sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 103)
x-axis: 5000 mmy-axis: 4000 mmz-axis: 1400 mmdistance between columns: 3500 mmspindle motor: 22/26 kWspindle turning speed range: 6000 U/minrapid traverse: 15 m/mintable-size: 5020 x 3000 mmworkpiece weight: 16 tControl: FANUC 0i-iMF distance table - lower edge spindle: 200 - 1600 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m5 Sided Machining Center equipped with:- CNC Control FANUC 0i-MF (10.4 LCD)- ATC 60-fold (BT 50)- Coolant through Spindle- X/Y/Z axis linear guide way- X/Y linear ScalesHeads:-- 90 degree head (auto 5 degree indexing)-- 200mm extension 90 degree head (mounted on table)-- 350mm extension head (mounted on table)- Air conditioner- Oil skimmer- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mmy-travel: 600 mmz-travel: 500 mmNC-rotary table: 630 mmspindle taper: SK 40 spindle turning speed range: 18 - 6300 U/mincontrol: DIALOG 4 feed: 2 - 3600 mm/minrapid traverse: 6 m/mintable load: max. 485 kgquill stroke: 80 mmspindle drive: 9,5 kWtotal power requirement: 20 kVAweight of the machine ca.: 4,6 tdimensions: 3,8 x 2,24 x 2,35 mAccessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 485 mmy-travel: 385 mmz-travel: 380 mmtable surface area: 800 x 460 mmspindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/minfeeds: 10 - 1000 mm/minrapid traverse: 2 m/mintable load capacity: 600 kgquill stroke: 80 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,0 tdimensions: 2,4 x 1,7 x 1,98 mAcc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant- movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X-course : 500 mmy-course : 400 mmz - course : 400 mm, puissance totale requise : 4,4 kW-poids de la machine environ : 2 tDimensions de la machine vers : 222,2 m. Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
course X : 1500 mmy - course : 800 mmz - course : 800 mm - taille de la table : 2,200 x 750 mm roue à main : encre. nombre de vitesses de broche : 3,000 U/min/rpm-entraînement de la broche : 15 kWtool conicité : SK - 50 Contrôle : Heidenhein TNC 426 Puissance totale requise : 30 kWweight de la machine environ : 9,5 tdimensions de la machine vers : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
spindle taper: 2 x SK 40 forward bearing diameter: 110 mmmilling head speed: 100 - 4500 U/minmilling drive: 5,1 kWworkpiece length - max.: 830 mmworkpiece dia. with double equipment: max. 135 mmtaper diameter: 78 g6 mmcentre height: 260 mmturning speed range - stepless: max. 15 U/mindistance of spindles: 135 mmspindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mmFeed speed: max. 6 m/min.surface area: 200 x 1750 mm: tool post (Z-axis): stroke of tool slide: 120 mmFeed speed: max. 2 m/min.column movement: 200 mm: tail stock: tailstock quill stroke: 100 mmmorse taper: 3 MKcentre height: 260 mmaxial distance of the quills: 135 mmpassage of steadyrest: 40 - 80 mmcontrol: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 twith SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolantThe data for this ...
x-travel: 2800 mmy-travel: 1000 mmz-travel: 1200 mmtable surface area: 2000 x 800 mmrotary table dia.: 800 mmspindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/minmax. torque on the spindle: 3000 Nmspindle drive: 30 kWfeeds longditudinal/cross/vertical: 2 - 2000 mm/minrapid motion -longitudinal/cross/vertical: 7 m/mincontrol: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mmwotkpiece diameter with 2 vacant positions: 200 mmworkpiece length: 400 mmweight of tools max.: 16 kgtool changing time: ca. 8 - 9 secinternal coolant system feed: ja / yes total power requirement: kWweight of the machine ca.: 25,4 t= 5-axis CNC-bed-type milling machine with integrated NC-rotary table andNC-swivelling milling head -Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration ...
x-travel: 6.500 mmy-travel: 1.800 mmz-travel: 1.300 mmcontrol: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mmmax. workpiece weight: 13.500 kg/m²Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° HirtverzahnungConstant Power at 100 % ED: 37 kWSpeed range, stepless: 15 - 7.000 min-1max. torque: 1.045 Nmtool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mmworkpiece length: 400 mmweight of tools max.: 20 kginternal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minrapid in X/Y/Z: 35.000 mm/minmax. feed force X-Y-Z-axis: 16.000 Ntotal power requirement: kWweight of the machine ca.: 34 tdimensions of the machine ca. ...
x-travel: 4.700 mmy-travel: 1.250 mmz-travel: 1.500 mmcontrol: HEIDENHAIN iTNC 530 clamping table: - surface area: 5.000 x 1.000 mmmax. workpiece weight: 10.000 kgT-slot number x size: 7 x 22 Abstand 140 mm Universal Milling Head: _ Swiveling area front/back level: automatisch Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 37 kWSpeed range, stepless: 35 - 4.500 min-1max. torque: 880 Nmtool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/240 mmworkpiece length: 300 mmweight of tools max.: 25 kgfeeds: - X-, Y- and Z-axis, stepless: 6 - 15.000 mm/minrapid in X/Y/Z: 25.000 m/minmax. feed force X-Y-Z-axis: 10.000 Ntotal power requirement: kWweight of the machine ca.: 35 tdimensions of the machine ca.: 12,7 x 5,6 x 4,2 mEquipment / Accessories:Heavy-duty bed-type ...
x-travel: 4000 mmy-travel: 2500 mmz-travel: 1300 mmControl: Heidenhain TNC 640 table-size: 4000 x 2500 mmtable load: 10 t/m²spindle turning speed range: 18000 U/mintool taper: HSK A 63 feed: 40.000 mm/minspindle motor: 33 kWA-Axis: +/- 185 °c-axis: +/- 270 °distance between columns: - mmPassage height: - mmtotal power requirement: - kWweight of the machine ca.: 44,5 tdimensions of the machine ca.: - mEquipped with:- Heidenhain TNC 640 CNC control- Tupce universal milling head (2 axes) for 5-axis machining- 80-position tool changer (HSK A63)- Coolant system- CE mark- Enclosure- Measuring head for workpiece measurementThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4.000 mmy-travel: 1.700 mmz-travel: 1.500 mmcontrol: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mmmax. workpiece weight: 10.000 kg/m²T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minOrthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kWSpeed range, stepless: 60 - 6.000 min-1max. torque: 1.500 Nmtool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mmworkpiece length: 400 mmweight of tools max.: 25 kgchanging positions: Horizontal/Vertikal total power requirement: kWweight of the machine ca.: 50 tdimensions of the machine ca.: 11,0 x 6,0 x 4,6 mEquipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via internal Hirth serr ...
x-travel: 5000 mmy-travel: 2500 mmz-travel: 1500 mm: 50 m/min.: 9000/9000/6000 N: 15000 U/min: HSK 100 : 44 / 35 kW: 360 °: +/- 110 °: 5000 x 3000 mmcontrol: Fidia C20 distance between columns: 4500 mmdist. milling spindle - table surface: mmtotal power requirement: - kVA: 38 t: - mUniversal - CNC 5-axis - HIGH SPEED - Portal machining centre inGANTRY design- CNC control FIDIA C 20- Milling head: T2K– Spindle MFW-1813/27/1 (HSK 100)– External coolant supply– Minimum quantity coolant dosing– Scraper conveyor– Ethernet connection– Hand-held control module- 5-position tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 mmy-travel: 350 mmz-travel: 450 mmtable surface area: 940 x 510 mmspindle taper: SK 40 spindle turning speed range: 32 - 1600 U/minfeed - longitudinal/cross: 8 - 400 mm/minfeeds vertical: 4 - 200 mm/mintotal power requirement: 4,5 kWweight of the machine ca.: tdimensions of machine L x W x H: 1,85 x 1,62 x 1,83 mAccessories: vertical head with quill retraction, univ. table, counter bearing, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cone distance min./max.: 0-108 mmPitch angle min/max: 5°/84° Control: GE Fanuc Series 0-GC Pitch diameter (1:1 ratio): 152 mmpitch diameter (10:1 ratio): 216 mmDiametral pitch (finest/coarsest): 1.3/8.5 Mod.Face width gear wheel max.: 35 mmKnife spindle - Speed range: 41-121 U/minworking spindle speed range: 0-33.33 U/minweight: 9025 kgdimensions of the machine ca.: 2707 x 2720 x 2200 mmxmmxmmEquipment/accessories:-Knife-Chip conveyor-Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dymètre de meulage : mm longueur de meulage : mmmax. module : 0min. module : 0 puissance totale requise : kW de la machine environ : espace requis : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Dymètre de meulage : mm longueur de meulage : mmmax. module : 0min. module : 0 puissance totale requise : kW de la machine environ : espace requis : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-course : 4300 mmy-course : 1000 mmz - course : 1700 mmContrôle : TNC430 : : ja Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 124 turning speed range - spindle: 50 - 4.000 U/mintransmission ratio: 2 drive capacity - spindle motor: 6 kWtension force: 10 kNswivellable: manuell +/-45 °max. tool diameter: 125 mmmax. tool weight: 6 kgtable surface area: 400 x 800 mmT-slots: 5x14x80 max. table load: 400 kgfeed speeds: X/Y: 0 - 6.000 mm/minfeed speeds: Z: 0 - 4.000 mm/minrapid traverse: X/Y: 6 m/minrapid traverse: Z: 4 m/mintotal power requirement: 11 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,9 x 3,5 x 2,0 mIncludes:Heidenhain TNC124 point-to-point controlElectrical documentation availableCoolant system2 work lightsMachine viseVarious tool holdersVarious SK40 toolsEnclosure with 2 sliding doors available, pictures to followThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmCNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/mintable-size: 620 x 390 mmtable load: 250 kgpower capacity: 5,5 kWfeeds -stepless-: 2 - 6.000 mm/minquill stroke: 80 mmcoolant: voltage: 380 Vtotal power requirement: 11,0 kVAweight of the machine ca.: 1,65 tdimensions of the machine ca.: 1,85 x 1,90 x 1,80 melectric cabinet: 1,35 x 0,70 x 1,70 m- Serial-No.: 2836-0175- control: DIALOG 11- electrical hand wheel- horizontal milling spindle- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-voyage : mmy-voyage : mmz-déplacement : mmmm Besoins totaux en puissance : kW de la machine environ : espace requis : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-voyage : mmy-voyage : mmz-déplacement : mmmm Besoins totaux en puissance : kW de la machine environ : espace requis : m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Course X : 710 mmY - Course : 250 mmZ - Course : 400 mm - Taille de la table : 1200 x 300 mm Contrôle : Konventionell Adaptateur outil : SK40 Plage de vitesse de rotation : 50 - 2500 U/course minquill : mm Puissance totale requise : 2,2 kWPoids de la machine environ : 1,7 tDimensions : 2,1 x 2,0 x 1,6 m Caractéristiques : - Affichage numérique - Système de liquide de refroidissement - Tête de fraisage Huron - Dispositif d’arrêt d’urgence - Documentation Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-axis: 5060 mmy-axis: 3200 mmz-axis: 1000 mmdistance between columns: 2700 mmspindle motor: 22/26 kWspindle turning speed range: 6000 U/minrapid traverse: 15 m/mintable-size: 5000 x 2400 mmworkpiece weight: 18 tControl: FANUC 31i-MB total power requirement: - kWweight of the machine ca.: 45 tdimensions of the machine ca.: 12,6 x 6,5 x 4,15 m- CNC Control FANUC 31i-MB- Tool Changer 32-fold (BT 50)- 3 axes linear scales- Semi-auto universal head (C axis auto 5 degree indexing)- Extension head- Spindle oil cooler- Air conditioner for electrical cabinet- Hydraulic oil cooler- no coolant thru spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
course X : 500 mmy - Course : 200 mmz - Déplacement : 400 mm Surface de table : 700 x 300 mm Rétrécissement de l’outil : SK 40 - S20 Alimentation : 8 - 400 mm / Rotation minrapide : en X et Z 1200 mm / vitesses de virage minimale : 40 - 2000 U/puissance totale requise : 2,2 kWweight de la machine environ : 1400 kg dimensions de la machine environ : 1500 x 1200 x 1600 mm Inclut un affichage numérique 2 axes Heidenhain Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
x-axis: 6.800 mmy-axis: 4.000 mmz-axis: 1.500 mmControl: iTNC 530 HSCI Heidenhaindistance between columns: max. 5.090 mmdistance spindle center to table: 1.825 mmMain spindle:: type: 175149A-0007 turning speed range - main spindle: max. 19.800 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A63 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °Main spindle:: type: 178099-0005 turning speed range - main spindle: max. 10.020 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A100 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °work table:: table surface area: 6.000 x 3.000 mmmax. table load: 50,0 theight over floor: 100 mmnumber of T-slots: 12 T-slot - width: 28H12 mmT-slot - distance: 250 mmTool-Presetter:: number of toolpositions: 62 (38+24) pos.number of toolpositions: HSK A63: 37+1 pos.number of toolpositions: HSK A1 ...
