Модель
(Производитель: DECKEL MAHO)
This used DECKEL MAHO DMC 60 U machining center, manufactured in 2002, is equipped with a Siemens SINUMERIK 840D (3D-Bahnsteuerung) controller. The machine offers 5-axis simultaneous machining with travels of 600 x 700 x 600 mm. It features a Schwenkfraeskopf (B-axis -7 / +180 degrees) and an NC-Rundtisch (C-axis 360 degrees). The spindle reaches 12,000 rpm with 28 kW power and 121 Nm torque. The setup includes an APC with 2 pallets (630 x 500 mm), a 60-position tool magazine with a horizontal double-arm changer, and IKZ Form AD (Innenkuehlmittelzufuhr).
This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2000. It features a travel range of 1000 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a vertical tool changer with 24 stations and a maximum permissible load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 103 V vertical machining centre we have for sale. Contact us for further details.
X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation.
x-travel: 730 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain NC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 10 / 15 kW max. Torque: 130 / 87 Nm tool taper: HSK-A63 swivellable: NC: +30 / -120 ° work table:: table surface area: 1.000 x 600 mm T-slots: 9x 14 x 63 mm NC-Rotary table:: table diameter: 600 mm rotatable: C: 360 ° max. table load: 500 kg tool magazin:: number of toolpositions: 60 pos. tool taper: HSK-A63 total power requirement: 40 kVA weight of the machine ca.: ca. 11,0 t dimensions of the machine ca.: 4,5 x 4,5 x 3,5 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 20 bar Coolant through spindle: AD turning milling head: NC NC-rotary table: elektr. hand wheel: test probe: TS 640 Heidenhain elektr. hand wheel: iTWC 530 tool setting: BLUM Laser 3D quickSET: Signal lam ...
x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: 840 D Siemens Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 ° swivle time: 1,2 s pallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mm max. workpiece weight: 1.500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 180 pos. tool taper: HSK-A63 total power requirement: 78 kVA weight of the machine ca.: 27,0 t dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rota ...
x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 125 Nm tool taper: MAS BT 40 swivellable: B: 103 ° feed:: feed speeds: 20 - 10.000 mm/min rapid traverse X-axis: 26 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 20 m/min Resolution: 0,001 mm input unit: 0,001 mm work table:: surface area: 1.000 x 600 mm rotary table dia.: 600 mm number of T-slots: 8 / 1 T-slot - width: 14 H12 / 14 H7 T-slot - distance: 63 mm max. table loading capacity: 350 kg rotatable: C: 360 ° Tool-Presetter:: number of toolpositions: 24 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 315 mm max. tool weight: 8 kg total wight: max. 100 kg total power requirement: 26 kVA weight of the machine ca.: 6,7 t di ...
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain NC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 10 / 15 kW max. Torque: 130 / 87 Nm tool taper: HSK-A63 swivellable: NC: +30 / -120 ° work table:: table surface area: 1.000 x 600 mm T-slots: 9x 14 x H7 max. table load: 700 kg tool magazin:: number of toolpositions: 60 pos. tool taper: HSK-A63 total power requirement: 49,7 kVA weight of the machine ca.: ca. 11,0 t dimensions of the machine ca.: 4,5 x 4,5 x 3,5 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: turning milling head: elektr. hand wheel: Rotary screen: paper band filter: Spray gun: exhaust fan: indexing attachment: EA-733.20 Tailstock: CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead - Spind ...
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 40 pos. tool taper: HSK-A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: tool monitoring: BLUM Laser elektr. h ...
x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: HSK-A63 NC-Tilting round table:: table surface area: 700 x 500 mm Swivel range B-Axis: 0 - 180 ° Swivel range C-Axis: 0,001 ° max. table load: 350 kg center hole: 30 H6 mm T-slots: 7x 14H7 x 63 mm table turning speeds: 21,5 rpm tool magazin:: number of toolpositions: 32 pos. max. tool length: 315 mm max. tool diameter: 105 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 / 50 / 50 m/min feed speeds: 20.000 mm/min Feed force: X / Y / Z: 8 / 8 / 7 kN total power requirement: 50 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 6,5 x 3,5 x 3,5 m Documents: Chip-Tray: Coolantsystem: ...
x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 60 pos. tool taper: HSK A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,0 x 6,5 x 3,2 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: test probe: Heidenhain TS 640 tool mo ...
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° max. workpiecediameter: 850 mm max. workpiece height: 550 mm tool magazin:: number of toolpositions: 32 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 8,0 kg change-time chip to chip: 10 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Accelaration: 5 m/s² total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 5,0 x 2,9 m Documents: Chip conveyor: Coolantsystem: test probe: Heidenh ...
x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...
x-travel: 760 mm y-travel: 460 mm z-travel: 560 mm control: Sinumerik 840 D PL - Shop total power requirement: 19/28 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 12 Lademeter m Movie: https://www.youtube.com/watch?v=W7csFFlodrQ No. 4100 Bar machining center 5 axes DECKEL MAHO DMC 60 S Working area: 760 x 460 x 560 Drive: 19/28 kW Control: Sinumerik 840 D - Powerline Shopmill NC swivel milling head (B-axis) -120/+30° 60-fold tool magazine with taper cleaning NC rotary axis (A-axis) with collet chuck Spanntop 65, Tailstock, hydraulically lowerable, NC bar loader 1100 mm Workpiece pick-up device with discharge belt Production package with coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through spindle center Chip conveyor, Rotating inspection window BLUM tool measuring system Oil mist extraction Operating mode 4 HSK-A 63 spindle Speed range up to 18,000 min-1 Fe ...
x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm Control: SIEMENS 810D powerline table dimensions: 850 x 630 mm table load capacity: 600 KG tool magacine with: 30 Plätzen spindle turning speed range: 12.000 U/min total power requirement: 42 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor coolant / belt filter system Interlit SPB 3/600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm control: Siemens 840 D total power requirement: 19 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 5 x 4 x 3 m No. 5312: Vertical machining center DECKEL MAHO type DMC 64 V linear year of construction 2007 Working area: 640 x 600 x 500 mm Drive power: 13/19 kW Equipment: Table 850 x 600 mm ( WITHOUT the clamping devices shown ) Preparation 4th axis Production package / IKZ 40 bar: BFA 600 cooling lubricant cleaning system Integrated spiral chip conveyor Separate scraper belt chip conveyor documentation Miscellaneous: Spindle ISO 40 Speed range 1-12,000 min-1 Space requirement see sketch Transport dimensions approx. 6.5 loading meters Weight approx. 8.8 tons The machine is ready for operation with wear and tear due to age and use. Short video: https://www.youtube.com/watch?v=sDkgx4BYXeY Special price ex works EXW - free l ...
A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible.
DMF260/11 → Year of manufacture: 2011 Heidenhain TNC 530 Spindle SK 40 – 18,000 rpm Machine hours: 54,877 Spindle hours: 21,845 Condition: second-hand However, it is currently still in use and will be available in 2027 Find more here - .ucymachines/ Contact us at - sales@ucymachines
x-travel: 1.600 mm y-travel: 1.250 mm z-travel: 1.000 mm size of pallet: 1.000 x 1.250 mm control: SIN840D power capacity at 40 % load: 38,00 KW spindle turning speed - stepless: 20 - 10.000 U/min power capacity at 100 % load: 25,00 kW max. torque at 40% / 100% load: 288 / 187 Nm tool taper: SK50 feed X/Y/Z/-axis: 20 - 15.000 mm/min rapid traverse X/Y/Z: 60,00 m/min B - axis: -150° / +80° x 0,001 ° feed B-axis: 3.600 ° / min C-axis: 360 x 0,001 ° Rapid motion C- axis: 1 - 3.600 U / min. table load: 3.000 Kg tool magacine with: 240 tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 250 mm tool length - max.: 650 mm weight of tools max.: 15,00 kg total power requirement: 75,00 kW weight of the machine ca.: 55,00 t dimensions of the machine ca.: 12,50 x 8,00 x 4,20 m 5-axis machining center with control SIEMENS Sinumerik 840D incl. ShopMill electronical handwheel operati ...
x-travel: 600 mm y-travel: 700 mm z-travel: 600 mm Control: Siemens type: Millplus Table dimensions: 630x500 mm tool taper: ISO 40 Cooling through the spindle: 40 bar Tool changer: 60 Pos. no. of tables: 2 chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Milling head automatically swivels horizontally/vertically The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward ...
б/у
x-travel: 800 mm y-travel: 650 mm z-travel: 550 mm control: Heidenhain Millplus tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serial Number: 71201389 with angle table 900 x +640 25-station tool changer magazine Coolant treatment Interior lighting The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad ...
x-travel: . mm y-travel: . mm z-travel: . mm control: SIemens type: 840 D ECOLINE Shopmill table surface area: mm workpiece weight: kg Tool changer: 30 Fach spindle taper ISO: Spindle capacity: KW turning speeds: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible b ...
x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm feed: 30 m/min control: Siemens type: 840 D table surface area: 1250x600 mm table load: 800 kg Tool changer: 30 Fach spindle taper ISO: SK 40 Spindle capacity: KW turning speeds: 12000 U/min total power requirement: 24 kvA weight of the machine ca.: 8,8 t dimensions of the machine ca.: . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...
x-travel: . mm y-travel: . mm z-travel: . mm control: SIemens type: Shopmill 840 D table surface area: mm workpiece weight: kg Tool changer: 30 Fach spindle taper ISO: Spindle capacity: KW turning speeds: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appoin ...
x-travel: 1060 mm y-travel: 710 mm z-travel: 710 mm Control: Heidenhain type: ITNC 530 spindle speed:: . spindle taper: SK 40 surface area: 1500x795 mm Table load: 550 kg feed motor: 20-15000 kW Rapid movement: 30000 mm/min round table: 800 mm diameter: 800 mm table turning speeds: 15 U/min milling-head swivable +/-: Tool changer: 32 paper filter: The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Yo ...
x-travel: 1035 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain type: iTNC 530 table surface area: 1400x650 mm workpiece weight: 1000 kg Tool changer: . spindle taper ISO: SK40 Spindle capacity: 10 KW turning speeds: 8000 U/min total power requirement: 20 kVA weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 15425033554 Chip conveyor 2 hydraulic vises Operating hours: 53005 Spindle hours: 12233 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers ...
б/у
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm spindle turning speed range: 12000 U/min milling-head swivable +/-: control: Heidenhain type: Mill Plus table surface area: 1000x600 mm : elktr. coolant: chip conveyor: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spinel hours 2070 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Te ...
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control: Heidemhain type: 426/430 spindle speed:: 18000 spindle taper: HSK 63 surface area: 1250x700 mm Rotary table: 700 mm Table load: 1000 kg b-axis: Schwenkopf 0,001 ° c-axis: 0-360° Rundtisch 0 B-axis C-axis Air blow through the spindle HSK 63 Electronic handwheel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The da ...
x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm turning speeds: 12000 1 U/min : control: Heidenhain total power requirement: 59 kW weight of the machine ca.: 10,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
