Modelo
(Fabricante: DEMAG)
Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg
Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg
Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Demag, compressor control from screw compressor type 350WS -Module: BT SBE 42008 TW-2294V-0 -Individual components: see photos -Dimensions: 395/105/H25 mm -Weight: 0.3 kg
Gear motor electric motor -Speed: 197 rpm -Power: 0.55 kW -Construction: hollow shaft angle B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 460/230/H170 mm -Weight: 20 kg
Injection molding machine, clamping force control unit, control unit -Manufacturer: Demag Kunststofftechnik, clamping force control unit -Type: DMS-SKR 79/5 ID no. 064 929 65 RMS -Dimensions: 165/95/H95 mm -Weight: 0.7 kg
friction wheel, running wheel, bridge crane, hall crane, assembly crane, workplace crane -Friction wheel travel drive for: Demag crane -Wheel diameter: 270 mm -Wheel width: 90 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 390/120/H290 mm -Weight: 38 kg/piece
Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as inspected -Housing damaged, cable without connector, see photos -Manufacturer: Demag, crane remote control control unit -Cable length: 2.0 m / 5-core -Dimensions: 500/300/H100 mm -Weight: 1.9 kg
Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg
Crane block, crane hook, load hook, single hook, bottom block -Cover: Lid for crane bottle 2 pieces / = 1 set -Type: unfortunately without type designation -Bore: Ø 50 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: Ø 278 x 60 mm -Weight: 2.8 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg
Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg
Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg
Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Demag, electric chain hoist with chassis -Type: PK1N load capacity 250 kg -Main stroke: 4 m/min -Fine stroke: 2 m/min -Transport dimensions: 600/500/H230 mm -Weight: 23 kg
Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg
Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: ZBF80A8/2B020 -Manufacturer gearbox DEMAG Type: AMK20DD -Power: 0.13/0.50 kW -Speed: 45/131 rpm -Design: M0-30-1/16.4 -Hollow shaft diameter: toothed Ø 28/30 mm -Protection class: IP54 -Dimensions: 505/210/H220 mm -Weight: 42.3 kg
Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg
Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: KBF80A8/2 -Manufacturer-Gearbox DEMAG Type: AF04-M-0-1-25-1 -Power: 0.13/0.50 kW -Speed: 43.4/186.8 rpm -Design: hollow shaft -Hollow shaft diameter: toothed Ø 22/25 mm -Protection class: IP54 -Dimensions: 445/155/H270 mm -Weight: 22.4 kg
Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg
Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: 500 kg -Dimensions: see technical drawing in the photos -Dimensions: 250/243/H180 mm -Weight: 15 kg
indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total
Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook -Type: PKV1-V1-F4 -Load capacity: 125/250 kg -Main lift: 8/4 m/min -Fine stroke: 2/1 m/min -Number: 2x chain hoist available -Price per piece -Dimensions: 230/200/H235 mm -Weight: 15 kg/pc.
Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total
Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook -Type: PK1L -Load capacity: 125/250 kg -Main lift: 12/6 m/min -Fine stroke: m/min -Number: 1x chain hoist available -Price per piece -Dimensions: 230/200/H235 mm -Weight: 15kg
indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg
Grua de largura da via: 9,50m largura (sem buffer de paragem); 3,77m Largura da laga do gato: 1,40m Capacidade de elevação: 10to segundo o gancho Desmontada
This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.
This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details.
This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.
Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement.
