pièces électriques machines d'occasion à vendre (640)

Auction-ID: A1-41957-217

Auction-ID: A7-46691-20

Fabricant : KOKI TEC Modèle : SELBO III 350 Type : Machine à souder sélective en ligne Caractéristiques techniques - Dimensions extérieures : 2 750 (L) x 1 430 (L) x 1 300 (H) mm - Taille minimale du circuit imprimé : 100 (L) x 100 (L) mm - Taille maximale du circuit imprimé : 350 (L) x 400 (L) mm - Épaisseur du circuit imprimé : 0,8 à 2,0 mm - Hauteur maximale des composants : face supérieure 110 mm ou moins, face inférieure 25 mm ou moins - Étapes du programme : 400 étapes, 100 fichiers - Diamètre de la buse : diamètre intérieur de 2 à 20 mm - Capacité de soudure : environ 16 kg (densité spécifique 7,3) - Apport en azote : 0,5 MPa, 25 L/min par capsule - Approvisionnement en air : 0,4 à 0,5 MPa - Source d’alimentation : CA triphasé 200V

Manufacturer: KOKI TEC Model: SELBO III 5051 Type: Inline selective soldering machine Specifications - Outer dimensions: 3,236 (L) x 1,577 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 500 (W) x 510 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 20 kVA (heater) / 6 kVA (solder pot) - Net weight: 450 kg (fluxer) / 390 kg (heater) / 480 kg (solder pot) Key Features - Improved soldering quality with reduced solder defect rate - Inline automation for labor savings in PCB assembly - Modul ...

Manufacturer: KOKI TEC Series: ULTIMA (TakuROBO Benchtop Type) CE Mark: Registered on all three units System comprises: ULTIMA-TRZ + ULTIMA-SPZ + ULTIMA-PHS Suitable for: Prototype to small and medium volume PCB production ULTIMA-TRZ Selective Soldering Machine - Dimensions (without signal tower): 940 (L) x 885 (W) x 540 (H) mm - Outer dimensions (with signal tower): 940 (L) x 885 (W) x 753 (H) mm - Body dimensions: W620 x L940 x H442 mm - Minimum PCB size: 50 (W) x 50 (L) mm - Maximum PCB size: 250 (W) x 330 (L) mm - PCB thickness: 0.8 to 2.0 mm - Machine weight: approx. 120 kg - Power source: single-phase AC 200V plus/minus 5 percent, 4 kVA - Nitrogen supply: purity 99.99 percent or more, 0.4 to 0.5 MPa, 25 L/min - Solder pot capacity: approx. 16 kg (specific gravity 7.3) - Nozzle range: 17 sizes from diameter 2 to diameter 20 mm inner diameter, including Aerojet - nozzle - Stand ...

Manufacturer: NeoDen Model: IN8C Type of Machine : Reflow Oven - Heating zones: 8 total (4 upper / 4 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: 3.6 kW - Typical working power: approximately 1.5 kW - Machine dimensions: 1660 x 607 x 1075 mm (L x W x H) - Net weight: 241 kg - Gross weight: 308 kg Standard Accessories Included  ...

Manufacturer: NeoDen Model: IN12C Type of Machine : Reflow Oven Technical Specifications -Heating zones: 12 total (6 upper / 6 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: approximately 4.8 kW - Typical working power: approximately 2.2 kW - Machine dimensions: 2300 x 650 x 1280 mm (L x W x H) - Net weight: 300 kg - Gross weigh ...

The ND56X is designed for R&D; enterprises, laboratories, and quality inspection rooms. It is a fully automatic defect inspection system suitable for a wide range electronic components and precision parts. CE certified and compliant with SEMI S2/S8 semiconductor industry specifications. X-Ray Tube Source Specifications - Type: sealed micro-focus X-ray tube - Voltage range: 40 to 90 kV - Current range: 10 to 200 uA - Maximum output power: 8 W - Micro focus spot size: 15 um Flat Panel Detector Specifications - Type: TFT Industrial Dynamic Flat Panel Detector (FPD) - Pixel matrix: 768x768 to 1536x1536 - Field of view: 65x65 to 130x130 mm - Resolution: 5.8 Lp/mm - Frame rate (1x1): 20 to 40 fps - A/D conversion: 16 bits Key Features and Functions - Automatic defect detection: size, area, broken wire, bridging and more - Customizable software algorithms: Y/N, crack, broken wir ...

Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa ...

Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V ...

NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 ...

Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300  ...

The NeoDen ND1 is a high-precision automatic SMT screen printer designed for professional PCB solder paste printing. With a repeat accuracy of +/- 12.5 micron at 6 sigma and Cp of 2.0 or greater, it delivers the precision and reliability demanded by high-quality electronics manufacturing. Manufacturer: NeoDen Model: ND1 Fully Automatic Vision Printing Machine Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.6 mm to 14 mm - Maximum PCB weight: 10 kg - Transmission speed: 1500 mm/second maximum - Template frame size: 370x470 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: closed-loop print head with straight line motor - Scraper type: steel or rubber scraper, angles 45 / 55 / 60 degrees - Scraper length: 220 mm to 500 mm - Scraper blade thickne ...

The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct  ...

Manufacturer: NeoDen Model: YS350 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 400x240 mm - Printing area: 500x320 mm - PCB fixed system: pin positioning - Frame size: L 550-650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 230 kg - Gross weight: 280 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine thro ...

Manufacturer: NeoDen Model: YS600 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 600x240 mm - Printing area: 700x320 mm - PCB fixed system: pin positioning - Frame size: L 750-850 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 265 kg - Gross weight: 310 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine th ...

Manufacturer: NeoDen Model: YS1200 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 1200x240 mm - Printing area: 1300x320 mm - PCB fixed system: pin positioning - Frame size: L 1550-1650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 1600x700x1700 mm (L x W x H) - Net weight: 300 kg - Gross weight: 350 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fin ...

Fabricant : Essemtec Modèle : RO300FC US Année de fabrication : septembre 2005 Zones de chauffage : 3 Zones de refroidissement : 1 Zones totales : 4 Tension : 208 V Actuel : 25 A Heures d’ouverture : environ 6 000 État : fonctionne parfaitement Certification : Marqué CE Pour en savoir plus, cliquez ici - / Contactez-nous à -

Manufacturer: NeoDen Model: IN6 Year of Manufacture: Type of Machine : Reflow Oven Key Technical Specifications - Power supply: 110/220 VAC, 1-phase (household power compatible) - Rated power: 2000 W maximum - Heating zones: 6 total (3 upper / 3 lower) - Heating type: aluminum alloy heating plate with nichrome wire - Cooling zones: 1, with bottom cooling fans at offload section - Conveyor speed: 5 to 30 cm/min (2 to 12 inch/min) - Maximum PCB height: 26 mm - Soldering width: 250 mm - Process chamber length: 680 mm (26.8 inch) - Temperature range: room temperature up to 300 degrees C - Temperature control accuracy: +/- 0.2 degrees C - PCB temperature distribution deviation: +/- 1 degree C - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Machine dimensions: 1020 x 507 x 350 mm (L x W x H) - Packing size: 112 x 62 x 56 cm - Net weight: 49 kg - Gr ...

Fabricant : Speedprint Modèle : SP710 État : Bon Pour en savoir plus, cliquez ici - / Contactez-nous à -

Fabricant : Nutek Modèle : NTM530WSXL-1800-3-AW Année de fabrication : 2010 Longueur de la machine : 1800 mm Segments de ceinture : 3 Largeur maximale du circuit imprimé : jusqu’à 460 mm (taille XL) Longueur maximale du circuit imprimé : jusqu’à 460 mm (taille XL) Tension : 230 VAC, monophasée Puissance : 250 VA Poids : 190 kg Certifié CE Pour en savoir plus, cliquez ici - / Contactez-nous à -

Manufacturer: Samco Model: FlexLiner II Year of Manufacture: 2018 Type of Machine : UCP plasma machine The samco-ucp FlexLiner II is a production type plasma cleaning system designed for surface cleaning of various types of leadframe packages. This system operates with a remote plasma source in the downstream process mode. The plasma is generated by RF power in the source and then injected into the process chamber through a shower head. Dimensions: 1,520 mm (W) x 1,410 mm (D) x 2,130 mm (H) Key Features and Benefits - Single substrate production equipment for various types and dimensions of substrates and magazines up to 300 mm x 300 mm - Gentle handling with minimal movement of substrates and magazines - Touchscreen GUI for user-friendly, intuitive operation - Multiple sensor controls for highly reliable operation - High throughput due to simultaneous (un)loading and plasma proce ...

1x Mimot MX216 SL, construit en 03/2010 1x Mimot MB300 216 ML, fabriqué en 01/2012. Nous avons aussi les tapis d’entrée et de sortie pour les deux machines. Pour en savoir plus, cliquez ici - / Contactez-nous à -

Les outils sont en bon état.

Fabricant : Ekra Modèle : Serio 5000 Type de machine : pochoir SMT entièrement automatique et sérigraphie Année de fabrication : 2022 Configuration : Système d’impression double dos à dos Interface utilisateur : contrôle tactile SIMPLEX Alignement de la vision : EVA - Système d’alignement de la vision EKRA (caméras CCD doubles) Nettoyage des pochoirs : nettoyage automatique sous pochoir iROCS Répétabilité de l’impression : +/- 12,5 microns à 6 Sigma Application : Impression à la pâte à souder et adhésif sur les circuits imprimés Pour en savoir plus, cliquez ici - / Contactez-nous à -

Fabricant : Koh Young Année de fabrication : 2022 Type de machine : Pré-AOI - Système d’inspection optique automatisée Les systèmes Koh Young Pre AOI utilisent l’imagerie optique haute résolution et des algorithmes d’inspection avancés pour vérifier la présence des composants, la précision du placement et la couverture de la pâte à souder sur les PCB avant le reflow. Intégrer une station pré-AOI dans une ligne SMT réduit considérablement les taux de défauts, les coûts de remise au travail et les ferrailles en détectant les erreurs dès le plus tôt du processus d’assemblage. Pour en savoir plus, cliquez ici - / Contactez-nous à -

Fabricant : Koh Young Année de fabrication : 2022 Type de machine : Après AOI - Système automatisé d’inspection optique Les systèmes AOI du poste Koh Young utilisent une imagerie optique 3D haute résolution et des logiciels d’inspection intelligents pour vérifier la qualité des soudures, le placement des composants et l’intégrité de la carte après soudure par refusion. Une station Post AOI est une porte de qualité essentielle dans toute chaîne de production SMT à haute fiabilité, empêchant les cartes défectueuses d’avancer vers l’assemblage final, les tests ou la livraison aux clients. Pour en savoir plus, cliquez ici - / Contactez-nous à -

Fabricant : Koh Young Année de fabrication : 2022 Type de machine : SPI - Inspection de la pâte à souder Pour en savoir plus, cliquez ici - / Contactez-nous à -

Fabricant : REHM Thermal Systems Modèle : VXS Air 3500 (Type 734) Type : Four à soudure à refusion par convection Quantité disponible : 2 unités État : Utilisé Caractéristiques clés - Zones de chauffage : 7 zones de préchauffage / 3 zones de pointe / 4 zones de refroidissement - Contrôle du ventilateur : 1x régulation du ventilateur de chauffage par le dessus - Largeur du circuit imprimé : 55 à 460 mm (avec support central à partir de 65 mm), en option 508 mm - Goupilles de chaîne : nickelées, longueur de culasse standard de 5 mm - Ajustement de la largeur du système de transport : manuel (fonctionnement du pavé tactile électrique) - Chauffage : chauffage par le dessus et par le bas - Affichage : écran plat et lampe de signalisation tricolore - Système de contrôle :

Aperçu du produit : EDA Industries SM 24 FH 150 Description : Le système EDA Industries SM 24 FH 150 est un système de four à brûlage haute performance conçu pour la fiabilité et les tests de contrainte des dispositifs à semi-conducteurs. Ce modèle 2018 est conçu pour simuler des conditions de fonctionnement extrêmes, aidant à identifier les défaillances de la mortalité des jeunes enfants dans les circuits intégrés et les modules d’alimentation avant qu’ils n’atteignent le consommateur final. Caractéristiques techniques : - Fabricant : EDA Industries - Modèle : SM 24 FH 150 (Série SM24 / SP40) - Année de fabrication : 2018 - Application : Burn-in du semi-conducteur / Tests de fiabilité / Durée de vie