Ejection stroke: 35mm, weight: 700kg.
Clamp force: 750kN, heating output: 11kW, weight: 3t.
Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.
Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.
Clamping force: 85t, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
There are two identical injection moulding machines available.
Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.
Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.
There are eight ARBURG Allrounder 220M available.
Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.
Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible.
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
Distance between tie-bars: 520x520mm, screw diameter: 54mm, pump motor: 39kW, connected load: 44.9kW, weight: 6.63t, operational hours counter: 107,000h.
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.
Connected load: 42kW.
Connected load: 40kVA.
Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.
Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.
Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.
Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.
Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.
Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.
Clamping force: 1300kN, approach force: 50kN, opening force: 35kN/increased 350kN, opening stroke: 500mm, mold installation height: 250mm. Distance between platens: 750mm, clear column distance: 420mm x 420mm, mold platens: 605mm x 605mm. Movable mold half weight: 650kg, ejector force: 40kN, ejector stroke: 175mm. Screw diameter: 35mm/40mm/45mm, effective screw length: 23/20/18 L/D, max. screw stroke: 145mm, stroke volume: 139cm³/182cm³/230cm³. Shot weight (hp): 127/166/210g, injection pressure: 2500bar/2000bar/1650bar, injection flow: 128/168/212cm³/s, back pressure: 350bar/160bar, screw circumferential speed: 47/53/60m/min. Oil filling: 235l, dimensions X/Y/Z: approx. 4350mm/1600mm/1800mm, weight: approx. 4900kg. Including conveyor belt, Geiger handling, carousel, temperature control units. Operating hours pump/automatic operation: approx. 89000h/83000h. Documentation available. On ...
Description hopper capacity: 100 lt air flow: 90/20 m3 / h temperature range: 50-150 C absorbed power: 6.2 Kw power supply: 400 V
Description COMPLETE ISLAND DIMENSIONS 7800 X 4000 X H4300 Press with second lateral injection press with rotary table thickness 166mm mold heating 12 zones Integrated Cartesian robot MULTILIFT V 15Kg Year 2011 X axis: 900 mm Y axis: 1400 mm Z axis: 3200 mm Motors: brushless B axis; not present C axis rotation: 90° Max load: 11 kg Interface integrated into the press
Description SERVO PUMP WITH BRUSHLESS DRIVE 6 HOT ROOM ZONES EUROMAP 67 INTERFACE COLORIZER INTERFACE BATTERY WITH 3 ADDITIONAL FLOWMETERS
