Fabricant:
(Catégorie: 709)
Moteur d’un séparateur Cream (écumeur), GEA Westfalia SAMM 20006. Puissance du moteur : 30 kW - 380 V - 59 A - 1,470 tr/min - 50 Hz - 3 Ph. Rotor : DS5. I.CI. F. IP 55. Poids : 255 kg., Type de machine : Séparateur de crème moteur / écumeur, Puissance moteur : 30 kW - 380 V - 59 A - 1,470 tr/min - 50 Hz - 3 pH
Cream separator (Skimmer) for separation of milk or whey. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, cyclone sludge tank, base plate, feet, watervalves (original Westfalia), main control cabinet with frequency converter (ABB) and control panel with Allen-Bradley SLC 5/03 CPU Processor and Allen Bradley PanelView 1000. Controls upgraded in 2008 by GEA Westfalia. Endress + Hausser Promass 83 Flowmeter., Type of Machine: Cream Separator, Capacity: 35.000 liter per hour, Bowl speed: 4.800 rpm, Motor: 45 kW - 460 V - 74 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 3.300 kg, Dimensions: 210 x 125 x 235 cm
Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg
Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...
Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...
The GEA Westfalia CA 365-010 is a two-phase horizontal stainless steel decanter centrifuge (liquid + solids separation). It’s a continuous, high-G, conveyor (scroll) decanter used in food, oil, wastewater and chemical applications. Previously it is used as a fine decanter in a casein plant (foood industry). Diameter bowl: 365 mm. Diameter scroll 354/205 mm. Bowl speed: 4.000 rpm. Solids: 2.0 kg/dm3. Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A. Including hydraulic unit (Viscotherm AG, Pump-unit, C18.5-28.2Z/LP-W-50/10, year 2015, motor 18,5 kW, max pressure 170 Bar)., Type of Machine: Decanter, Diameter: 354 / 205 mm, Bowl speed: 4.000 rpm, Solids: 2.0 kg/dm3, Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A, Weight: 2.400 kg, Dimensions: 240 x 150 x 185 cm
The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/27 rpm or 1600/34 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...
Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm
The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/25 rpm or 1600/30 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...
Séparateur de crème (écumeur). Auto-nettoyage. La machine est livrée avec la cuvette, le moteur (18,5 kW), le couvercle du moteur, la plaque de base avec 2x pieds (2 manquants), des vannes d’eau (Westfalia d’origine), un panneau de contrôle incluant le panneau d’exploitation GEA d’origine, tous les tuyaux d’entrée/sortie avec pompes, un indicateur de débit, une vanne de contre-pression et des outils de maintenance incluant un outil de repassage. Type de machine : séparateur de crème / écumeur, capacité : 10 000 litres par heure, Vitesse de la cuvette : 5,920 tr/min, Moteur : 18,5 kW - 380 V - 38 A - 1,465 tr/min - 50 Hz - 3 Ph, Poids : ± 1,700 kg, Dimensions : 200 x 110 x 180 cm
Aerator (alias whipping machine, foam producer, foam generator, industry mixer) for manufacturing foam for a wide range of different products. The heart of the machine is the mixing head, the „inline axial flow mixer. This mixing head consists of a rotor and a stator, which are equipped with many pins to guarantee a precise rotation. A liquid or pasty medium is transported preciseley through the pump. At the entrance of the mixing head, nitrogen is proportional dosed to the product quantity. Due to the rotation of the mixing head, nitrogen bladders are consistently distributed. The foam can be take from at the exit of the mixing head. The end product is a whipped mass which is now ready for filling. Mixing head type AERO 4.0 / 1368 square pin. For productions up to 4.000 l/h (product-dependent). Motor: 400 V - 19 kW - 39 A - 50 Hz. Stainless steel free standing control panel with Sieme ...
Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...
Koch Membrane Systems (GEA Tuchenhagen computer designed) Ultra Filtration (UF) plant for continuous circulation / concentration / filtration and the production of double cream cheese (philadelphia style). Once the plant is running continuously with ratio control, no manual interventions are generally necessary for the production of the UF concentrate. However, for optimal production of consistent quality, strict adherence to various prerequisites is necessary, e.g. regarding cleaning., The Ultra Filtration line exist out:, - Level tank, 750 liter., - Product feed pump (P1), Tuchenhagen VPB 32 L, 5.000 ltr/h, 39 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - Permeate pump (P2), Tuchenhagen VPB 32 L, 5.000 ltr/h, 35 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - CIP pump (P3), Tuchenhagen VPD 51, 110.000 ltr/h, 8 mWs, motor 7,5 kW - 1.450 rpm - 380 V - 50 Hz., - Circulation pump stage 1 ...
The dynamic in-line flow mixer type RM offers performance, precision and hygiene for the food, chemical and plastics processing industries and for numerous other process mixing processes.The performance spectrum of the dynamic flow mixer RM includes stirring, mixing, gentle mixing and blending, reacting, diluting, coloring, homogenizing and much more. Drive with tubular housing and mixing shaft running therein. Welded mixing elements. Mechanical seal. Vertical design with foot flange. It is a dynamic flow mixer that is suitable for CIP (Cleaning in Place). Capacity: up to 4.000 ltr/h. Lenght of the rotor: 425 mm. Inside diameter of the house 130 mm. Connections in / out: DN65. Motor: ± 3 kW (not visible on nametag) - 400 V - 50 Hz., Type of Machine: Inline mixer, Capacity: up to 4.000 ltr/h, Length of rotor: 425 mm, Inside diameter of the house: 130 mm, Motor: ± 3 kW (not visible on na ...
Broche à cuvette inutilisée pour un séparateur SGV Alfa Laval MRPX 409, Type de machine : broche à cuvette, ligne de transmission : 50 Hz
Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate, feet, desludge cyclone, control panel (original Alfa Laval), OWM valve with waterbox (original Alfa Laval), all inlet/outlet pipes, service tools for maintenance including pressing tool. Instruction manual available., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 4.950 rpm, Motor: 22 kW - 380 V - 60 Hz - 1.750 rpm - 40 A, Dimensions: 180 x 130 x 175 cm, Weight: 2.130 kg
Kit de rénovation inutilisé pour une vanne pneumatique de régulation pneumatique Alfa Laval CPM CPM Full-Pressure Modulation (CPMI-2). Kit de service pour pièces originales CPMI - 2/XPMO - 2 NBR supérieur, EPDM/PTFE inférieur, pièce n° 9611920218., Type de machine : Vanne à modulation à pression constante, Art. N° : 9611920218
Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403
This incomplete APV Rannie Blue Top 30.56 homogeniser is a 3-cylinder machine which is designed for 1.650 liter per hour with a maximum pressure of 300 bar. The machine is without a current main motor. The homogensier is equipped with 2-stages but without the valve cylinders / pressure adjustment handles. Piston diameter 42 mm. Oil pumping system inside the machine. Stainless steel cladded (not all covers available)., Type of Machine: Homogeniser, Capacity: up to 1.650 liter per hour, Stages: 2 stages, Max. Pressure: 300 bar, Piston diameter: 42 mm, Motor: No motor, Dimensions: 133 x 90 x 155 cm, Weight: 900 kg
This APV Gaulin 79 MC 2-5TBSX aseptic homogeniser is a 3-cylinder machine which is designed for 300 liter per hour with a maximum pressure of 340 bar. The homogensier is equipped with 2-stage with ball valve cylinder, manual controlled. Manometers. Motor: 5,5 kW - 380/420 V - 13,5 Amp - 50 Hz - 950 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 300 liter per hour, Stages: 2 Stages, Max. Pressure: 340 bar, Valve cylinder: Ball valves, Product: Milk, Piston diameter: 18 mm, Motor: 5,5 kW - 380/420 V - 13,5 Amp - 50 Hz - 950 rpm, Dimensions: 120 x 80 x 125 cm, Weight: 400 kg
Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (± 37 kW, no nametag on the motor), motor cover, base plate with feet, water valves (original Westfalia), control panel, all inlet/outlet pipes with pumps, flow indicator, manual counter pressure valve, manometer and service tools for maintenance including pressing tool., Type of Machine: Cream Separator / Skimmer, Capacity: 30.000 liter per hour, Bowl speed: 4.700 rpm, Motor: ± 37 kW - 400 V - 50 Hz, Weight: 2.150 kg, Dimensions: 205 x 111 x 180 cm
Séparateur de crème (écumeur). Auto-nettoyage. La machine est équipée de la cuvette, du moteur (22 kW), du couvercle du moteur, de la plaque de base, des pieds, des vannes d’eau (Westfalia d’origine) et des tuyaux d’entrée/sortie. Fonctionnalités supplémentaires : : Excluant : - Soupape CPM pour la régulation de pression, - Panneau de contrôle, - Outils de maintenance pour l’entretien. Type de machine : séparateur à crème / écumeur, Capacité : 20 000 litres par heure, Vitesse de la cuvette : 4 500 tr/min, Moteur : 22 kW - 380 V - 42,5 A - 1,460 tr/min - 50 Hz - 3 Ph, Poids : ± 2,300 kg, dimensions : ± 190 x 112 x 220 cm
This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg
The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...
Séparateur de crème (écumeur). Auto-nettoyage. La machine est équipée de la cuvette, du moteur (15 kW), du couvercle du moteur, du cyclone, de la plaque de base, des pieds, de la boîte à eau avec vannes d’eau, de tuyaux d’entrée et de sortie avec manomètres et outils de maintenance pour l’entretien. Fonctionnalités supplémentaires : À l’exception : Panneau de contrôle, Type de machine : Séparateur de crème / écumeur, Capacité : 12 000 litres par heure, Vitesse de la cuvette : 4,450 tr/min, Moteur : 15 kW - 380 V - 50 Hz - 1,450 tr/min - 30 ampères - 3 Ph, Poids : 1,550 kg, Dimensions : 145 x 110 x 175 cm
This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...
Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...
APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Powder dissolver, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system la ...
Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool. , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm
Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h since major service, Dimensions: 3,55 x 1, ...
