x-travel: 400 mmy-travel: 300 mmz-travel: 400 mmspindle taper ISO: 40 spindle turning speed range: 40 - 2.000 U/mintable-size: 750 x 320 mmfeeds -stepless-: 10 - 380 mm/minrapid traverse: 1.200 mm/minpower capacity: 2,2 kWquill stroke: 80 mmcoolant: voltage: 400 Vtotal power requirement: 4,7 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 1,15 x 1,40 x 1,85 m- Serial-No.: 148373- 3-axis digital display- Horizontal milling device- Milling head swivels ±45°- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x行程：1200 mmy行程：450 mmz行程：400 mm控制：对话框 11 总功率要求：5 kW机器重量约：2,5 t机器尺寸约：332,2 m特价出厂正常价格出库此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
x-travel: 450 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-axes digital read outhorizontal and vertical milling spindlequillTechnische Daten / technical details:Längsweg X / X-travel longitudinal 450 mmQuerweg Y / Y-travel cross 300 mmSenkrechtweg Z / Z-travel vertical 350 mmTischgröße / table size 800x400 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpmVorschubbereich / feed range 8-400 mm/min.Antriebsleistung / power capacity 3,2 kWGewicht der Maschine / weight 1500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 350 mmy-travel: 150 mmz-travel: 340 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 40 - 2000 U/minfeeds: 5 - 500 mm/minrapid traverse: 1,2 m/mintotal power requirement: 1,9 kWweight of the machine ca.: 0,7 t- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 290 mmy-travel: 170 mmz-travel: 310 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 50 - 2600 U/minfeeds: 9 - 450 mm/minquill stroke: 70 mmtotal power requirement: 5,5 kWweight of the machine ca.: 720 kg- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain TNC 113 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5152Universal tool milling machineDeckel FP 4 M (K) - 2203Working area: 500 x 400 x 400Drive: 4 kWSpindle holder SK 40 / DIN-2080Speed range 50 - 2,500 min-1Feed rates 8-630 mm/min steplessRapid traverse 1.3 m/minFixed table 800 x 460 mmChip trayHeidenhain TNC 113 Active Digital readoutSpace requirement approx. 2 x 2 x 2mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5124Universal tool milling machineDECKEL FP 4MWorking area: 500 x 400 x 400Drive: 4 kWControl: 3-axis digital display HeidenhainSpindle holder SK 40 / M16Speed range 50-2500 min-1Feed rates 8-630 mm/minRapid traverse 1.3 m/minFixed table 800 x 460 mmChip traydocumentationSpace requirement approx. 2 x 2 x 2 mWeight approx. 1500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X轴行程：300毫米Y轴行程：300毫米 Z轴行程：400毫米 控制：对话/轮廓 3 总功率要求：4 kW机器重量约：1.5吨 机器尺寸约：232米 包装价格：3 x DECKEL FP 2 免出厂卡车库存号：5267 FP 2 A 轮廓 35268 FP 2 A 轮廓 35290 FP 2 NC 对话 2
X 轴行程：500 毫米Y 轴行程：400 毫米Z 轴行程：400 毫米总功率要求：4 kW机器重量：1.8 吨机器尺寸：222 米1 x UWF 700 Digi3 x UWF 801 TNC 135 + 1241 x UWF 802 M从库存清算，部分不起作用/需要维修价格 VHS / 与投标
x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 2 x 2 mNr. 3287Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5 kWSpeed range 2000 rpmTool holder SK-40Rigid angled table 210 x 600 mmDocumentationOptional / available on request:- Universal table- counter holder- Rotary table Ø 380mm- Dividing headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 222 mUniversal tool milling machineHERMLE UWF 700Spindle holder SK 40Speed range 40-2000 minSpace requirement approx. 2 x 2 x 2 mWeight approx. 1100 kgFor further data see attached PDFRigid table 700 x 285Horizontal milling machine vertical - milling head enclosed - partially rep. conditionedDocumentationWorking area: approx. 410 x 310 x 400Drive: 2,2Heidenhain digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 11 total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 3,5 x 2,5 mNo. 4430Universal tool milling machineWorking area: 710 x 600 x 455 mmDrive: 7.5Control: Dialog-11 controlSpindle holder SK 40Speed range up to 6,300Fixed tableCabinCoolant containerSpace requirement see data sheetWeight approx. 5 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 220 mmz-travel: 400 mmControl: Dialog 2 total power requirement: 1,6 / 2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 5290Universal tool milling machine DECKEL FP 2 NC / 2801Working area: 300 x 220 x 400Drive: 1.6/2 kWControl: Dialog 2 contouring controlFixed table with chip traySpindle SK 40Speed range up to 3150 min-1Quill stroke 65 + 60 mmSpace requirement c.3 x 3.5 mTransport dimensions approx. 2 loading metersWeight approx. 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,52,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
控制： Heidenhain 355 x 行程： 850 mmy 行程： 550 mmz 行程： 450 mm刀具锥度： SK50 液压虎钳： 文档： 机器重量 ca.： 5,5 t
tool adaptor: 50 mmdriven tools: 5 Stück: 4 Stück: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 300 mmz-travel: 440 mmtable-size: 1120 x 260 mmspindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,36 tdimensions of the machine ca.: 1,65 x 1,32 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 40 - 2000 U/minfeeds: 5 - 500 mm/minrapid traverse: 1,2 m/mintotal power requirement: 1,9 kWweight of the machine ca.: 0,7 t- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X 轴行程：850 mmy-行程：270 mmz-行程：355 mm刀具锥度：ISO 50 主轴速度（左/右）：25-1400 总功率要求：3.8 kW 机器重量 ca.：2 t机器尺寸 ca.：m- 进给所有轴 10 - 630 mm/min / 250 mm/min此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
x-travel: 2.200 mmy-travel: 560 mmz-travel: 720 mmcontrol: iTNC 530 Heidenhainturning speed range - milling: 20 ~ 12.000 U/minpower capacity - milling spindle: 35 / 25 kWtool taper: SK 40 tool piece magazine with: 100 pos.table surface area: 2.600 x 600 mmrapid traverse X-axis: 100 m/minrapid traverse Y-axis: 50 m/minrapid traverse Z-axis: 50 m/minmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgmax. table load: 2.200 kgtotal power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: 7,0 x 4,2 x 2,7 mChip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mmSeperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 barTravelling column milling machineDECKEL MAHO - DMF 220 Linear- new spindle installed (April 2024)- incl. 4th Axis 560mm and ...
x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 800 x 400 mmspindle taper: SK 40 control: HEIDENHAIN TNC 310 spindle turning speed range: 10 - 3150 U/minspindle drive: 5,5 kWfeed - longitudinal/cross: 1 - 5000 mm/minfeeds vertical: 0,5 - 2500 mm/minrapid traverse: 6 / 6 / 3 m/mintotal power requirement: 10 kVAweight of the machine ca.: 2,5 tdimensions of machine L x W x H: 2,16 x 1,70 x 2,0 mAccessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X 轴行程：560 毫米Y 轴行程：500 毫米Z 轴行程：400 毫米控制：Heidenhain TNC 114 Aktiv 车削速度范围：40 - 4000 U/min主轴驱动，2 级：3,3 / 4 kW总功率要求：9 kW机器重量：2,3 吨机器尺寸：2,3 x 2,3 x 2,1
x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmControl: CNC 432 total power requirement: 7 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 3 x 3 x 2 mNr. 3666Universal tool milling machine MAHO MH 400 C- in need of repair - unclear defect -Arbeitsbereich: 400 x 375 x 250Steuerung: Philipps CNC 432 - BahnsteuerungSpindle SK 40Speed range 80 - 4000 rpmDimensions: 2.20 x 1.60 x 1.70 mWeight approx. 1500 kgThe machine comes from a trade-in,Screen appears, control cannot be switched onUnknown defectsMachine is sold as a spare parts carrier / hobbyist machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X 轴行程：800 毫米Y 轴行程：300 毫米Z 轴行程：400 毫米总功率要求：3 kW机器重量：2，，2 吨机器尺寸：2,522
X 轴行程：560 毫米Y 轴行程：500 毫米Z 轴行程：400 毫米总功率要求：7,5 kW机器重量：2,3 吨机器尺寸：2,22,22,2
X 轴行程： 560 mmY 轴行程： 500 mmZ 轴行程： 400 mm总功率要求： 7.5 kW机器重量约： 2.3 t机器尺寸约： 2.22.22.2 m
X 轴行程：300 mmY 轴行程：300 mmZ轴行程：400 mm控制：轮廓 - 3 / 对话框 4 总功率要求：5 kW机器重量 CA.：1,5 吨机器尺寸：2,5 x 2,5 x 2,5 m编号 5267：万能刀具铣床制作 DECKEL， Mod.FP 2 A / 2819 带 Contour 3 控制单元工作区域：300 x 300 x 400 mm
X 轴行程：300 mmY 轴行程：300 mmZ轴行程：400 mm控制：轮廓 3 / 对话框 4 总功率要求：5 kW机器重量约：1.5 吨机器尺寸约：2.5 x 2.5 x 2.5 m编号 5268：万能工具铣床制作 DECKEL， Mod.FP 2 A / 2819 带 Contour 3 控制单元工作区域：300 x 300 x 400 mm
x-travel: 400 mmy-travel: 400 mmz-travel: 500 mmControl: Sinumerik 880 total power requirement: 9 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3 x 3 x 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 4614Mikron WF 31 SAUniversal tool milling machineWorking area: 560 x 500 x 400Control: Heidenhain TNC 114 - active digital displayRigid angular tableSpindle holder SK 40Coolant deviceSpeed range 40 - 4000 rpmWeight approx. 2450 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,5 x 2 x 2 mNo. 3934Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5Tool holder SK 40Speed range 2000 rpmRigid tableDocumentationOn request / optionally available:-Universal table / fixed table- Hydraulic machine vice- Tool cabinet- Rotary table Ø 380 mm-Cutting attachment-Collets and arborsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmcontrol: PHILIPS CNC 432 table surface area: 740 x 440 mmspindle taper: SK 40 spindle turning speed range: 20 - 5000 U/minfeeds: 1 - 4000 mm/minrapid traverse: 6 m/minquill stroke: 80 mmtoolpiece magazine: chain magazine: 30 Postool diameter if 2 vacant positions: max. 130 mmtool diametre at full load: 100 mmtool length - max.: 250 mmweight of tools max.: 8 kgtotal power requirement: 15 kVAweight of the machine ca.: 3,8 tAccessories: vertical head with hydr. tool clamping and quil retraction, univ. table (manual), electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain TNC 310 cnc controlelectronical hand wheelcoolant deviceTechnische Daten:Längsweg (X-Achse) / X-travel longitudinal 600 mmQuerweg (Y-Achse) / Y-travel cross 400 mmSenkrechtweg (Z-Achse) / Z-travel vertical 400 mmWerkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-3700 UpMVorschub / feed 0-2000 mm/min.Eilgang längs + quer / rapid feed x/y 5 m/min.Eilgang senkrecht / rapid feed z 4 m/min.Antriebsleistung gesamt / drice capacity 7 kWGewicht ca. / weight ca. 2000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with Mo ...
X 轴行程： 290 mm 轴行程： 170 mm Z 轴行程： 310 mm 工作台表面积： 600 x 215 mm 主轴锥度： SK 40 主轴车削速度范围： 50 - 2500 U/min 进给量： 9 - 450 毫米/分钟羽毛笔行程： 70 mm总功率要求： 1,8 kW机器重量 约： 860 kg机器尺寸 长 x 宽 x 高： 1,06 x 1,05 x 1,33 米附件：带套筒缩回的垂直头、实心工作台、反向轴 、冷却
x-travel: 350 mmy-travel: 240 mmz-travel: 340 mmturning speed range: 20 - 6.300 U/minfeed speeds: 1 - 5.000 mm/minrapid traverse: 5 m/mintool taper: SK 40 power capacity: 6,3 / 10 kWcontrol: Sinumeric 810 D tool change unit: pneumatisch manuelltotal power requirement: kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: ca. 2 x 2 m110653528345-sided universal milling machineRotary table with swivel axis (clamping surface 400 x 290 mm)Rotation range C-axis displayed 360 ° on the screenB-axis swivel range +105 / -15 ° shown on the screenTable load capacity 100 kg,Operating modes 2 and 3, prepared for Net service, programming instructionsincluded, RS 232 C interfaceOperating mode 4 (extended manual intervention)Accessories: coolant device, electronic handwheelMachine is workshop tested and with electricalAcceptance reportThe data for this ad was created with ModulMWS - the so ...
