Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor bel ...
Glass bottle filler and capper with short-tube filling valves for level filling (measured filling) of bottles. The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). The pinion control system was replaced in 2025. As part of this, all pinions were also replaced. The air ring for the lifting cylinders of the filling mechanisms was replaced around 2023., Additional title: Short-tube filler with pre-evacuation and crown cap sealer, Capactity: 44000 bo/h, Number of filling valves: 90 pcs., Number of capping heads: 15 pcs., Formats: 0,5 l NRW bottles; crown caps, Material: housing and contact surfaces from stainless steel, Base construction: caroussel-type filling and capping block, Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective h ...
Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data Line type: Complete automatic can filling line Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray Controls: PLC Siemens S7, Siemens SIMATIC HMI Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, ...
Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data Manufacturer: O+H / KHS Model: Hansacan can filler Seamer: Ferrum can seamer, F 505 G Year of manufacture: filler 1992, seamer 2010 Machine typ ...
Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data Capacity: 30,000 litres/hour Application: Carbonated mineral water Configuration: Carbonator with pumps, tank, and accessories CO₂ rate: max. 8 g/litre Drive: Siemens S7 Scope of Delivery Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system Pump system Tank | KHS Control system | Siemens | S7
Overview This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and ope ...
for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system - ...
桶清洗和装满系统，包括桶输送机、外部清洗机和旋 系统，用于内部清洁和装满。附加标题：清洗与装 ，容量：每桶60桶/小时，50升，操作/控制：西门子S7- 300，功能：旋转装料机（清洁和装填），桶运输，3个 CIP容器，控制
Labelling machine for wrap-around belly labelling of 0.5 and 1.0 l PET bottles. The paper labels are glued to the bottle with hot glue., Additional title: wrap-around labelling, Capacity: 24000 b/h, Current: 18 A, Voltage: 400 V, Frequency: 50 Hz, Formats: PET bottles, 0,5 l, 1,0 l, 1,5 l, Running direction: left -> right, Operation / Control: Simatic S 7-300, Material: stainless steel housing, Position: free standing, Base construction: rectangular, enclosed machine, on spherical feet, Features: housing with viewing window, labelling module for wrap-around paper labels, Robatech hot melt melter , Periphery: Leibinger Jet 3, best-before date printer
PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors
PETCYCLE箱用传送带，包括电动输送带和重力滚轮输送 。长度约70米，附加标题：箱运输路线，容量：4000箱 /小时，格式：可装20 x 0.5 l、9 x 1.0 l、6 x 1.0 l和6 x 1.5 l PET瓶的宠物自行车箱，操作/控制：控制面板/西门子 S7-300，材料：主要为不锈钢，位置：独立式，功能： 链输送机、滚筒输送机、输送机框架， 驱动、底结构、滴水盘、控制系
Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication
New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...
概述 该加压装置由德国制造商KHS于2013年制造。该压力填充 器仍在一家大型德国啤酒厂使用，随时可进行检查。 技术数据 容量：22,000 - 65,000 bph 加气站数量：168 封口站数：24 个螺距圆加注口：5040毫米 输送范围 阀门节点 真空装置 卫生进气口 加注液位及封闭检查 排斥和排斥带 技术文档 包括程序备份 提供大量运输车，可额外购
概述 玻璃卸盘器由德国KHS公司于2005年制造，直到最近还属 于德国一家乳制品公司的装瓶线。随着业主关闭生产 调色板正在发布。技术细节/范围 带升降和卸货的卸料机 配备中间层去除器和磁条 带滑动的顶层/盖板 封闭式输送机可单车道拉出成型瓶 包括防护围栏、托盘运输、卸货
- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...
Crate washer for PETCYCLE plastic crates, Additional title: Crate cleaning system, Capacity: 2950 crates/h, Power: 18 kW, Current: 38 A, Voltage: 230/400 V, Frequency: 50 Hz, Length: 7300 mm, Width: 1570 mm, Height: 1710 mm, Weight: 1900 kg, Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l , Running direction: transverse, Material: stainless steel, Position: free standing, Base construction: Self-supporting machine housing in block construction on spherical feet, Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner,
Packer for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Bottle holders: 5x20, 7x9 or 10x6 bottles., Additional title: Packing machine for bottle crates, Output according to design: 4000 crates/h, Current output approx.: 3000 crates/h , Air consumption: 0 Nm³/1000 bottles, Current: 17,59 A, Voltage: 220/400 V, Frequency: 50 Hz, Compressed air: 4 - 5 bar, Length: 3680 mm, Width: 2940 mm, Height: 2610 mm, Weight: 4200 kg, Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: converted to manual / PLC defective, Material: stainless steel / painted black steel, Position: free standing, Base construction: rectangular cycle packer machine on four columns with spherical feet, Features: Plexiglas safety screen opening upwards, safety grid, infeed and outfeed conveyors, packing head equipment for 0.5 l, 1.0 l and 1.5 l bottles, control panel conver ...
Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system., Additional title: PET bottle sanitising and filling system, Capacity: 24000 b/h , Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: Touch-Panel / Simatic S 7, Material: mainly stainless steel, Position: free standing, Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liqui ...
概述 该托盘器由德国KHS公司于2005年制造，直到最近还属于 德国乳制品公司的装瓶线。调色板正在发布，因为老 正在削减生产。技术细节/范围 操作8单元托盘/箱（4x2）托盘装载机，带快门头，包 防护围栏、托盘运输、托盘运输、托盘转动机、成型 台、空托盘弹
该无菌罐由KHS制造，专为无菌生产过程中饮料的安全 间储存而设计。该罐源自工业饮料加工线，符合食 和饮料行业要求的高卫生和技术标准。 技术规格： 制造商：KHS 类型：无水缓冲罐 制造年份：2007年 储存介质：饮料 容量：约18,000升 最大压力：7巴 最低压力：-1巴 过压：10.5巴 温度范围：20-130摄氏度 接触材料：不锈钢306 设计：无菌、食品级、高酸兼容 主要特点与优势： 适合无菌饮料加工 高产品安全和卫生标准 坚固耐用的工业设计 作为填充和加工线路中的缓冲或中间罐的理想选择 长期运行的KHS质量经过验证 该无菌缓冲罐是饮料生产商、装瓶商或工厂运营者寻 可靠且卫生储存系统的极佳解决方案。如需更多技 细节、文件或检查选 ...
全自动集成的静水PET填充线，设计用于吹气、填充、 口、标签、检查、二次包装、托盘化和托盘包装， 现同步生产流程。 规格 制造商：KHS 模型填充线PET 54,000 BPH 2014年 使用的状态 库存编号103814 静水生产 运力：54,000 每小时 KHS InnoPET 喷气、填充与封闭块 吹塑机 KHS Blowmax 24S AF CE46B 压缩机系统 检验系统 PRESSCO 第五系列 FHCP3X Labeller Simpl-Cut Flex 1420-45-bl，2021年 收缩包装商 KHS Innopack Kisters TSP KHS Innpal PBL 1 N （H） RG 1 托盘系统 兰泰克SLC-AUTO托盘包裹，2015
全自动集成的静水PET填充线，设计用于吹气、填充、 口、标签、检查、二次包装、托盘化和托盘包装， 现同步生产流程。 规格 制造商：KHS 模型填充线PET 54,000 BPH 2016年 使用的状态 库存编号103813 静水生产 运力：54,000 每小时 吹气、填充与封盖块 KHS INNOPET 吹填单块 滚送PE模块标签机，标记站：2个 瓶检系统瓶检器 KHS Innopack Kisters SP收缩包装机 KHS托盘系统，双机械臂 托盘包裹KHS，旋转
全自动PET静水充填线，设计用于高效吹瓶、装填、封 、贴标、检查、二次包装和托盘化，实现同步生产 程。 制造商：KHS 模型填充线PET 32,000 BPH 2009年 使用的状态 库存编号103812 静水生产 容量：32,000 每小时 PET吹塑机KHS Blowmax 16S IV系列 单块式KHS加注，机械加注阀：50 标签机PE，滚筒送料站：1 瓶检系统瓶检器 调色器阿尔维881 Lantech托盘包装机，型号：S1500
完整的PET填充线专为静水生产设计，涵盖从预成型品 料到托盘化最终产品的整个过程。该产品线包括预 型、PET瓶吹塑、瓶洗和重力填充、预制塑料封盖、标 签贴花、瓶检、输送、收缩包装、托盘化和拉伸膜包 。所有机器均集成一体，确保稳定运行、高效和稳 性能，额定速度可达每小时43,000瓶。 规格 制造商：KHS 模型填充线PET 43,000 BPH 2008年 使用的状态 库存编号103809 静水生产 吹塑成型 Blowmax 24 KHS CIP系统 KHS Innofill-NV PET 填充与封闭系统 贴标签PE，简单切割Flex CI 1120 30 收缩包装 道格拉斯 M-75（2007），电影首映版 托盘器Alvey 880，推送系统 托盘包装 Lantech S1500，带预拉伸旋转
该系统由2004年生产的KHS INNOPAL RK6-350托盘机、KUKA KR 360/1工业机器人和西门子Simatic S7自动化控制器组成。该系统适用于纸盒、瓶子或PET 装产品的自动托盘整理。
该码垛机由德国公司 KHS 于 2005 年制造，直到最近还是一家德国乳制品公司的灌装线 一部分。 码垛机现已随着业主停止生产而释放。 2021年，该系统在控制和安全技术方面进行了全面改造 。 技术细节/范围 适用于 8 个托盘/纸箱 （4x2） 托盘装载机 带盲头 包括保护格栅， 托盘运输、托盘运输、托盘翻转机、成型台、中间层 入物、中间层料库、空托盘料库 现已上市
该码垛机由德国公司 KHS 于 2005 年制造，直到最近还是一家德国乳制品公司的灌装线 一部分。 码垛机现已随着业主停止生产而释放。 2021年，该系统在控制和安全技术方面进行了全面改造 。 技术细节/范围 适用于 8 个托盘/纸箱 （4x2） 托盘装载机 带盲头 包括保护格栅， 托盘运输、托盘运输、托盘翻转机、成型台、中间层 入物、中间层料库、空托盘料库 现已上市
