subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 109)
Auction-ID: A7-45427-195
Auction-ID: A7-45427-171
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW
diameter: 2-23 mmlength: 4200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Frech Model: DAK 315S Year of Manufacture: 1996 Type of Machine : Cold Chamber Die Casting Machine Control System: Frech DataControl Shot Count: At least 1,147,108 (indicative, hardware change recorded) Condition: Fully production-ready, currently still connected and operational Included: Striko Westofen W455 holding furnace Technical Specifications - Clamping Force: 3,150 kN - Opening Force: 10,000 daN - Closing Stroke: 500 mm - Adjustable Opening Stroke: Yes - Ejector Force / Retraction Force: 159 / 82 kN - Ejector Stroke: 120 mm - Die Height Min-Max: 300 - 700 mm - Platen Size: 900 x 900 mm - Tie Bar Spacing: 550 x 550 mm - Tie Bar Diameter: 110 mm - Injection Position: 0 / -80 / -160 mm - Maximum Injection Force: 350 kN - Injection Stroke: 430 mm - Shot Sleeve Diameter: 50 / 60 / 70 / 80 mm - Shot Volume: 563 / 811 / 1103 / 1441 cm3 - Specific Injection Pressu ...
Manufacturer: Schuco Model: AS100 Throughput Center Year of Manufacture: 2020 and 2022 Type of Machine :CNC 5-Axis Machining Center Layout Version: MA6 Machine Dimensions - Total Length: 22,300 mm - Total Width: 7,123 mm - Total Height: 3,058 mm - Machining Zone Width: 5,357 mm - Loading/Unloading Magazine Width: 7,500 mm - Magazine Depth: 1,766 mm Connections Required - Power supply (electrical connection) - Compressed air - Network connection - All connections to be provided from above Key Features - Two fully equipped 5-axis machining towers - Five self-driven clamping vices - Combined loading and unloading magazine - Profile buffer capacity: up to 12 profiles lying flat, up to 16 profiles standing - Unmanned operation capability for up to 16 profiles - Six-sided profile machining - Variable gripper system compatible with all profile geometries - Integrated saw station and n ...
Manufacturer: Schuco Model: PBX AL Year of Manufacture: 2003 and 2008 Type of Machine : CNC Machining Centre Control System: Schuco-CAM with Windows operating system A-Axis: Continuous rotation from +90 to -90 degrees via servo axis Machining sides: 3-sided profile machining without reclamping Technical Specifications - Number of CNC Axes: 4 - Machining Length: 7,200 mm - Simultaneous Profile Capacity: up to 6 bars (optionally up to 8 bars) - Clamping Vices: 6 automatic, designed for double-bar machining (optionally 8) - Profile Stops: 2 pneumatic (optionally 3) - Machining Width - Front Bar: 250 mm - Machining Width - Rear Bar: 120 mm - Machining Height: 200 mm - rive Motor Power: 5.5 kW - Spindle Speed Range: up to 18,000 rpm - Motor Power from: 5.5 kW at 7,000 rpm - Tool Holder: SK 30 - Max. Disc Cutter Diameter: 120 mm - Max. End Mill Diameter / Length: 50 mm / 160 mm - Trav ...
CNC vertical machining center Type: DMC 64 V Manufacturer: Deckel Maho Year: 2002 Control: Heidenhain iTNC 530 X: 640 mm Y: 600 mm Z: 500 mm Spindle speed: 12000 rpm Spindle cone: SK40 Tool magazine: 30 positions Table: 850 x 600 mm Max table load: 600 kg Replacement of the X-axis linear position sensor in 2025 Machine in good condition, fully functional, under power Find more here - / Contact us at -
Manufacturer: Pinacho Model: SP/250 Machine Type:Lathe Year of Manufacture: October 2002 CE marked Find more here - / Contact us at -
Machine 1 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2000 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: October 2018 Machine 2 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2003 - Loading Magazine: LNS Tryton 112 Machine 3 - Manufacturer: Tornos - Type: DECO 7mm - Control: Fanuc ITA - Year of Manufacture: 1999 - Machine Number: T-63034 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: June 2019 General Condition - All machines are fully functional with no technical defects - All machines are currently running in a medical device production line Find more here - / Contact us at -
Alimentador de rodillos ALBA, tipo UVHY 400, fabricado en 1989 Panel de control ALBA con gabinete de control Plancha Heilbronn, tipo RMG 7/500/80 (con 9 rodillos) Carrete Heilbronn, tipo HAEM2000/500, ancho de lámina hasta 400 mm, 3-4 toneladas incluyendo unidad de potencia hidráulica Auction-ID: A7-45388-1
Auction-ID: A1-45406-78
: neu : 2024 : 9721 : prompt, Zwischenverkauf v : Italien : 7780 €: 150.15 €: 1 : 1 : 42 mm: 400 mm: 570 mm: 1000 mm: 80 kg: 4 cm³: 42 x 3 mm: 48 x 1,5 mm: 42 x 4 mm: 42 x 2 mm: 42 x 2 mm: 50 x 3 mm: 54 x 2 mm: 54 x 2 mm: 60 x 2 mm: 50 x 4 mm: 30 mm: 40x20 (liegend), 40x12 (s mm: 260 mm: 10 mm: 3,3 U/min: 1.1 kWmanual clampingelectronic preselection of bending angledigital read our for Clamping position30 programms with each 9 bendsmaterial spring back compensationoverload protectionmobile by rolls and handlefoot pedaltools not includedAlternatively also available as following models (prices on request):MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-45406-79
: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 €: 209.28 €: 60 mm: 595 mm: 363 mm: 900 mm: 130 kg: 10.5 cm³: 60 x 3 mm: 2Gas x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 4 mm: 60 x 4 mm: 64 x 4 mm: 64 x 4 mm: 60 x 4 mm: 50 x 4 mm: 35 mm: 60x30x4 stehend, 60x40x5 mm: 300 mm: 10 mm: 10 mm: 1,25 / 2,50 U/min: 1.5 kWdigital read out for bending anglemanual clampingmaterial spring back compensationdigital read out and zero setting for clamping point2 speedsoverload protectionmobile by rolls and handletools not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 €: 239.23 €: 60 mm: 500 mm: 760 mm: 1000 mm: 186 kg: 10 cm³: 60 x 4 mm: 2 x 3,91 mm: 60 x 4 mm: 60 x 2 mm: 60 x 3 mm: 60 x 6 mm: 64 x 6 mm: 64 x 6 mm: 63 x 4 mm: 50 x 4 mm: 35 mm: 35 x 35 mm: 60 x 20 stehend, 60 x 35 mm: 380 mm: 10 mm: 10 mm: 1,5 / 3 U/min: 1.5 kWquick-change tooling systemdigital display of bending anglematerial spring back compensationfoot pedal for hands-free operationaccurate counterbending die positioningusers manualtools not included, priced on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 €: 555.81 €: 100 mm: 500 mm: 1200 mm: 850 mm: 480 kg: 43 cm³: 100 x 6 mm: 3 1/2 x 4 mm: 100 x 6 mm: 100 x 3,6 mm: 100 x 3,6 mm: 114,3 x 6,3 mm: 114,3 x 6,3 mm: 114,4 x 6,3 mm: 88,9 x 3,65 mm: 100 x 5 mm: 70 mm: 100 x 25 stehend, 100 x 5 mm: 400 mm: 36 mm: 10 mm: 0 - 1,3 U/min: 3.5 kWquick-change tooling systemdigital display of bendmaterial spring back compensationremote control of bend, return and emergency stop functionsaccurate counterbending die positioningfootswitch3 hexagonal tool holdersheavy-duty steel gear caseusers manaultools not included, prices on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 €: 2009.83 €: 150 mm: 1000 mm: 1900 mm: 1475 mm: 2700 kg: 170 cm³: 150 x 7,1 mm: 6 x 7,11 mm: 150 x 9 mm: 141,3 x 6,55 mm: 141,3 x 6,55 mm: 168,3 x 9 mm: 168,3 x 9 mm: 64 x 6 mm: 88,9 x 3,65 mm: 110 mm: 150 x 45 stehend, 150 x 6 mm: 800 mm: 100 mm: 10 mm: 1 U/min: 15 kWTCPlus Control with 7 TouchscreenProgrammable bending speed for each individual bendPossibility to bend left and rightUsers manaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 €: 180.26 €: 48 mm: 570 mm: 410 mm: 1000 mm: 110 kg: 6 cm³: 48 x 3,5 mm: 11/2 x 3.68 mm: 54 x 1,5 mm: 50 x 4 mm: 48 x 2 mm: 48 x 2 mm: 60 x 3 mm: 64 x 2 mm: 64 x 2 mm: 60 x 2 mm: 50 x 4 mm: 32 mm: 45 x 16 stehend, 45 x 25 mm: 300 mm: 10 mm: 10 mm: 2/3 U/min: 1.5 kW3 phasedigital display of bendmaterial spring back compensationquick-change tooling system2 hexagonal tool holdersaccurate counterbending die positioningportable with base wheelsfootswitchusers manualALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST):SB 48M (single phase, 2 r/min) Model with TCPlus control on requestMACHINE-KIT WITH TOOLS (PRICES ON REQUEST):Art.Nr.maschinetuberadiusSB 48M K2DSB 48MGas inch2 x ØSB 48T K2DSB 48TGas inch 2 x Øtools:Ø 1/2", (21,3 mm), R46Ø 3/4", (26,9 mm), R56Ø 1", (33,7 mm), R67Ø 1", 1/4 (42,25 mm), R90 ...
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 8700 €: 167.91 €: 10000 kg: 5000 to: 750 mm: 4500 mm: 300 mm: 2 x 70 mmConventional rotating fixtures are preferred in areas such as welding, painting and paint preparation,due to their cost-effective design and ease of integration.They are manufactured as standard with capacities ranging from 1 to 150 tons.Roller material: PolyurethaneCapacities up to 500 tons are also possible upon request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 €: 916.8 €: 6 mm: 4 mm: 70 mm: 4000 mm: 550 mm: 8.75 kW: 4250 mm: 720 mm: 2000 mm: 2015 kgEasy operation with mobile control panel with push buttonsBuilt according to EC Safety Directives and has CE MarkOne set of flanging rolls included. Radius can be selected.One set of cutting blades includedMin. cutting diameter: 600 mm (with adapter for small diameter 400 mm)Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm)Rotating speed 70 rpm with adjustable max. torqueTop and bottom flanging rolls powered in rotation with planetary reducersHydraulically adjustable bottom head for both, flat and crowned dish flangingBoth cutting and flanging operation on the same headUsers ManualOptional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on re ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 19600 €: 376.32 €: 5 mm: 2000 mm: 250 mm: 3000 mm: 750 mm: 1400 mm: 1350 kgMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemThroat depth: 1200 mmAccording to EC safety regulationsOperating manualOPTIONAL EQUIPMENT: 1 spare blade set Flanging attachment with 1 set rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 16000 €: 307.2 €: 20000 kg: 10000 to: 900 mm: 4500 mm: 300 mm: 2 x 70 mmRotatators are used across industries to facilitate production and simplify the assembly of tanks,drums,as well as pressure vessels and cylinders of all types and sizes.They increase speed and efficiency in both automatic and manual welding processesby increasing productivity while minimizing additional work steps and crane use.They allow the operator to control all functions, including clockwise and counterclockwise rotation,with exceptionally smooth and precise speed control.Roller material: PolyurethaneStandard rotators currently cover load capacities from 5 to 150 tons.Capacity can be expanded up to 250 to upon request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
70 € 
