Presses plieuses (132)

Spécifications: - longueur de travail 3500 mm - Passage de la cage 3050 mm - force de pressage maximale 2000 kN - Table de distance / ram max. 480 mm - Projection sur pied 260 mm - Course de bélier env. 300 mm - Vitesses de levage - Ralenti en aval max. 100 mm/sec - Vitesse de suralimentation 80 mm/sec - Vitesse de pression vers le bas max. 10 mm/sec - Puissance d’entraînement totale 25 kW - Espace requis env. L 4500 x H 3150 x P 2100 mm - Poids approx. 16000 kg -avec: - Contrôle CNC CYBELEC renouvelé en 2008 - dispositif de couronnement contrôlé - gabarit arrière contrôlé avec réglage en hauteur 5 - 1000 mm - hydr. Serrage d’outils - Outil supérieur + outil de matrice universel - Exigences matérielles - Panneau de commande bimain

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: 500 mmcontrol: DA 66T oil volume: 150 ltr.voltage: 380 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=KRifrqTgkVU-------------------------- ----------------------SPEED BEND PRO CNC press brake: increased installation height increased cylinder stroke and increased bending beam speeds------------------------------------------------Equipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA-66T graphics/touchscreen 2D graphic touchscreen progr ...

Presse abkant machine Abkantbank presse d’occasion Fabricant : Mengele Type : C320-4B Année de construction : 1966 dernière révision et réparation : 2000 Localisation D-01587 Riesa Dimensions BxH : 6.250 x 3.650 mm Largeur de l’arête : 6.150 mm épaisseur max. de tôle à 6.000 mm de longueur de flexion : env. 7,5 mm. Les machines sont conçues pour des arêtes très profondes, d’où des trous de joues très profonds. 300 t de force de pressage d’origine - en 1989, la force de pressurage a été augmentée à 350 tonnes. La presse est en très bon état malgré l’âge. La machine est démontée et prête à être décharchée. Documentation de la machine. Poids : env. 45 t

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mmDemonstration Machineâ?¢ Basic C-frame designâ?¢ Compact benchtop modelâ?¢ Ideal for prototypes and small production runsâ?¢ Very short setup timeâ?¢ Functionally simpleâ?¢ Wide range of applicationsâ?¢ Low noise levelâ?¢ Low power consumptionâ?¢ Easy to operateIncludes optional equipment:- DELEM DA 41T CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 €: 504.24 €: 1 : 40 to: 1500 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 2000 mm: 950 mm: 1900 mm: 1800 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 57300 €: 804.11 €: 1 : 42100 €: 60 to: 2100 mm: X und Y Achse : 160 mm: 1700 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 7.5 kW: 2450 mm: 1600 mm: 2235 mm: 4340 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslaser safety device Fiesslermotorized crowning tableintermediate pieces for the upper tool clampingdie holder for 60 mm toolsdie with 4 V openingsupper tool, slightly cranked, sectionedfoot pedaluser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 €: 455.04 €: 40 to: 800 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 25400 €: 485.14 €: 40 to: 1250 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tpressing length: 3050 mmdistance between columns: 2550 mm: Cybelec Visitouch stroke of ram: 700 mmcolumn arm: 405 mmdistance between table / ram: min. 320 / max. 1020 mmtotal power requirement: 29,5 kWweight of the machine ca.: 15.500 kgAccessories/equipment:Rear stopStop support adjustment:- Stop range X-axis (from bending line): 5-1000 mm- Adjustment speed X-axis: max. 500 mm/secHeight adjustment- Adjustment range R-axis (from table surface): 85-235 mm- Adjustment speed R-axis: max. 150 mm/secStop finger adjustment:- Adjustment range Z1-axis (from left table front): 520-2365 mm- Adjustment speed Z1-axis: max. 1000 mm/sec- Adjustment range Z2-axis (from left table front): 690-2535 mm- Adjustment speed Z2-axis: max. 1000 mm/sec- Adjustment range X1-axis (from center position): ± 125 mm- Adjustment speed X1 axis: max. 250 mm/secDie displacement - adjustment via rear stop ( ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 400 mmquantity of oil: 300 lControl: Cybelec Visitouch total power requirement: 15 kWweight of the machine ca.: 10.700 Kgrange L-W-H: 4200x2200x3200 mmEquipment:- Controlled axes: Y1, Y2, X, R, - SICK” light barrier in front of the machine- Side safety guards- Protective grille behind the machine- foot switch- incl. toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: 1520 mm: 300 mm: hydraulisch : 11 kW: 2630 mm: 1000 mm: 2450 mm: 3270 kg: 610 mm: 1520 mm: 5 mm/s: 9 mm/s: 10 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tchamfer lenght: 3060 mmdistance between columns: 2690 mmStroke: 365 mmControl: DELEM DA 65 throat: 410 mmdayligth: 535 mmdimensions: 3660 x 2310 x 3100 mmmachine weight ab.: 17.700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 135 tchamfer longueur : 4100 mm distance entre les colonnes : 3600 mm Commande : DELEM alimentation en baisse : 100 mm/sec Courbure de l’alimentation : 10 mm/sec Puissance totale requise : 15 kW-poids de la machine vers : 11,700 kg Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

: 150 t: 3100 mm: 2600 mm: 400 mm: 200 mm: 600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pression : 250 tchamfer Longueur : 3550 mm Distance entre les colonnes : 3050 mm Puissance totale requise : kW Poids de la machine environ : 27 000 kg Dimensions de la machine : 4500 x 2000 x 3400 mm Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 225 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC DNC 86 PS total power requirement: 18,5 kWweight of the machine ca.: 18.000 kgdimensions of the machine ca.: 5180x2400x3200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pression : 100 tchamfer Longueur : 3050 mm Distance entre les colonnes : 2550 mm Poids de la machine environ : 9 000 kg Dimensions de la machine vers : 4000x2100x2700 mm Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec DNC 70 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2100 mmcolumn arm: 200 mmstroke of upper beam: 100 mmdayligth: 280 mmtable height: 840 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/secback stop - adjustable: max. 650 mmControl: ATS 560 oil volume: ca. 150 lvoltage: 380 Vtotal power requirement: 7.5 kWweight of the machine ca.: 4700 kgEquipment:- electro-hydraulic NC press brake - easy to operate- HACO NC control model ATS 560 7-digit LED display Memory capacity for 200 programs with a maximum of 400 sets Working with pressure and immersion depth Inching function for electric backgauge Set / actual value input for back gauge Swiveling control panel, left front- NC controlled axes : Y1 Y2 X axis- NC electro-hydraulic synchronization and immersion depth positioning- NC electro-motorized backgauge with ball screws speed 240 mm/sec. including 2x manually adjustable stop fi ...

pression : 320 tchamfer longueur : 6100 mmcontrôle : MNC95 Nombre d’heures de travail : 4312 hvoltage : 380 V / 50 Hz Puissance totale requise : 25 kW. Poids de la machine environ : 26 t Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pression : 160 tchamfer longueur : 3200 mm Contrôle : CYBELEC CybTouch 15 ch poids de la machine environ : 14 000 kg dimensions de la machine environ : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATS 585 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmFurnishing:- NC controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control ATS 560 Positioning of the backgauge (X axis) Depth setting positioning (Y1+Y2 axis) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, left front- electric back gauge (X axis) with 2 stop fingers, manually adjustable (R+Z axis)- System A tool holder - with cambered upper wedge- Split insert/bending tools- side protection grids- rear protection- free-moving double foot switch- Operation manualThe d ...

pressure: 400 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC ModEva 10 S total power requirement: 47 kWweight of the machine ca.: 30.400 kgdimensions of the machine ca.: 6000x3000x3450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pression : 200 tchamfer longueur : 4100 mm Contrôle : CYBELEC DNC 900 course : 260 mmPoids de la machine environ : 16 000 kg Dimensions de la machine vers : 4500x2400x3000 mm Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Delem DA 66S stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 10.000 kgdimensions: 4200x2200x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 2550 mmdistance between columns: 2050 mmcontrol: CYBELEC ModEva 10 S total power requirement: 25 kWweight of the machine ca.: 11.000 kgdimensions of the machine ca.: mMachine:- Sturdy machine frame constructed as a fully welded all-steel structure- Pressure beam with high bending strength- Electrohydraulic top drive via proportional valves- Modern block hydraulic systemOptional equipment:- Increase in installation height and stroke by 150 mm each- Backgauge system 2 - 2 axes, R-axis adjustment 150 mm- 2 x additional stop fingers 2/4-axes, however, offset by 20 mm- CNC holding device- Distance from the bending line to the holding device approx. 240 mm- EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering- EHT lower tool clamping, mounting width 55 mm, pneumatic- Hardened insert strip for EHT lower tool clam ...

pressure: 50 tchamfer lenght: 1550 mmdistance between columns: 1150 mmControl: CYBELEC DNC 1200 PS Eco column arm: 405 mmtable height: 900 mmstroke of ram: 400 mmdistance between table / ram: 720 mmtotal power requirement: 9,5 kWweight of the machine ca.: 5.200 kgdimensions of the machine ca.: 2000x1900x2920 mmAccessories/Equipment:- CYBELEC DNC 1200 PS Eco controller- 2 support arms- 4 stop fingers- Lasersafe- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 400 mmweight of the machine ca.: 15.300 kgdimensions of the machine ca.: mMachine:- Sturdy machine frame- Press beam- Spherical bearing for the press beam with press beam tilt- Electro-hydraulic top drive- Block hydraulic system- Length measuring system (Y-axis) with dynamic spring compensation- Control cabinet air conditioning unit- Adapter strip for tool mounting- 2 stop fingersOptional equipment:- 2-axis backgauge (XM/XS, R)- 1 sheet metal holding device 200 daN CNC- 2 x additional stop fingers 2/4-axis- 1 x pneumatic upper tool clamping 26 mm- 1 x pneumatic lower tool clamping 55 mm- 1 x lower tool shift EHT pneumatic- 1 x CNC crowning device 3000 kN/m- 1 x Operator Safety Guard PILZ PSENvip Productive- 2 x Bending aid 1500 N- 1 x Support strips for bending aid- 1 x Parking position right, short- 1 x Spec ...

pressure: 90.0 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 135 mmdayligth: 180 mmthroat: 350 mmworking feed: 8.0 mm/secreturn speed: 68.0 mm/secwork height max.: 805 mmback stop - adjustable: max. 620 mmControl: ENC 310 oil volume: 100 ltotal power requirement: 7.5 kWweight: 5840 kgrange L-W-H: 4000 x 2040 x 2450 mm from a maintenance workshop very good conditions ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=PIiHc2e7h28Features: - NC electro-hydraulic press brake- with DURMA NC control ENC 310 Illuminated LCD display X-axis control & value display Y-axis control & value display- Swiveling operator panel, front left- NC controlled axes: Y1/Y2 + X- NC electro-motorized backgauge (X-axis) with 2x manually adjustable backgauge fingers including lateral and height adjustment (Z+R axes)- NC electro-motorized depth adjustment (Y-a ...

pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2600 mmthroat: 250 mmdayligth: 325 mmpiston stroke: 120 mmtable height: 875 mmajustment speed: 70.0 mm/secworking feed: 9.0 mm/secreturn speed: 60.0 mm/secpressure: 220 barControl: ATL 550 total power requirement: 5.6 kWweight: 8400 kgrange L-W-H: 3500 x 1700 x 2240 mm from a maintenance workshop very good / well-maintained condition ()Equipment:- simple NC electro-hydraulic press brake with torsion shaft- ATLANTIC NC control ATL 550 Positioning of the backgauge (X) Positioning of the depth adjustment (Y1 Y2) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, front left- NC electro-motorized backgauge (X axis) 2x manually adjustable stop fingers- 1x set of split roe foot upper tools- 1x rotating universal die block- 1x freely movable 2-hand/foot control- Sa ...

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmcolumn arm: 300 mmstroke of ram: 240 mmquantity of oil: 200 lcontrol: CYBELEC Cybtouch 15 range L-W-H: 4500x2200x3000 mmEquipment/accessories:- manual crowning- 3 x manual stop fingers- die displacement- pneum. upper tool clamping- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2550 mmstroke of upper beam: 200 mmthroat: 300 mmdayligth: 440 mmworking feed: 9.0 mm/secreturn speed: 80.0 mm/sec: 265 barControl: konv. work height max.: 965 mmtotal power requirement: 15.0 kWweight: 10500 kgrange L-W-H: 3360 x 1750 x 2800 mmEquipment:- simple / conventional electro-hydraulic press brake- pivoting operation, front left- electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism- Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers- manual (jog mode) and automatic cycle selector switch- manual table crowning- split set of roe foot upper tools ... H = 210 mm- 1x as good as new universal V-die block, reversible with anti-corrosion grease V openings in mm : 12/35/25 50 10/20/16/16 75 Dimensions of ...

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 150 mm/secwork speed: 10.0 mm/secreturn speed: 140 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 110 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 15000 kgrange L-W-H: 5000 x 2400 x 2850 mmALPMAC Manufacturer Video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC Product Video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth--------------------------------------------------------! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMAN ...

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mmEquipment:- CNC electro-hydraulic folding/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front- CNC axis adjustment: Y1 - Y2 - X - R axis CNC crowning Manual adjustm ...

pressure: 040 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swit ...

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swi ...

pression : tchamfer longueur : mm. distance entre les colonnes : mm. besoin total de puissance : kWweight de la machine ca. : trequired space : mLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

pressure: 220 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 3600 x 2000 x 2900 mmweight: 11.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 200 mmdayligth: 480 mm: 200 mm/sbending speed: 0-10 mm/s: 120 mm/stotal power requirement: 7,5 kWdimensions: 3600 x 1800 x 2700 mmweight: 8.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 6100 mmdistance between columns: 5600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 160 mm/sbending speed: 0-9 mm/stotal power requirement: 32 kWweight of the machine ca.: 36.000 kgdimensions: 6970 x 2300 x 4150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3000 mmControl: Cybelelc DNC 1200 total power requirement: kWweight of the machine ca.: 18.500 kgdimensions of the machine ca.: 4300x2750x3750 mmAccessories:- 2-hand foot switch- Lasersafe Fisseler- Hydraulic tool clamping at top and bottom- Die shift- Hydraulic crowning- Support arms- Cybelec DNC 1200 control- 1 set of upper and lower tools- Controlled axes y1, y2, x, r, z1, z2, inclined stop- Protective grilleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcontrol: CYBELEC DNC 1200 PS Eco stroke: 550 mmtable height: 700 mmthroat: 405 mmdistance between table / ram: 320-870 mmcolumn arm: 405 mmweight of the machine ca.: 14.000 kgAccessories / equipment:- controlled axes: Y1 - Y2 - X - R- Z1 and Z2 can be moved manually- Lasersafe angle measurement- Pneumatically adjustable support table- pneumatic upper and lower tool clamping- 2-hand foot control- manual crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 11.500 kgdimensions: 4080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 3100 mmdistance between columns: 2600 mmControl: Cybelec VisiTouch 24 throat: 500 mmdayligth: 500 mmstroke: 300 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 18.500 kgdimensions: 3900 x 1970 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmArm length: 500 mmdayligth: 500 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 21.000 kgdimensions: 4850 x 2300 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 155 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 77.0 mm/secControl: P 40 work height max.: 878 mmtable width: 104 mmoil volume: 150 ltotal power requirement: 11.0 kWweight: 7550 kgrange L-W-H: 3550 x 2150 x 2600 mmEquipment:- NC electro-hydraulic press brakes- with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible- Swivel operation, front left- NC controlled axes : Y1 Y2 X- NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including lateral and height adjustment (Z R axis)- 1x branded set of upper tools (split)- 1x branded Multi-V bottom die  ...

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 200 mmajustment speed: 80.0 mm/secworking feed: 10.0 mm/secreturn speed: 58.0 mm/secdayligth: 385 mmtable width: 240 mmwork height max.: 885 / 1050 mmoil volume: 180 ltr.total power requirement: 15.0 kWweight of the machine ca.: 9850 kg.range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=o_t9BBMsNNsEquipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display- swiveling operation, mou ...