sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 103)
Travel X/Y/Z: approx. 1600mm/400mm/425mm, table dimensions X/Y: 1500mm/400mm, tool holder: SK40, tool positions: 20, spindle speed: 5000rpm, machine dimensions X/Y/Z: approx. 4000mm/2500mm/2900mm, weight: approx. 7000kg, control: Siemens Sinumerik System 3, operating hours: approx. 19855h. Including approx. 12 tool holders. Documentation available. An on-site inspection is possible.
A 5-axis CNC milling machine Geiss with full encapsulation is available. Travel X/Y/Z: 2500mm/2200mm/760mm, tool holder: ER25, spindle power: 11kW, milling head type: orthogonal milling head, control: Siemens Sinumerik 840 Di solution line. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible.
A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible.
This 3-axis Röders TEC RHP 500 was manufactured in 2006. It features a high spindle speed of 42,000 rpm and a tool magazine capacity of 42 slots. The machine is equipped with hydrostatic X, Y & Z axes and includes a coordinate grinding package. If you are looking to get high-quality machining capabilities, consider the Röders TEC RHP 500 vertical machining centre we have for sale. Contact us for further details.
table-size: 1300 x 280 mmtravel -x axis: 950 mmtravel -y axis: 300 mmtravel -z axis: 450 mmspindle speed:: 60–3.000 U/min : 16 spindle taper: NT40 quill stroke: 140 mmautomatic feeds: 13–600 mm/mi rapid traverse: 2.500 mm/min m/mintable load: max. 250 kgweight of the machine ca.: 2040 kgdimensions: 2.450 × 1.800 × 2.370 mmThe machine is equipped with a digital position display, a machine vise, a swiveling vertical milling head, and several mechanical feed drives.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 630 mm, 500 mm, 500 mm
Contrôle : Nom : Heidenhain Données techniques : • Broche : 20-7000 tr/min • Tableau : 900 mm x 528 mm • Interface SK40 • Quill • Semi-cabine La vente antérieure est réservée. Aucune responsabilité n’est assumée pour les informations techniques fournies ici. Les dispositions légales s’appliquent.
Centre d’usinage CNC HURON VX8 – Année 2015 À vendre un centre d’usinage vertical CNC HURON VX8, construit en 2015, avec commande Heidenhain TNC 620. La machine est en très bon état général, a été testée en atelier et est alimentée. Avec une vitesse de broche allant jusqu’à 12 000 tr/min, un changeur d’outils 24 fois et une large gamme d’accessoires, la machine propose un équipement solide pour des opérations de fraisage exigeantes. Données techniques Fabricant : HURON Modèle : VX8 Année de fabrication : 2015 Contrôle : Heidenhain TNC 620 Heures moteur ALLUMÉES : 22 873 h Durée du programme : 6 968 h Course X : environ 820 mm Course Y : environ 510 mm Course Z : environ 510 mm Traversée rapide : environ 24 m/min Surface utilisable de la table : environ 1 000 × 530 mm Charge autorisée à table : environ 500 kg Vitesse de ...
This 3-axis Hurco VMX 42 was manufactured in 2006. It features a tool tray with 24 positions, a chip conveyor, and a coolant tank with pump. Operating hours total 22,612.4, with spindle hours at 6,344.2. Consider the opportunity to buy this Hurco VMX 42 vertical machining centre. Contact us for more information.
This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details.
This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details.
This 3-axis HERMLE UWF 1202 H was manufactured in 1994. It features an automatic tool changer and a robust net weight of 5,700 kg. The machine is equipped with a HEIDENHAIN CNC control and an enclosed linear encoder with a measuring length of 620 mm. If you are looking to get high-quality universal machining capabilities, consider the HERMLE UWF 1202 H machine we have for sale. Contact us for further details.
This 3-axis HERMLE UWF 802 M was manufactured in 1995. It has a total power rating of 6 kVA and operates at a voltage of 400 V. With a net weight of 1800 kg, this universal machining centre is designed for versatility in various machining applications. If you are looking to get high-quality machining capabilities, consider the HERMLE UWF 802 M machine we have for sale. Contact us for further details.
utilisé
GeneralUniversal Milling Machine; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Benefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe) Spindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp ...
utilisé
GeneralVertical Machining Center; Control: Control M730UM with CELOS CharacteristicsTable surface1350 x 600 mmMaximum load (table centre)1200 KgSpeed max.12000 rpmDrive power (100% DC)22 kWDrive power (25% DC)37 kWTool Magazine with30 PositionsSpindle taperBT 40 Movement X / Y / Z1050/530/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,02 x 2,98 x 2,61 mWeight approx.7000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p High-torque spindle 12,000min-1, 37/ 22 kW (#40)High-torque Spindle 12,000 min-1, 37/22 kW (#40) Motor spindle powerMASTER® Spindle speed: 12,000 min-1 Output: 37/22 kW (50/30 HP) (10%ED/cont) Torque: 360/177 Nm (265.52/ ...
utilisé
GeneralHorizontal machining center; Control: Siemens S840Dsl with CELOS CharacteristicsSpeed max.-20000 rpmDrive power (100% DC)25 kWDrive power (40% DC)42 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/660 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperHSK-A 63 Max. tool length450 mmDimensions (L x W x H)2,68 x 4,19 x 2,54 mWeight approx.8500 KgPreparation for Center Through-spindle coolant systemCenter Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life. Spindle Taper HSK-A63Spindle Taper HSK-A63 This specification u ...
utilisé
GeneralHorizontal machining center; Control: Siemens S840Dsl with CELOS CharacteristicsSpeed max.-15000 rpmDrive power (100% DC)30 kWDrive power (40% DC)46 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/660 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperHSK-A 63 Max. tool length450 mmDimensions (L x W x H)2,68 x 4,19 x 2,54 mWeight approx.8500 KgHigh-torque spindle 46 /30 kW, 15,000 min-1High-torque spindle 46 /30 kW, 15,000 min-1 (SIEMENS) Preparation for Center Through-spindle coolant systemCenter Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining po ...
utilisé
GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperBT 50 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with ...
utilisé
GeneralHorizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS CharacteristicsSpeed max.-12000 rpmDrive power (100% DC)30 kWTable size630 x 630 mmSwivelling range360 x 1 degreeMaximum load (table centre)1500 KgMax. work piece diameter1050 mmMax. work piece height1300 mmPalett changer with2 PalletMovement X / Y / Z1050/900/1030 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with120 PositionsSpindle taperHSK-A 100 Weight approx.18750 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control ...
KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces.Travel paths of 4,000 x 2,700 x 1,200 mmand a large worktable of approximately 4,000 x 1,800 mmwith a table load capacity of 10,000 kg enable the machining of large-volume components.The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled).Hirth gearing ensures precise angle settings.Powerful main spindle drive with approximately 30 kW.Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm.Additional equipment includes a 60-tool changer (KWE60),Chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication.Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per axis underscore the r ...
A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.
This 3-axis FEHLMANN PICOMAX 80 CNC-W 2/3 was manufactured in 2005. It features a spindle speed range of 50 - 9,200 rpm and a maximum torque of 80 Nm. The machine offers a travel of 700 x 315 mm in the X and Y axes, with a vertical adjustment of 495 mm. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 80 CNC-W 2/3 vertical machining centre we have for sale. Contact us for further details.
Contrôle Heidenhain TNC 124 Débat X/Y/Z : 500 x 400 x 400 mm Vitesse de la broche 4 500 min-1 Porte-outils SK 40 Table rotative manuelle avec axe pivotant 700 x 500 mm
Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: IROX, compact clamps -Type: Tension fix -Quantity: 1x tensioner available -Dimensions: 150/45/H110 mm -Weight: 1.8 kg
Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: IROX, compact clamps with clamping element extension -Type: Tension fix / Stage 1 -Quantity: 1x tensioner available -Dimensions: 150/45/H170 mm -Weight: 2.4 kg
Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Lenzkes, Compact Clamp Monobloc -Type: L20 220-10 -Quantity: 1x tensioner available -Dimensions: 220/50/H90 mm -Weight: 2.2 kg
À vendre est une fraiseuse à encoches rénovée en atelier du célèbre fabricant Elumatec, type AF223, construite en 1998. Dans le cadre de la révision de l’atelier, la machine a été démontée, nettoyée et remontée. Elle a été presque entièrement repeinte. Les roulements de la broche et du moteur ont été remplacés. La plaque a été poncée et galvanisée professionnellement. D’autres pièces galvanisées ont également été largement regalvanisées. Les nouvelles pièces suivantes ont été installées : - Cylindres pneumatiques - Rails guides et couches linéaires - Cylindres de serrage et tampons en caoutchouc - Couverture protectrice - Couvercle articulé - Garde-boue - Glisseurs protecteurs à droite et à gauche - Coulissante protectrice sur le côté avec un pinceau - Levier à l’arrêt - Levier sur la broche avant - Paliers sur la broche ...
Fraiseuse universelle CNC HERMLE U 630 T Avec contrôle de piste Heidenhain TNC 426 Année de fabrication : 1998 Voyage : X 630 (875) Y 500 Z 500 Plage de vitesse : 20 – 7 000 tr/min variable à l’infini Avec les accessoires suivants : Table rigide à angle de 900 mm x 528 mm surface de serrage Changeur d’outils vertical avec 16 positions de chargeur Cabine à protection totale avec portes coulissantes et éclairage intérieur Volant électronique Sonde 3D Heidenhain Installation du liquide de refroidissement 4 M réglables en hauteur
FOOKE ENDURA 83.1 Fraiseuse à portail La FOOKE ENDURA 83.1 est une fraiseuse à portail CNC à 5 axes avec trois axes linéaires X, Y, Z et deux axes rotatifs A et C. La surface de serrage se compose de deux tables de machines de 3 200 mm x 1 000 mm chacune. Une unité de broche supplémentaire, toute neuve, du fabricant SPL est incluse dans le champ de distribution. Année de construction : 2003 Contrôle SIEMENS SINUMERIK 840D Débat X - 3 500 mm / Y - 2 500 mm / Z - 1 200 mm / A - ± 120 / C - 365 Traversée rapide axes X/Y/Z jusqu’à 20 m/min Vitesse de rotation : axe de la climatisation jusqu’à 15 tr/min Équipement : La broche HSK 63A fabrique SPL, type/DRF-FO-180M-W-16-34 avec 34 kW jusqu’à 16 000 tr/min. Changeur d’outils pour 20 outils / diamètre jusqu’à 100 mm Refroidissement interne IKZ jusqu’à 30 bars Refroidissement de la broche Sy ...
