Complete production and filling plant for a pub brewery, consisting of
the following components: 1. Milling plant Milling mill with malt feed
hopper and pipe chain conveyor system for malt grist. 2. Brewhouse
2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block
with copper-clad stainless steel vessels. The wort is cooled by a
separate plate heat exchanger (API Heat Transfer, built in 2013) with
downstream wort aeration. There is also a hot water tank (Kaspar
Schulz, 2013) with insulation and heating jacket. 3. Fermentation and
storage cellar 4 cylindroconical fermentation and storage tanks
(Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a
maximum overpressure of 3 bar. 3 cylindroconical fermentation and
storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each
and a maximum overpressure of 3 bar. The temperature of these 7
cylindroconical fermentation and storage tanks is controlled by a
common control cabinet. In addition, there are 2 further
cylindroconical fermentation and storage tanks (Kaspar Schulz, built
in 2013) with a gross volume of 14.7 hl each and a maximum pressure of
3 bar. The temperature of these two cylindroconical fermentation and
storage tanks is controlled by another control cabinet. 4. Pressure
tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz,
2013) with clamp heads, each with a gross capacity of 10.5 hl and a
maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle
filler (JS Maschinen) with 6 filling heads. Keg interior and exterior
washer (Scheuer) with spray nozzles in stainless steel housing and lye
tank in the base. Keg filling station with taps for direct filling of
kegs from the pressure tanks. 6. Operating/supply technology
Refrigeration system (Hafner-Muschler, 2013) as an ice water storage
system with R404a refrigerant and 3 refrigeration compressors.
Oil-free compressed air piston compressor (Kaeser, 2013) with a
maximum operating pressure of 10 bar and compressed air refrigeration
dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with
adjacent nitrogen pressure tank., Additional title: complete brewing
plant with copper-clad brewhouse, Cast wort capacity: 10 hl, Features:
grain mill, malt transport system, 2-unit brewhouse made of stainless
steel (copper clad), wort cooling, hot water tank, 9 fermentation
tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5
hl), siphon filler, keg washing system, keg filling station,
compressed air system, refrigeration system, N2 generator,
Alemania
freising 
