刀具另行提供。参
断头台纸张和胶片卷片片 50 吨，工作宽度 2.500 毫米，工作高度 1.250 毫米，切割力 2x25 吨，2 号泵 38+38 升/分钟，体积 26.4+26.4 立方厘米，加速：83 毫米/秒，减速：（80 巴）20-41 毫米/秒，油箱 255 升，驱动 15 千瓦，400V 50 赫兹，带刀具保护，液压锁定系统， 拉绳紧急系统、保护网格（配备控制面板）、顶部支 、液压包空间节省、用户手册、图纸、CE合规、12个 有限保修、可能增加输送带、卷线器处理机、备用 具另行提供。详见项
断头台，纸张和塑料用卷轴分片机 2500x850mm，工作宽度2.500毫米，工作高度850毫米，切割 2x17.5吨，2号泵30 + 30升/分钟，泵体积21+ 21 ccm，加速84毫米/秒，下降（80 Bar）20-40毫米/秒，油箱175升，9千瓦驱动400V 50 Hz，带刀具保护， 液压锁定系统、拉绳紧急系统、保护网格（配备控制 板）、顶部支撑、液压包节省空间、用户手册、图 、CE合规、12个月有限保修、可能新增输送带、卷轴 理机、备用刀具（另行提供
断头台，纸张和塑料用卷片片，35吨，采用坚固涂漆 材制造，工作宽度2.500毫米，工作高度1.250毫米，2号 30+30升/分钟，体积21+21毫升，加速：84毫米/秒，转速 ：（80巴）40-20毫米/秒，油箱175升，切割力2x17.5吨，9 瓦驱动400伏50赫兹， 配备刀具保护、液压锁定系统、拉绳紧急系统、防护 格（配备控制面板）、顶部支撑、液压包节省空间 用户手册、图纸、CE合规、12个月有限保修、加速速 系统、可能增加输送
断头台，纸张和塑料用卷片切割机 25 吨，工作宽度 1.500 毫米，工作高度 850 毫米，切割力 1x25 吨，7.5 千瓦驱动，400V 50 Hz，1 号泵 24 升/分钟，体积 16 ccm，速度：上升 53 毫米/秒，下降速度（80 巴）：25 毫米/秒，OIl 罐容量：135 升，带刀具保护，液压锁定系统， 拉绳应急系统、保护网格（配备控制面板）、顶部支 、液压包空间节省、用户手册、图纸、CE合规、12个 有限保修、可能增加输送带、卷线器处理机、备用 具另行优惠，力：25
断头台，纸张和塑料用卷轴片条，50吨，工作宽度3.000 毫米，工作高度1.250毫米，2号泵38+38升/分钟，体积26.4 +26.4毫升，加速：83毫米/秒，减速：（80巴）41-20毫米/ 秒，油箱255升，切割力2x25吨，15千瓦驱动400伏50赫兹 带刀具保护， 液压锁定系统、拉绳紧急系统、保护网格（配备控制 板）、顶部支撑、液压包节省空间、用户手册、图 、CE合规、12个月有限保修、可能新增输送带、卷轴 理机、备用刀具（另行提供
断头台，纸张和塑料用卷片片，30吨，工作宽度1.500毫 米，工作高度1.250毫米，切割力1×30吨，1号泵24升/分 ，体积16立方厘米，速度：上升53毫米/秒，转速（80 ）：25毫米/秒，油箱：135升。单活塞，双侧机架，避 免振荡和摇晃，7.5千瓦驱动，400V 50赫兹。安全装置包括：紧急停止按钮+拉绳停止+刀保 护+双手作+保护网格+液压刀锁系统。液压包可安装在 部以节省空间，配备控制面板，用户手册、图纸、CE
断头台，纸张和塑料用卷片条，60吨，工作宽度3.000毫 米，工作高度1.500毫米，提高转速系统，切割力2x30吨 2号泵38+38升/分钟，体积26.4+26.4立方厘米，加速：51 米/秒，转速：（80巴）31-15毫米/秒，油箱255升，15千 驱动400伏50赫兹， 配备刀具保护、液压锁定系统、拉绳紧急系统、防护 格，配备控制面板，顶部包体，液压包空间节省， 户手册，图纸，合规性，12个月有限保修，可能增加 送带、卷线器处理机、备用刀
断头台，纸张和塑料用卷片切片机，60吨，工作宽度3. 500毫米，工作高度1.500毫米，切割力2x30吨，2号泵38+38 /分钟，体积26.4+26.4立方厘米，加速：51毫米/秒，转 ：（80巴）31-15毫米/秒，油箱255升，15千瓦驱动400伏5 0赫兹，带刀具保护， 液压锁定系统、拉绳紧急系统、保护网格（配备控制 板）、顶部支撑、液压包节省空间、用户手册、图 、CE合规、12个月有限保修、可能新增输送带、卷轴 理机、备用刀具（另行提供
