We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usava
The injection molding machine is fully operational, it is constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 35,000 h.
usava
2 injection molding machines BATTENFELD HM 65/210 The injection molding machines are fully operational, they are constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 52,000. The price is for one injection molding machine.
usava
Granulation line consisting of: a system of gravimetric mixers TGP-5 for 4 components with pneumatic loaders of the TAL -920G brand 2018, with a capacity of 2x700 kg / h, an extruder Battenfeld BEX 2-107 / 22 with a receiving hopper, power -75 kW, productivity-600 kg / h; hot water ring cutting device, cyclone GXC2660 and storage hopper.
usava
- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: 1078 cc - Injection weight: 981g - Tool closing system: 3500/... - Closing force: 350 t - Tool plate dimensions: 1010 x 1010 mm - Clearance between columns: 710 x 710 mm - Tool height: 300...710 mm - Opening distance: 670 mm - Max. Distance of plates: 1380 mm General information: - Dimensions (m) LxWxH: 7.60 x 1.80 x 2.40 m - Weight: 15,300 kg ROBOT - Year 2005
usava
Injection molding machine by Battenfeld Wittmann. The injection molding machine is from 2018 and has been with us since the news, serviced only in Battenfeld Polska, full history, documentation. The injection molding machine has only 6600 hours of working life. Injection molding machine like new. Upper injection unit - not used, turntable - not used. screw diameter mm 30 specific injection pressure bar 2042 calculated injection volume ccm 106 screw L / D ratio 22 plasticization efficiency g / s PS 12 air injection speed - standard ccm / s 85.7 Cylinder heating system power kW 10.4 SmartPower Rotary Table Table diameter mm 750 Table height mm 140 Table weight kg 1,200 Time of table rotation by 180 ° sec 1.2 Max weight of the mold kg 600 Number of connections 4 x G3 / 8 Max weight of the mold on the turntable kg 1,000 power of the drive system kW 37 oil tank cap ...
usava
Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition
usava
Control B4 1. Plasticizing system with a diameter of Ã45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet. - 06.B21 robot connection according to Euromap 67 - 06.D10 charging zone temperature set from the level of the control system 4. 06.K40 Quality table 5. 06.K01 Graphic functions of a ...
usava
Battenfeld TM 550/4500 Injection Moulding Machine 550 Ton 55 Kw Working hour: 48500
usava
Battenfeld TM Xpress 270/1350 injection molding machine is on sale 2011 Battenfeld TM Xpress 270/1350 Injection molding machine
usava
BATTENFELD 400/150 S-KS /⦠/ 12/80 injection molding machine Year of prod. 1981 The machine is fully operational, not used for 5 years, ready for transport
usava
Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine
usava
800t clamping force Battenfeld machine, year 2008 The machine was used for a project in the auto industry but the last months there is no work for this machine. Clamping force 800.0 T Screw diameter 85.0 Tie bar spacing (H) 1120.0 Tie bar spacing (V) 1020.0 Shot volume 2412.0 Shot weight 2195.0 Pressure on material 2110.0 bar Platen length 1620.0 Platen width 1530.0 Robot interface E67 Number of cores 4.0 Number of heating zones
usava
Robotic - NO Control - B4 Screw diameter - 75 [mm] Specific injection pressure - 1739 [bar] Injection volume - 1657 [cm3] Injection weight - 1508 [g] Injection unit - 2800 [mm] Closing force - 4500 [T] Tool Locking System - Knee System Tool plate size - 1120 [mm] Clearance between columns - 800 [mm] Opening distance - 760 [mm] Maximum distance between plates - 1530 [mm] Ejector stroke - 250 [mm] Pump capacity - 55 [kVA] Tank heating system power - 43 [kVA] Controls and description - ENGLISH Full documentation - YES Hours worked - 76 200 Pickup date - 6 months Dimensions (length x width x height) - 8255 x 1795 x 2330 [mm] Weight - 20 400 [kg] The machine has a new cooler, hydraulic accumulators. The pump is regenerated. The machine will be available in February 2021.
usava
Used Battenfeld for sale, it has broblem with frequency converter the pump motor is not working as it should Battenfeld BK-T 2750/1000 Injection moulding machine
usava
Referência: 18140 Produtor: BATTENFELD Ano construção: 2006 Unidade de fixação Força de fixação: 25 tonelada Curso de abertura: 450 mm Distância entre barras de amarração: 270 X 270 mm Altura do molde mín.: 150 mm Unidade de injeção Diâmetro do parafuso: 14 mm Volume de injeção: 15 cm³ Peso do tiro: 7 g Pressão de injeção : 2650 bar Medidas e peso Dimensoes: 2,25 X 0,90 X 1,30 m Peso da máquina: 1100 quilogramas
usava
The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usava
O árbitro. no.: 16369 Produtor: ANO DE CONSTRUÇÃO: 2005 Força de aperto da unidade de aperto: 75 toneladas Curso de abertura: 800 mm Distância entre barras de gravata: 405 x 405 mm Altura do molde min.: 150 mm Altura do molde máx.: Unidade de injeção de 480 mm Diâmetro do parafuso: 18 mm Volume de injeção: 30 cm³ Caro de carga: 27 g Pressão de injeção: 2440 medidas de barras e dimensões de peso: 4,5 x 1,7 x 2,0 m Peso da máquina: 4500 kg
usava
Potência: 5,5 KW Recetor: 50 L peso da máquina ca.: 0,450 t dimensões da máquina ca.: . m pressão de alimentação: 330 bar litro capacidade: .
usava
Não éusada Controlo UNIROB B4 (ecrã tátil 8.4 TFT) Eixo X=1000 (39.4) com motor servo Eixo Y=1000+1000 (78.7) com motor servo Eixo Z=4000 (127.5) com motor servo Interpolação de movimentos. Precisão de repetição de +/- 0,1 mm. Peso máximo, incluindo aderência: 20 kg. Pressão pneumática: 6 barras Velocidade máxima: 3.000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Controlo: UNIROB B4 - Curso (X): 1.000 (39,4) com servo mm - Curso (Y): 1.000+1.000 (78.7) com servo mm - Curso (Z): 4.000 (127,5) com servo mm - Velocidade de descolagem: 3.000 mm/s - Carga útil: 20 Kg
usava
Máquina usada em bom estado. Disponível para entrega imediata. - Força de aperto: 1.600 kN - Diâmetro do parafuso: 50 mm - Pressão de injeção: 1.714 bar - Volume de injeção: 442 cm? - Distância entre tie-bars (h x v): 570 x 520 mm