BIESSE бывшая в употреблении машина на продажу

Minimum panel length 140 mm Minimum panel width: 85 mm Min/max thickness of panel: 10/60 mm Min/max edge thickness: 0.4/3 mm Feed speed: 10/14/20 m/min Compressed air: 7 bar Power requirement: 415 V - 3 phases

Suitable for drilling, milling and grooving of panels. Equipped with a tool magazine for up to 8 tools. Including manifold. Incl safety pressure mats. Equipped with Dongle with software package You are responsible for dismantling and transporting this lot. There are no tools available. Pick-up of this lot is only possible on May 22, 2024 and not on the regular 1st collection day.

3 axis machine, Year of Build 2007, Machine No. 78920, Recording HSK F63, 4x horizontal drilling, 14x vertical drilling, 12 change positions, X-axis 3640 mm, Y-axis 1524 mm, Z-axis 180mm, Includes 2x vacuum pump, Busch RA 0305 D 503 ZZZZ, With safety mats, Software Biesse works, Excluding tools; In-output table included, Dismantled for transport on normal trailer; 13000x2400x2400mm;, Own weight 7000+600kg, Video available

Обрабатывающий центр с ЧПУ, производитель: BIESSE, тип: Skipper 100, год постройки: 2009, серийный номер: 68680, 6,5-7,5 бар / 30 м/сек / 2 700 кг, с защитным ковриком/запорным устройством, всасывающим трубопроводом до каретки, панелью управления и боковым столом с аксессуарам�

Сверлильный центр с ЧПУ, производитель: BIESSE, тип: Skipper V31, год выпуска: 2015, серийный номер: 1000003511, 7 бар / 30 м/сек / 1 300 кг, с всасывающим трубопроводом до задвижк�

Автоматический сверлильный станок 2-линейный, Производитель: BIESSE, Тип: Ядро-автоматический сверлильный станок, Год выпуска: 2010, Серийный номер: 66616

Автоматический сверлильный станок 1-линейный, производитель: BIESSE, тип: Kernel-автоматический сверлильный станок, год выпуска: 2010, серийный номер: 73082

Description: Number of spindles for vertical drilling: ,14 + 12 Number of spindles for horizontal drilling 4-sided: ,6 + 2 Max. panel thickness: 115 mm Spindle speed: ,4000 rpm Routing rotation speed: 1000 - 24000 rpm Routing: ISO 30  ,  ,  , vacuum pump: 120 m³/h, serial number: 60,835, total electrical load: 14 kW, 5-axis machining: Yes, Number of vacuum pumps: 1 pieces, x-motion: 3,372 mm, y-motion: 1,200 mm, z-motion: 125 mm, path-feed rate max. X-axis: 75 m/min, path-feed rate max. Y-axis: 75 m/min, path-feed rate max. Z-axis: 15 m/min, saw unit: 0 - 90 graden roteerbaar, control: NC481, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,000 mm, weight approx.: 4,500 kg

Description: X stroke: 3390 mm Y stroke: 1850 mm Z stroke: 180 mm - HSK63 electro-spindle - 4 axes - 24-spindle vertical drilling unit - 6 horizontal milling unit - blade groove - 8-beam work surface - pivoting suction cups - work areas - clamps - BIESSE WORKS software and panel optimisation - 12-position tool magazine on Z carriage - Independent blade for grooving in the X axis - Front protection and safety system with belt - Perimeter protection grids - Automatic lubrication system - Air conditioning system for cooling and cleaning the machine control unit - Vacuum pump mc / h 250 - with electrical cabinet - Accessories (32 milling cutters, drills, etc.) Machine sold without tools or accessories Approx. Onsite Dimension. (l x w x h): 13,000 x 2,200 x 2,600 mm, weight approx.: 4,650 kg

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: X: 4500mm Y: 1300mm Z: 180mm 4 Axes 250m3/h vacuum pump ATS work table with 4 suction trolleys Predisposition for ATS vices and clamps 16 suction cups Horizontal milling head 5 HP ROTARY tool magazine on 16position carriage Rapid ROTARY tool magazine 6 Positions Electrospindle 12 HP HSK63 F Vertical and horizontal drilling block 16 chucks Machine sold wthout tools or accessories Approx. Onsite Dimension. (l x w x h): 7,450 x 4,570 x 3,500 mm, weight approx.: 2,800 kg

Description: Machining center BIESSE ROVER C9.50 Serial number: 71421 Year : 2012 Availability : Weight with electrical cabinet: 6350 kgs Technical specifications : - Working range in X axis mm 4600 - Working range in Y axis mm 1935 - Working range in Z axis mm 275 - Numerical control with Biesse Bsolid software -No. 2 jobsite - Worktop bar - 8 bars electronically adjustable by C.N. for suction cup support - 6 pneumatic bakelite bars for panel lifting - 3 C.N. electronically adjustable suction cups for each bar with vacuum seal to secure panel during machining panel during machining - 1 vertical 5-axis interpolated electrospindle, with automatic tool changer, 18 kW motor, liquid-cooled, HSK 63 type cones - 1 vertical electrospindle with Vector C-axis, with automatic tool changer, liquid-cooled, cones type HSK 63 - 22-position automatic tool-changing system - positioned at the rear of the ...

Description: Machine Specifications: Model: BIESSE ROVER B 4.50 Year of Manufacture: 2006 Operating System: BiesseWorks on Windows XP Number of Axes: 3 X-axis: 5220 mm Y-axis: 1750 mm Z-axis: 225 mm Spindles: 1 Main Motor Power: 12 kW Maximum RPM: 18000 Work Area: Effective Work Area: 6m x 1.3m Workpiece Depth: Adjustable (slightly larger than the nominal depth) Tooling: ISO30 Tool Holder Toolholder Included (Tools not included) Variety of toolholders, including saw aggregate for X, Y, or 45° cuts Tool Magazine: Capacity: 12 positions Table Configuration: 8 Tables 4 Vacuum Blocks per Table Additional Features: Serial Number: 71035 3-Axis Machining Year of Construction: 2006 Air Supply: 7 Bar Mass: 5700 kg Power Supply Voltage: 380 VAC Rated Current: 38 A Number of Power Supply Phases: 3 Power Consumption: 21.1 kW Frequency: 50 Hz Biess ...

Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unit Approx. Onsite Dimension. (l x w x h): 10,700 x 1,250 x ...

Description: serial number: 59639 Technical specifications: working width: min 205 mm max: 3200 mm working depth: min 100 mm max 1200 mm passage height: min 8 mm max: 60 mm control and program system two section conveyor, with inverter and automatic adjustment by NC regulation of the measurements of the backstops in automatic by NC number. 4 Double manual pression units number. 6 Panel supports number. 2 Horizontal heads, each with number. 1 motor 2.3 HP and 20-spindles chuck unit number. 6 Vertical bottom heads 96 mm width pneumatically operated, number. 2 motors 1.8 hp and number. 2 boring chucks quick positioning of the heads along the beam ('X' axis) by means of rack and pinion and crank for fine adjustment with encoder for position indication quick positioning of each chucks crosswise direction ('Y' axis) by means of a ball screw and crank for fine adjus ...

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change de ...

Description: Biesse Rover A4.55 - CNC Center , Model: Biesse Rover A4.55 Type: 4-axis CNC Center Year: 2010 Working Area: 5500mm x 1250mm Rails: 10 Tooling: Router, Drilling Unit, Horizontal Motor Axis: 4-axis (including C-axis) Tool Magazine: 20 positions (Without tools) Aggregates: Floating, 1-exit, 2-exits, Sawblade Tool Holder Type: ISO30 Features: Reference Stops, Detection Sensors, Thickness Measurement vacuum pump: 250 m³/h, 5-axis machining: No, x-motion: 5,680 mm, y-motion: 1,460 mm, z-motion: 200 mm, Approx. Onsite Dimension. (l x w x h): 7,900 x 4,500 x 1,980 mm, weight approx.: 3,900 kg

CNC machining center Biesse Rover A1542 Year of production 2021 Working fields : X = 4140 mm Y = 1560 mm Z = 275 mm C = 360 degrees 8 pcs. of ATS beams - 24 carriages 8 pcs. Rear line bumper, stroke 115 mm, extension 25 mm 8 pcs. Middle line bumper, mounted at 685 mm, stroke 140 mm 8 pcs. Front line bumper, stroke 1348 mm, extension 140 mm. 4 side bumpers with 140 mm stroke (2 left + 2 right) including pneumatic installation. 4 removable center bumpers with 140 mm stroke (2 Left + 2 Right) including pneumatic installation. BUSCH pump with a capacity of 290 m3/h Electro-spindle 13.2 kW (17.7 hp) HSK F63 and air cooling BH 29 2L drilling head with automatic lubrication. 16-position turreted tool magazine mounted on X-axis carriage 8-position magazine for quick tool change In addition, HSD angle aggregates The machine has only 2000 hours of operation

Кромкообрезной станок с ЧПУ служит для кромки изогнутых и фасонных панелей Толщина панели: 16 - 50 мм. Толщина кромки: 0,8 - 3 мм. Размеры: мин. 400 x 400 мм, макс. 1800 x 1800 мм 650 x 2500 мм Блок 1: клеевой валик с краевым магазином Клеевой бачок емкостью 3 л. Блок 2: двигатель двигателя торцевой обрезки 0,8 кВт Блок 3: Двигатель триммера 2 x 2,2 кВ�

X-Axis travel 3640 mm Y-Axis travel 1342 mm Z-Axis travel 225 mm X-Y-Z axes speed 80 - 80 - 30 m/min Chip suction socket ⌀ 250 mm Loadable piece 180 mm Installed power 22 kVA Working air pressure 7.5 bar Air consumption for dust extraction 5300 m3/h Dimensions L 5865 x W 4650 x H 2560 mm Weight 3900 kg

This Biesse Rover 321R Machining Wood Working machine was manufactured in the year 1995 in Italy. It is equipped with a CNI NC 481 control unit. The machine has a spindle speed of 15000 rpm.

This BIESSE Rover 321 R Wood machine was manufactured in the year 1998 in Italy.

Machining center in impeccable condition. Very few hours of work. Sold due to change of country of residence.

Rover Machining center biesse rover c6.50 very good condition about 6000 h, one 4 axis spindle, 1 3 axis spindle, drilling block biesse works software Machine visible in operation

Machining center Biesse Rover B 4.50 The machine is in very good condition and is regularly serviced. Biesse Works software Remote control for manual control Automatic tool change system with 12 positions - located on the working head Working area in the X axis 4600 mm The working area in the Y axis is 1342 mm

Working table 6 beams for 3 trolleys 12kw ISO 30 spindle electro-spindle Vacuum pump 250 Revolver tool magazine, 10 items Drilling head Bh21L 14 vertical / 6 horizontal spindles A ball to make grooves Drilling head after major refurbishment Becker pump replaced with a new one in 2014, in 2017 listed graphite vanes The latest version of BiesseWorks has been loaded in the machine Machine serviced, in constant use

220 x430 cm flat fiber table and double 250 cm Bekcer vacuum engine Boring group and milling separate motor There is a hole group that can be connected to a side hole and saw. 10 vertical drill clamping capacity

NESTING MACHINE IN EXCELLENT CONDITION WITH AUTOMATIC LABEL PRINTING AND AUTOMATIC LOADER/UNLOADER, 3 AXIS

Biesse Rover 23 Numerically Controlled Machining Center, currently in use and maintained by Biesse Iberica Milling, drilling, cutting, pocketing, etc... Working field in X axis 2900 mm Working field in Y axis 1300 mm Working stroke in the Z axis 150 mm