DMG бывшая в употреблении машина на продажу

This 4-axis DMG SAUER LASERTEC 40 Laser engraving and cutting machine was manufactured in 2008. It utilizes a Nd:YVO4 laser with a wavelength of 1064 nm, ensuring precise and detailed work. The machine features an acousto-optic Q-Switch for pulse enhancement, contributing to its efficiency and quality. A cooling system using deionized water maintains optimal temperature during operations. Buy this DMG SAUER LASERTEC 40 Laser engraving and cutting machine. For more information about this laser engraving and cutting machine, please reach out to us.

Description: Maschine number: 15405040314 Operating voltage: 400 V Frequency: 50/60 Hz Control voltage: 230 V Rated current: 35 A Connection: 20 kVA Control system: SIEMENS ERGOLINE SHOP MILL Spindle speed: 20 - 10000 rpm Tool holder: SK 40 Feed drives in X-, Y- and Z-axis infinitely programmable: up to 20000 mm/min Rapid traverse X-, Y- and Z-axis: 25 m/min Set-up mode (operating mode 2) X-, Y- and Z-axis: 20 - 2000 mm/min Position measuring system resolution X-, Y- and Z-axis: 0.01 µm Travel paths: X: 635 mm Y: 510 mm Z: 460 mm Tool changer with double gripper With 20-fold tool changer Max. Tool diameter without free spaces: 80 mm Max. Tool diameter with free neighboring slots: 130 mm Max. Tool length from spindle nose: 300 mm Max. Tool weight with automatic tool change: 6 kg Working area: Clamping surface: 790 x 560 mm Distance between the T-slots: 100 mm Number of clamping grooves:  ...

: 6 Messuhren : nur : ja

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm CNC-control: SINUMERIK 810D SIEMENS table-size: 1200 x 560 mm max. table load: 1000 kg spindle taper: SK 40 spindle turning speed range: 8.000 U/min drive capacity - spindle motor: 13 kW feed stepless: 20.000 mm/min rapid traverse: 25 m/min tool change unit: 20 Pos. coolant: voltage: 400 V total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,55 x 2,30 x 2,25 m chip conveyor: 3,80 x 0,90 x 1,55 m - Fabr.No.: 1539000480E - Machine ON: 14.035 h - Spindle ON: 5.356 h - Control SIEMENS Sinumerik 810 D - electrical hand wheel - chip conveyor - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are offering our Gildemeister 200S for sale. However, after some power parts were replaced, we were no longer able to put the machine into operation. All defective parts were replaced by DMG. The machine can be inspected at any time. Details of the machine: Year of construction: 2007 Control: Siemens 840D Tool holder: HSK63 Tool places: 32 Equipment features: Chip conveyor High pressure pumps Paper belt filter Suction unit Chip flushing gun Tool holder 3-jaw chuck [diameter: 315 mm] from SCHUNK 3-jaw chuck [diameter: 260 mm] from SCHUNK For further information or an inspection, please do not hesitate to contact us.

x-travel: 1600 mm y-travel: 1250 mm z-travel: 1000 mm Control: HEIDENHAIN TNCi 530 tool taper: HSK-A63 spindle turning speed range: 18000 U/min table dimension - cross: 1250 mm table dimension - longitudinal: 1500 mm rapid traverse: 60 m/min feed: 20-15000 mm/min workpiece weight: 4000 kg table turning speeds: 10 U/min Tools changer: 60 pos. handwheel: el. Machine on: 49248 Spindle hours: 13157 total power requirement: kW weight of the machine ca.: 34 t dimensions of the machine ca.: 8800 x 8800 x 3500 m he DMU 160P is in very good condition and can be inspected under power at the sellers premises. under power at the sellers premises. The machine has mainly been used to mill plastic and otherwise aluminium. Description: Spindle HSK63 18.000 1/min approx. 1.000h Minimum lubrication inside/outside Blowing air inside/outside coolant from the outside Tool magazine 60-fold Measuring probe Hei ...

Description: Equipment: Measuring systems: Direct in all axes (glass scales) Chip removal: Chip conveyor Coolant supply: IKZ system, 40 bar Workpiece measurement: Infrared measuring probe (broken according to photos) Set-up mode: Electronic handwheel Process monitoring: Operating mode 4 Emulsion mist separator: Electrostatic extraction, W+W EL-FI 1000 Further Equipment: Rotary table, Visiport z-motion: 720 mm, max. workpiece weight between centers: 3,000 kg, x-motion: 3,000 mm, y-motion: 560 mm, control: Heidenhain iTNC 530, table surface area l x w : 3400x600 mm, taper: SK 40, toolchanger positions: 100, power capacity - spindle: 35 kW, spindle torque: 130 Nm, turning speed range: 12.000 rpm, total power requirement: 35 kW, weight approx.: 17,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,500 x 3,000 mm

This DMG CTX 210 Turret punching machine was manufactured in the year 2006 in Italy and has 60050 production hours. It is equipped with a Heidenhain Plus IT DinPlus control unit. The machine disposes of a ball screw spindle, a 12-fold tool changer with driven tool and chip conveyor and a mechanical oil and emulsion mist cutter.

This DMG CTX 320 linear Lathe was manufactured in the year 2008 in Italy and has 51180 production hours. It is equipped with a SIEMENS 840D control unit. The machine disposes of a spindle which has a max. speed range of 6000 rpm and a turret with 12 tool positions. It is included with a barfeed magazine.

Ход по оси X: 635 мм Ход по оси Y: 510 мм Перемещение по оси Z: 460 мм Скорость вращения шпинделя - бесступенчатая: 20-14000 U/мин Вес станка ок.: 4 т Габариты станка ок.: 5 x 3,5 x 2,7 м

- -: - - DMG - SPRINT 42 линейный Машина находится в ухоженном состоянии. Технические характеристики машины будут опубликованы в ближайшее время. - - #Tags- Спринт-42 | 42линейный

- -: - - DMG - SPRINT 42 линейный Машина находится в ухоженном состоянии. Технические характеристики машины будут опубликованы в ближайшее время. - - #Tags- Спринт-42 | 42линейный

travel -x axis: 1.250 mm travel -y axis: 880 mm travel -z axis: 800 mm control: HEIDENHAIN turning speeds: 10.000 U/min numbers of positions in the tool changer: 120 tool taper: SK50 5-axis simultaneous machining center | DMG - DMC 125 U equipped with automatic B-axis Equipment/accessories: - 4 pallets - Handwheel - Blown air spindle center - Measuring probe: TS 641 The machine is in a well-maintained condition and can be inspected at any time under power. Please find further equipment information about this machine in the original documents included in the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC125U | DMC-125U | DMC 125U | DMC125 | DMC-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This DMG NTX1000 Lathe was manufactured in the year 2012 in Germany. It is equipped with an SIEMENS SINUMERIK 840 D control unit and has 5 axis. The machine has a spindle speed of 6000 rpm and a milling spindle speed of 20000 rpm.

This DMG CTV 250 (V3) Vertical Lathe was manufactured in the year 2008 in Germany and has 44158 production hours, of which 30517 are spindle hours. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a spindle speed of 5000 rpm.

This DMG DMU 50 T Vertical Machining center was manufactured in the year 1997 in Germany. It is equipped with a Heidenhain MillPlus control unit. The machine has a spindle speed of 9000 rpm.

This DMG DMU 50 evo linear Vertical Machining center was made in 2010 in Germany and has 30651 production hours. It is equipped with a Heidenhain 530 control unit and has 5 axis.

This DMG DMC 80 U duoBLOCK Universal Machining center was made in 2008 in Germany and has 28951 production hours, of which 14200 are spindle hours. It is equipped with a Heidenhain TNC 530 control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This DMG DMC 1035 V ecoline Vertical Machining center was manufactured in the year 2012 in China. It is equipped with a SIEMENS SLIMline control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. Availability is beginning of May 2024, depending on the arrival of a new machine.

This DMG DMC 70 V Vertical Machining center was manufactured in the year 1996. The machine has a spindle speed of 15000 rpm.

This DMG DMU 40 evo Vertical Machining center was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

This DMG SAUER LASERTEC 50 5-axis laser precision machine was manufactured in the year 2010 in Germany. It is currently still in production but with direct availability. It is in a very good condition with in total 81,142 machine on hours and 14,393 cutting hours. The machine comes with a LASAG FLS 352 A laser (2011), a Keller L-CUT-1-P2-B60-V extraction system (2010) and a KKT OLB 10 SA chiller (2014). See attached the original tech specs as PDF in German.

This DMG DMU70 Vertical Machining center was manufactured in the year 2007 in Germany and has 45808 production hours of which 25900 are spindle hours. It is equipped with a HEIDENHAIN 530 control unit and has 3+2 axis. The machine has a spindle speed of 12000 rpm.

This DMG DMU 105 MonoBlock Universal Machining center machine was manufactured in the year 2013 in Germany and has 24687 spindle hours. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit. It disposes of a scraper belt chip conveyor and a vertical chain magazine basic with 60 magazine slots. See original order confirmation (German) as PDF attached for more details.

This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.

This Lathe DMG CTX 310 ecoline was manufactured in the year 2011 in Poland and has 7500 spindle hours. It is equipped with a DMG SlimLine Siemens with ShopTurn control unit. The machine disposes of a detail clamping claw attached when needed for bar processing and a overlay for quick programming Shopturn. New hydraulic chuck fitted and Drive belt replaced about 1 year ago. Hydraulic oil newly replaced 7 months ago.

This DMG Robo2Go Lathe Robot was manufactured in the year 2022.

This DMG CTX Alpha 500 Universal Machining center was manufactured in the year 2017 in Italy. It is equipped with a HEIDENHAIN CNC Pilot 640 control unit. The machine has a spindle speed of 5500 rpm.

This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 3 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions.

DMG M1 Vertical Machining Center 12.000 RPM Machine is in excellent condition Control Unit Siemens 828D Internal Cooled Tool Measuring Probe Available Automatic part reset feature available It is a clean machine used only for aluminum material processing. Routine maintenance was done on time. It is in working condition at zero setting. It was not used in the intensive manufacturing process. Working hours: 6800 hours (May 2023) Max. travel 550 mm Max. travel 550 mm Max. travel 510 mm Max. workpiece length 550 mm Max. workpiece width 550 mm Max. workpiece height 400 mm Max. workpiece weight 600 kg ------ Most Asked Questions About DMG M1 Vertical Machining Center What is the Price of the DMG M1 Vertical Machining Center? Understandably, the first question on many buyers minds is the cost. Please contact us for the latest pricing and any available financing opti ...