sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 103)
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Fraiseuse et perceuse DECKEL MAHO DMU 80 T Avec contrôle de voie Heidenhain iTNC 530 Année de fabrication : 2002 Voyage : X 880 Y 630 Z 630 Plage de vitesses : 0 – 18 000 tr/min variable à l’infini (SK 40) Avec les accessoires suivants : Table rotative NC 0 700 mm intégrée à une table rigide à angle 1250 mm x 700 mm Surface de serrage Changeur d’outils vertical avec 32 positions de chargeur (SK 40) Cabine à protection totale avec portes coulissantes et éclairage intérieur Volant électronique Mode de fonctionnement 3 + 4 Convoyeur à vis spirale Installation du liquide de refroidissement Chaussures machine ajustables en hauteur en 3 pièces Refroidisseur d’huile pour broche Unité de refroidissement de l’armoire de contrôle (Rittal) Instructions d’utilisation
à vendre est une MAHO600E qui n’est actuellement pas en cours car le comité d’urgence signale une erreur (ERR 0 23, M 02).
• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm• Incl. 3-axis digital readout manufactured by HEIDENHAIN
• Table with 7 slots• Incl. 3-axis digital readout manufactured by HEIDENHAIN
Attention: without the machine vises seen in the photos!• incl. three axis digital read out• incl. universal milling head
This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details.
This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.
This 4-axis HELLER MCI 16 was manufactured in 2004. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a spindle power of 38 kW. The machine includes a tool magazine capacity of 40 pockets and a rotary table with a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 horizontal machining centre we have for sale. Contact us for further details.
This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details.
This 3-axis HEDELIUS BC 60 was manufactured in 1999. It features a robust machine structure with a moving column and dual-workspace setup, ensuring efficient operation. The CNC control unit is Siemens (SINUMERIK), and it includes additional equipment such as a chip conveyor and hydraulic/coolant unit. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 60 vertical machining centre we have for sale. Contact us for further details.
À vendre une fraiseuse à copier du célèbre fabricant italien FOM, construite en 2006. La machine a été révisée à l’usine. Dans le cadre de la révision, la machine a été complètement démontée et toutes les pièces nettoyées individuellement. La plaque de support a été meulée et galvanisée. De nombreuses autres pièces ont également été regalvanisées. Certaines pièces ont été repeintes. Les roulements du moteur ont été remplacés, tout comme ceux de la broche de fraisage. De plus, une nouvelle courroie et une nouvelle jambe de gaz ont été installées. Caractéristiques techniques selon le fabricant : - Broche à double vitesse - Broche à verrouillage rapide pour faciliter le changement d’outil - Dispositifs de serrage horizontal - Modèle de copie - Arrêts en plongée - Stylo à copier à commande pneumatique de 5 et 10 mm de diamètre - ...
x-travel: 800 mmy-travel: 340 mmz-travel: 460 mmControl: Fanuc total power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fraiseuse Paulimot SX4 avec affichage numérique et cadre de base À vendre une fraiseuse Paulimot SX4 en parfait état et parfaitement fonctionnel. La machine est idéale pour les ateliers, la fabrication de maquettes, la production de prototypes ainsi que pour les travaux exigeants pour les loisirs et les petites séries. Grâce à sa construction stable et à son affichage numérique, le SX4 permet un travail précis et confortable sur l’acier, l’aluminium, les plastiques et de nombreux autres matériaux. Équipement : Fraiseuse Paulimot SX4 Affichage numérique / système de mesure numérique Sous-structure de machine stable Contrôle de vitesse sans pas Fonction de forage et de fraisage Cadre de base Prêt à l’emploi Données techniques : Taille de la table : environ 820 x 240 mm Voyages : Axe X : 450 mm Axe Y : 250 mm Axe Z : 320 mm Porte-broc ...
This 3-axis Emmegi Phantomatic T3 was manufactured in 2011. It features a power rating of 7.5 kW and operates at a voltage of 400/3 V. With a machine weight of 1950 kg, it is designed for durability and efficiency. If you are looking to get high-quality machining capabilities, consider the Emmegi Phantomatic T3 vertical machining centre we have for sale. Contact us for further details.
This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details.
Vitesse : 12 000 tours par minute Serrage pneumatique du matériau via un interrupteur au pied Dispositif de pulvérisation en quantité minimale Surface de fraisage : 300 x 120 mm Course : 115 mm Poids : environ 200 kg
A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible.
Travel X/Y/Z: 850mm/435mm/210mm, vertical head adjustment: approx. 590mm, table dimensions X/Y: approx. 1570mm/500mm, max. table load: 250kg, spindle taper: Fehlmann SF32, max. spindle speed: 7100rpm, spindle power: approx. 5kW, drilling capacity in steel: 30mm, tapping capacity in steel: M20, control: Mach3 with touchscreen PC, weight: approx. 3000kg. The machine was subsequently retrofitted with a Mach3 control. An on-site inspection is possible.
This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details.
utilisé
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - ...
utilisé
GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,82 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring syste ...
utilisé
GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDir ...
