FREUTEK máquina utilizada para venda

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Description: Battery strapping machine for polyester strap with vibration welding. Designed to apply high tensions to the strap, it has a maximum tensioning capacity of 2800 N expressly designed for polyester, PP or PET strapping, strap width from 13mm to 16mm, thickness 0.5 - 1.2 mm. It guarantees excellent performance by combining the solidity of the mechanics with the practicality and precision of digital technology. 3.0Aih12VCD lithium battery. Recharge time 90 minutes, strapping cycles for each recharge from 100 to 220. Weight about 3 kg. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 450 x 180 x 300 mm, weight approx.: 7 kg

Description: Pneumatic strapping tool for plastic or polyester PP / PET straps from 13 mm up to a maximum of 19 mm, strap thickness: min 0.6 max 1.2. mm. Very easy to use, very reliable and economical. The strapping tool is equipped with a considerable traction power (max 270 Kg), with which it is possible to strap boxes, pallets, packaging in general also vertically or laterally. In fact, the comfortable grip allows you to work even in the presence of irregular packs, very high or very long pallets. Just insert the two edges of the strap into the strapping mouth, activate the retraction button and finally the welding button (by vibration). A strapping practically impossible to reopen is created (max 85%). Air pressure: 6-7 Bar / 85-100 PSI. Weight: 3,7 Kg. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 200 x ...

Description: Magnetic force 600 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. NOTE: Free shipping to many European countries. Details can be found in the Special Terms & Conditions of this auction. Approximate shipping time: 15 working days after settlement. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 260 x 300 x 135 mm, weight approx.: 18 kg

Description: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W, 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18- 20,M22,M24,M27- 30,M33,M36,M42,M48 The item that is deliver ...

Description: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: DIN M6-M30 COLLET: M6-8,M10,M12,M14,M16,M18-20,M22,M24,M30 The item that is delivered is NOT the ...

Description: Power 1.5 kW, water cooling, wavelength 1070 nm, cleaning width 50 mm, power supply 220 V. 1. Metal surface rust removal/carbon steel rust removal/weld seam cleaning/metal surface paint removal/steel pipe paint removal/aluminum plate surface cleaning oxide film, , 2. Laser cleaning technology refers to the use of high-frequency high-energy laser pulses to irradiate the surface of the workpiece, The coating layer can instantly absorb the focused laser energy, causing the surface oil stains, rust spots or coatings to evaporate or peel off instantly. It is a high-speed and effective cleaning method for removing surface attachments or surface coatings, and the laser pulse with a short action time, Will not harm metal substrates under proper parameters. Laser cleaning is a new technology based on the interaction effect between laser and matter. Different from traditional mech ...

Description: Power 1.5 kW, water cooling, 220V power supply. 1. Laser metal welding, the basic welding seam is beautiful and fast, the operation is easy to learn, the welding is firm, and the sealing is good, 2. The portable air-cooled handheld laser welding machine adopts an integrated integrated fiber laser and is equipped with a self-developed wobble welding head. The high-tech air-cooled heat dissipation system fills the new application of hand-held welding in the laser equipment industry. It has multiple advantages such as simple operation, beautiful weld seam, fast welding speed, small size and convenient transportation. It is suitable for welding thin stainless steel plates, iron plates, and galvanized plates. , aluminum alloy and other metal materials, it can perfectly replace traditional argon arc welding, electric welding and other processes. It can be widely used in complex an ...

Description: Applying to make untreatment parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 240 x 245 mm, weight approx.: 13 kg

Description: The laser marking system is equipped with a safety housing, using high quality components, ideal for marking, engraving and cutting metal products. It has a motorised vertical axis that is easy to use. At work, the fully enclosed fibre laser marking machine will lock the fumes and dust generated by machining inside. Capable of working on a wide range of metals: carbon steel, mild steel, stainless steel, aluminium, copper, magnesium, zinc, on rare metals and alloys such as gold, silver, titanium, and on metal surfaces with special treatments such as anodised aluminium, plated surfaces. It can also mark non-metallic surfaces, for example: plastics such as ABS, PVC, HDPE, PP, PC, PE, rubber and resins. Useful for permanently marking logos, barcodes, QR codes, serial numbers. Occupies a small space and is suitable for marking small objects. Laser power 50W, Laser wavelength 1064 ...

Description: Chuck for self-centering lathe 3 + 3 jaws 100mm, 3500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 165 x 175 x 180 mm, weight approx.: 3 kg

Description: Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 210 x 100 mm, weight approx.: 9 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg

Description: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 14 kg

Description: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 7 kg

Description: Collet Chuck Tool holder SK40-ER16-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 12 kg

Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (150x200 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 180 x 140 mm, weight approx.: 22 kg

Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (100x125 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 280 x 140 x 140 mm, weight approx.: 15 kg

Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg

Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 200 x 90 x 90 mm, weight approx.: 5 kg

Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (150x175 mm, h 50 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 450 x 180 x 150 mm, weight approx.: 26 kg

Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (100x260 mm, h 45 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 360 x 140 x 140 mm, weight approx.: 20 kg

Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg

Description: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 250 x 90 x 90 mm, weight approx.: 3 kg

Description: 6' Hydraulic pressure 4500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 640 x 240 x 155 mm, weight approx.: 48 kg

Description: Series of 32 Johnson parallel-plane gauge steel blocks in wooden case. Hardness HRC64 Complies with ISO 3650 - DIN 861. Gauge blocks are reference measuring instruments for checking other instruments. The package contains 32pcs of different sizes. 5-point calibration, measurement uncertainty of the deviation in the center (0.07 + 0.5 · L) µm. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 135 x 60 mm, weight approx.: 2 kg

Description: 4' Hydraulic pressure 2500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 470 x 185 x 130 mm, weight approx.: 23 kg

Description: Pressure 5000 Kg (150x300 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 300 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 580 x 200 x 195 mm, weight approx.: 36 kg

Description: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 480 x 200 x 180 mm, weight approx.: 32 kg