sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 103)
Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible.
A Caser-Saimp universal milling machine in need of repair but still operational is offered. Spindle taper: ISO 40, table size X/Y: approx. 1300mm/265mm, travel X/Y/Z: approx. 750mm/265mm/430mm, max. spindle speed: 1700rpm, spindle drive power: approx. 4kW. The X-axis can no longer be moved using the power feed. A servo motor was retrofitted to the X-axis (white assembly). Inspection possible by arrangement.
X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible.
Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine-Manufacturer: Steinel, vertical milling machine type SV 4-Clamping table: 740 x 200 mm-Cross table: 620 x 130 mm-Travel: X/Y/Z 340/100/300 mm-Spindle holder: MK2-Speed: 112 - 2240 rpm right/left rotation-Feed: 0.10 - 0.71 mm/min-Quill stroke: 100 mm-Coolant system-Dimensions: 1000/950/H1830 mm-Weight: 650 kg
A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5124Universal tool milling machineDECKEL FP 4MWorking area: 500 x 400 x 400Drive: 4 kWControl: 3-axis digital display HeidenhainSpindle holder SK 40 / M16Speed range 50-2500 min-1Feed rates 8-630 mm/minRapid traverse 1.3 m/minFixed table 800 x 460 mmChip traydocumentationSpace requirement approx. 2 x 2 x 2 mWeight approx. 1500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 222 mUniversal tool milling machineHERMLE UWF 700Spindle holder SK 40Speed range 40-2000 minSpace requirement approx. 2 x 2 x 2 mWeight approx. 1100 kgFor further data see attached PDFRigid table 700 x 285Horizontal milling machine vertical - milling head enclosed - partially rep. conditionedDocumentationWorking area: approx. 410 x 310 x 400Drive: 2,2Heidenhain digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 - 1600 mmy-travel: 250 - 800 mmz-travel: 350 - 800 mmControl: CNC weight of the machine ca.: 1,6 - 16 tdimensions of the machine ca.: - mMAHO - Package from stock clearance -Special price for sale4 x milling machine-MAHO MH 400 C - CNC 432-MAHO MH 700 C - CNC 432-MAHO MH 800 T - CNC 332-MAHO MH 1600 S - CNC 432EXW - Ex works Bensheim / LorschFree lorry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: - kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,51,52 mNo. 2510Universal milling machine Bridgeport ( type/design )Working area: table 1300 x 305Angle milling head with additional angle milling attachment and separate drive motor.Horizontal spindle MK-4,speed range 26-630 min-1,Angular milling head speed range 225 - 3385 min-1Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min.Space requirement approx. 1.5 x 1.5 m,Weight approx. 1300 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2400 mmy-travel: 1500 mmz-travel: 810 mmControl: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: 7.8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DS Technologie Scharmann ECOSPEED 2600/7800 machine à fraiser haute performance à 5 axes La machine a été spécialement développée pour l’usinage très dynamique des composants structurels en aluminium grand format et fonctionne avec la tête de traitement Sprint Z3 à cinéma parallèle. Le concept de machine combine deux axes linéaires conventionnels avec la tête cinématique parallèle à trois axes pour créer un usinage simultané sur 5 axes. Fabricant : DS Technologie Werkzeugmaschinenbau GmbH Gamme de produits : Scharmann Type de machine : ECOSPEED 2600/7800 Année de fabrication : 2003 Haches : 5 Tête d’usinage : Sprint Z3 Tête de traitement cinématique : Cinématique parallèle Broche de fraisage du moteur : 75 kW Couple de la broche : 72 Nm Vitesse maximale de la broche : 24 000 tr/min Porte-outils : HSK-A63 Poids maximal de l’outil : 10 kg Ou ...
Offered for sale is a WaldrichSiegen CNC portal milling machine for horizontal and vertical milling as well as drilling of large workpieces. Table travel: 14000mm, crossrail saddle travel: 4500mm, crossrail travel: 4000mm, quill travel: 450mm, positioning accuracy of table/crossrail saddle/crossrail/quill: 0.05mm, distance between columns: 4545mm, distance from table to spindle: 4000mm, table size/clamping surface X/Y: 14000mm/4350mm, main spindle motor power: 125kW, main spindle tool interface: ISO SK60, max. table load: 200t, max. point load: 10000kg, control: Siemens 840D, measuring systems: Heidenhain, axis drives: Siemens/Dornhoff. Including an angle-adjustable universal milling head, angle milling heads with installation heights of 800mm/850mm/1400mm, a 1400mm work spindle extension, adapter plates for the work spindle with 400mm/220mm and chip conveyors on the left/right below flo ...
X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clampin ...
Key data: 400 mm, 150 mm, 340 mm
Couvercle FP 1, Année de construction vers 1983 / Révision par Arnold vers 2012 Affichage numérique 3 axes, Voyage X/Y/Z 400/150/340 mm, Taille de la table 600 x 210 mm, Machines à sous en T : 4 T - largeur de rainure : 12 mm Vitesses de broche : 20 - 2000 tr/min Niveaux de vitesse de la broche de travail : 12 Niveaux d’alimentation : 10 Porte-broche : MK 4 Course de plume verticale : 60 mm Poids de la machine environ : 0,8 t
This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details.
This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details.
A universal precision drilling and milling machine by Optimum is available. Speed: 1750rpm, spindle sleeve travel: 120mm, milling head swivel: +/-45°, vertical reach range: 24mm-650mm, horizontal reach range: 0mm-185mm, spindle-to-cross table distance: 60mm-390mm, drilling capacity in steel: 30mm, max. face mill diameter: 100mm, max. end mill diameter: 25mm, cross table dimensions X/Y: 1000mm/240mm, max. table load: 160kg, travel X/Y/Z: 580mm/200mm/340mm, X-axis feed: 720mm/min, machine dimensions X/Y/Z: approx. 1300mm/1100mm/2200mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.
A universal tool milling machine by Friedrich Deckel, overhauled in 2008 and originally built in 1989, is available. Travels X/Y/Z: 560mm/500mm/450mm, table dimensions X/Y: 900mm/530mm, max. table load: 450kg, tool taper: SK40, quill stroke: 80mm, milling head swivel: +/-90°, spindle speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible.
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-20000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1700 NmMain drive 1Drive power (100% DC)40 kWSpeed ...
Remplacement de contrôle nécessaire Ref.Nr. 00936 Désignation du système : fraiseuse NC Fabricant : Friedrich Deckel AG Modèle FP3NC Année de fabrication : 2005 Bacs goutte-à-goutte : sont complètement en dessous de la machine de base, du convoyeur à puces et du distributeur de barres Sans donner des collettes, des accessoires, des outils de la part du vendeur ! État actuellement sur palette en état de démontage Entretien nécessaire Le système de contrôle doit être remplacé Date de soumission à partir de maintenant – au plus tard mi-octobre 2026
Ref.nr. 00937 Nom de la fraiseuse à outils Fabricant : Hermle Modèle UWF 800 HS 57 Année de fabrication : 1995, refonte générale (Investissement d’environ 41 158 euros) Condition fonctionnelle Remarque : Affichage numérique non fonctionnel des valeurs de réglage. Les valeurs de réglage peuvent être lues mécaniquement sur les roues à vis. Boîte d’accessoires : Avec des ensembles de serrage, des extensions d’arbre, des supports, etc. L’affichage numérique des paramètres de réglage ne fonctionne pas. La machine peut sinon être utilisée en plein état de fonctionnement, les paramètres de réglage peuvent être lus manuellement sur les roues de réglage. Des accessoires étendus, y compris des supports, des rallonges d’arbre, etc., sont fixés selon la photo. Le client écrit : Le système est entièrement fonctionnel, sauf que l ...
Données de base de la machine Machine à fraiser CNC 3 axes utilisée de DECKEL Marque : DECKEL Type : FP3-50 Année de fabrication : 1995 Condition : Très bonne – la machine vient de l’atelier d’essai Contrôle : Nom : DIALOGUE 112 Roue à main Déplacement : axe x : 500 mm // axe y : 400 mm // axe z : 500 mm Données techniques : • Broche : 0-5000 tr/min • Table : 800 mm x 480 mm • Interface SK40 • Quill • Cabine • Idéal pour l’entraînement La vente antérieure est réservée. Aucune responsabilité n’est assumée pour les informations techniques fournies ici. Les dispositions légales s’appliquent.
A Unisign CNC 5-axis large-format portal milling machine is available. Portal clearance height: 1200mm, tool stations: 35/53, tool interface: SK50, travel X/Y/Z: 10000mm/2000mm/800mm, table dimensions X/Y: 11750mm/1670mm, max. table load: 2500kp/m², max. table-to-spindle nose distance: 1200mm, main spindle power: 26kW, spindle speed: 6000rpm, feed rate: 24m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 14000mm/5800mm/4000mm, weight: approx. 45t, control: Siemens Sinumerik 840C. Including automatic angular milling head coupling and decoupling, spindle orientation system, rigid tapping, through-spindle coolant, workpiece probing system and two-station pendulum operation. Documentation available. An on-site inspection is possible.
utilisé
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)6,31 x 4,8 x 2,94 mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWMaximum load (table centre)1000 KgDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5850 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Preparation 4th axis EA 510.L indirect (Siemens)Preparation for rotary table (4th axis) Lehmann EA-510.L with indirect measuring system Option includes: - Electrical and pneumatic preparation - Software preparation to work with rotary table - Cycle TRACYL which allows to define contour on the cylinDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive air purge for m ...
This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details.
This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details.
x-travel: 20000 mmy-travel: 2800 mmz-travel: 1050 mmcontrol: Heidenhain 530i taper ISO: 50 P.D.B. spindle speeds: 0 - 2000 mmvoltage: 380 Vtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mATC, 60 pos.Universal vertical headRotary table 2000 x 3000 mmCross travel 1500 mmMax. table load 15 tonThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamTh ...
x-travel: 8000 mmy-travel: 1000 mmz-travel: 1250 mmdividing head: CNC chip conveyor: Universal angular milling head 2-axis adjustable: control: Fagor type: 8025 : CNC clamping plate: 1500x3000 mmclamping plate: 1500x4000 mmclamping plate: 1500x4000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m4-axis controlled sub-machineHandwheelThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look f ...
x-travel: 1600 mmy-travel: 700 mmz-travel: 850 mmcontrol: Heidenhain TNC 407 taper ISO: 50 Table dimensions: 1950 x 650 mmspindle speeds: 80 - 3000 U7minvoltage: 400 Vtotal power requirement: 23 kWweight of the machine ca.: tdimensions of the machine ca.: mCoolantThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution ...
