子类目
(三级类目)
生产厂家:
(品类: 401)
Aseptic carton filler previously used for the filling of aseptic milk products in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) carton filler is designed for 1.000 ml Slim cartons. Controls: 100V. Electrical diagram: 648022-1001. Production hours: 28.887 hours. Including ± 5 meter of outfeed conveyor. The machine has been running in in a milk factory / dairy in Europe. Machine still located in the factory., Type of Machine: Aseptic carton filler, Capacity (Units): 6.000 cartons per hour, Packaging: 1.000 ml Slim, Product: Milk, Controls: 100 V, Conveyors: Yes, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 28.887 h, Electric: 400/230 Volt - 50 Hz
System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...
Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...
Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler
for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system - ...
铝制螺旋盖的封闭器。容量：约14,000 bph。适用于用铝制螺旋盖封盖NRW玻璃瓶。附加标题： 制螺旋盖，容量约：20000瓶/小时，长度：1.9米，宽 1.25米，高度：2.2米，功能：8个盖
Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...
精确的灌注液位控制，用于检测瓶子的不足和过满。 大容量：10巴，电流：8安培，电压：230伏，频率：50 / 60 Hz，长度：1.2米，宽度：0.93米，高度：2.2米，重量：3 50公斤，功能：填充高度检测及封口，墨水。口吹与 气及收集
半自动旋转系统，配备四个注水/清洁头。适合：- 处理15、20、25、30和50升桶装以及20升容器 - 啤酒 - 柠檬水（无果渣） - 可口可乐饮料 - 预混和后混 - 水 - 葡萄酒 附加标题：Rotokeg，容量最高：50升桶/小时50 KEG/小时和25升啤酒，长度：1495毫米，宽度：1495毫米 高度：2400毫米， 格式：桶装类型：容量：15-50升;直径：230-405毫米;高 ：320-620 毫米，操作/控制：西门子 Simatic S5
大罐装四站加油系统，附加名称：虹吸加注器，容量 200 Fl/h，装注位置：4个，功率：100 W，电压：230 V，频率：50 Hz，长度：约1.3米，宽度：约0.75米，高度：约2米，格 式：5升派对罐;2升虹吸瓶，特点：容器在注水前加压 CIP管
桶清洗和装满系统，包括桶输送机、外部清洗机和旋 系统，用于内部清洁和装满。附加标题：清洗与装 ，容量：每桶60桶/小时，50升，操作/控制：西门子S7- 300，功能：旋转装料机（清洁和装填），桶运输，3个 CIP容器，控制
完整的液体/凝胶状产品棒包装线，包括： Inever PH6/8 - 8通道试棒包装机，配备8个旋转瓣投药泵，目前配备 度23毫米、最大长度160毫米的棒，装填容量10–14毫升 ，配合适当格式可加工宽度为17至35毫米的棒条，辊径 600毫米，辊宽640毫米，配备多轨艾伦编码装置，电气 。连接400伏/3 pH/50/60赫兹，电气化。功耗10千瓦，气压6巴，机器占 面积约2200 x 2100毫米（长×宽），机器高度约3100毫米，机器净重约 2850公斤。 Enflex ENF11水平纸盒机，间歇性操作，折叠纸箱尺寸范围为50 x 50 x 15毫米至125 x 180 x 40毫米（或125 x 140 x 60毫米）（轴宽×高），包括预折叠包装内页的宣传册 插页，包括用于粘合折叠纸箱盖的Nordson ProBlue热熔机，输出最高每分钟60个折叠纸箱，电气连 400 V/3 Ph/50 Hz ...
市面上有两台相同的填充机。100毫升、500毫升、1000毫 升容器的产出能力：17-18毫升/分钟，5000毫升容器产出 容量：9-10毫升/分钟，运输间距：317.5毫米，配备操作 面板、罐头分离器、盖板、盖子关闭装置及相关文件 现场检查是可能的
二手塑料——管子填充与密封机 制造商：TGM E250型MATIC型 建设年份 2006年 容量：800 – 3,200 管/小时 管高：50 – 235 毫米 直径：Ø 10 毫米 – 50 毫米 闭合方式：热风装置（HA） 带弹匣的装填管、管体对准、存在控制管， 管道集中、加注站、热空气组、管道编码、管道切割 ， 电子管输出， 各种格式套装和备件
Max. discharge volume: 4000cm³, net hopper volume: 1500cm³, stainless steel construction, corrosion protected, version with memory storage hoppers, circular multihead weighing system operating according to the partial quantity combination principle. Design features: chassis, frame, modules and product contact parts made of V2A, easy cleaning through enclosed design with load cells and vibratory drives integrated into the housing, electrical components integrated into the scale frame. Equipment: central product distributor with vibratory drive, inclination angle 20°, vibratory feed chutes with quick-release fasteners, dosing hoppers with motor-operated opening flaps, each driven by a separate motor, weighing hoppers with double-flap design and motor-operated opening flaps, each driven by a separate motor, all hoppers without flap return springs, storage hoppers arranged below the weigh ...
A Vemag portioning and vacuum filling machine is available. 1) Vemag Robot 500 filling machine, year of manufacture: 2021, programs: 500, max. portioning speed: 450/min, portioning range: 1g-100000g, adjustment increment: 0.1g, max. conveying capacity: approx. 2800kg/h, hopper diameter: 120mm, hopper volume: 230l, max. lifting device load capacity: 250kg, operating hours: approx. 400h. 2) Piab vacuum unit, suction capacity: 21m³/h. 3) Vemag ASV 811 cutting device, year of manufacture: 2021, outlet shape: oval, arrangement: vertical, max. inclination: 20°, filling tube holder: Z design, weight: approx. 50kg. Including special nozzles in teddy shape and oval shape. Documentation vorhanden. An on site inspection is possible.
Krones PET Block 54/8 单块填充-封盖器概述 Krones PET Block 54/8 是一种二手单体成型，由旋转等压填充器和旋转螺丝 闭器组成，适用于PET瓶。该设备专为饮料生产和工 包装设计，非常适合集成到需要反压灌装和PCO 1881封闭应用的二手装瓶线中。配备54个固定加油阀和8 个封闭头，在大型PET格式上提供可靠性能，颈部操控 准。技术规格与性能数据配置：单一块填充器–封 器（填充器+
连续可调投药容量：60-1050毫升，长度：1750毫米，宽 ：650毫米，高度：1700毫米。设备：安装在不锈钢框 上，带四个旋转脚轮的移动装置，手动喂奶和取出瓶 子，自爆，配有填充管浸水装置，自动循环清洗，可 质和精炼凝乳，可用产品包括液体、乳糊、冷热牛 、酸奶、酸奶、凝乳、奶油奶酪、奶酪火锅、蜂蜜、 沙拉酱、蛋黄酱、果酱、蛋糕面糊等。现场检查是可 的，但不能在电力下进行
提供十二套配备体积渐进腔泵的ViscoTec（Z和L版本）及 集油料斗的投药系统。投药量范围：7.5毫升/转，流量 范围：75毫升/分钟-937.5毫升/分钟，投药精度：+/-1%， 大转速：125转/分钟，最大投药压力：30巴，最大入 压力：10巴。文档可查。现场检查是可能的
食品行业提供的大型罐装和封口机JBT FoodTech也可用。罐头重量：750克/1000克，罐内成分：加 糖炼乳，最大处理能力：600罐/分钟，装料头：22个， 闭头：5个，设计：单块，控制系统：西门子。文档 查。现场检查是可能的
A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.
PIAB 真空输送机 C3304-600 – 不锈钢 销售PIAB真空输送机C3304-600型，非常适合粉末和散装物 料（食品、药品、化工）。 不锈钢AISI 316L 输送能力最高可达约10–15 t/h 气动操作 滤波系统可达0.3微米 安静且低维护 二手，状况良好。 可通过安排观看
Simon Freres Simple Butter bulk packing is a semi-automatic 2-head filling machine designed for the bulk filling of boxes with butter type products into cartons. Currently this machine is set for carton boxes of 10 kg butter blocks. CIP Cleanable. Working principle: pre fold a carton box, manually place the box on the table of the machine, box has to be lined with a protective foil bag, box automatically moved up under the filling nozzle (opening of the foil bag is needs to be manually places around the filling nozzle), product is filled, table moves down until the required level of product, filled box moved manually. 1 head can be in filling position, while you replace the box on the other station. Pneumatic driven., Type of Machine: Butter Packing Machine, Capacity: up to 2.000 kg of butter per hour (output depending on block format), Box weight: 10 kg, Dimensions: 150 x 150 x 130 cm, ...
由一台REX TR/27 500毫升和1000毫升填充机组成，配备Tetra Pak纸板包装机TCBP32。此外，根据客户布局，该线路还 备独立传送带。 有了这些机器，他们拥有完整的生产线
由一台TBA 8 LSC 1000ml填充机组成，配备Tetra Pak托盘包装器TCBP70、Tetra Pak螺丝盖TCAP 47和Tetra Pak托盘收缩51。此外，根据客户布局，该线路还配备 立传送带。 有了这些机器，他们拥有完整的生产线
由一台TTB 19 250毫升基装机组成，配备Tetra Pak CBP32 V400纸板包装机和 Tetra Pak 吸管 SA 30。此外，根据客户布局，该线路还配备独立传送带 有了这些机器，他们拥有完整的生产线
包括一台TBA 19 V100 200ml基底填充机，配备Tetra Pak托盘Packer TCBP70、Tetra Pak吸管施压器TSA 21、Tetra Pak托盘收缩器51、Tetra TTS 51。此外，根据客户布局，该线路还配备独立传送带 有了这些机器，他们拥有完整的生产线
包括一台TBA 19 V 100 125ml细型填充机，配备Tetra Pak托盘Packer TCBP70、Tetra Pak吸管施用器TSA 21、Tetra Pak托盘收缩器51、Tetra TTS 51。此外，根据客户布局，该线路还配备独立传送带 有了这些机器，他们拥有完整的生产线
